Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
125 Pages « < 115 116 117 118 119 > » Bottom

Outline · [ Standard ] · Linear+

 AMD® Socket-AM2 Overclocking thread (V2), discuss our setup/overclocking issues

views
     
coolkwc
post Oct 15 2007, 04:30 PM

Fall in love with audio again.
*******
Senior Member
3,112 posts

Joined: Jul 2006
QUOTE(-pWs- @ Oct 15 2007, 04:23 PM)
Errmm..your ram is it plug to the nearest slot to CPU??
And i found out that you are using Command Rate 1T.
Use 2T instead to gain stability. smile.gif

-pWs-
*
nope...the RAM not plug in the two slot there...the RAM is only run 600Mhz by default, only OC it can run in "normal" speed 667Mhz sweat.gif , so overheating is impossible...
This just one of those setting used...1T and 2T yield the same result, so why not i just using 1T....

This post has been edited by coolkwc: Oct 15 2007, 04:31 PM
-pWs-
post Oct 15 2007, 04:33 PM

Look at all my stars!!
Group Icon
Elite
8,545 posts

Joined: Aug 2006
From: 224.0.0.6
QUOTE(coolkwc @ Oct 15 2007, 04:30 PM)
nope...the RAM not plug in the two slot there...the RAM is only run 600Mhz by default, only OC it can run in "normal" speed 667Mhz sweat.gif , so overheating is impossible...
This just one of those setting used...1T and 2T yield the same result, so why not i just using 1T....
*
Trust me bro.
Ram plug into the nearest slot to the CPU. And set Command rate to 2T.

-pWs-
coolkwc
post Oct 15 2007, 04:51 PM

Fall in love with audio again.
*******
Senior Member
3,112 posts

Joined: Jul 2006
QUOTE(-pWs- @ Oct 15 2007, 04:33 PM)
Trust me bro.
Ram plug into the nearest slot to the CPU. And set Command rate to 2T.

-pWs-
*
Yap...the result....SAME...the command rate won affect in this case as i try before adi...
anyway, mind to explain why u take those action by plug the ram into nearest slot to the cpu? sweat.gif
Amedion
post Oct 15 2007, 04:54 PM

It's a bird! No, it's a plane! No, it's star
*******
Senior Member
3,377 posts

Joined: Jul 2005
From: Klang
OMg.. Unable to Flash back my BIOS.. Can anyone guide me?

MAde bootable floopy disk .. Copied AWDFLASH.exe and N5TAA531.bst file into the floopy disk ..

Then boot up and type Awdflash n5taa531.bst/py/sn/r but cannot..
-pWs-
post Oct 15 2007, 04:55 PM

Look at all my stars!!
Group Icon
Elite
8,545 posts

Joined: Aug 2006
From: 224.0.0.6
QUOTE(coolkwc @ Oct 15 2007, 04:51 PM)
Yap...the result....SAME...the command rate won affect in this case as i try before adi...
anyway, mind to explain why u take those action by plug the ram into nearest slot to the cpu? sweat.gif
*
Ermm..how to say ler? The memory controller is integrated in the CPU. I think you know that.
Then, if you plug to the nearest slot to the CPU, there will be less circuitry to reach your ram.
It works for me at least. Trust or not up to you. icon_rolleyes.gif
Last time i plug to the 3rd n 4th slot, i managed to get to 2.4GHz but w high vcore.
But once i plug to 1st n 2nd, i managed to get 2.6GHz w lower vcore than the previous case.
I experienced myself, i do advise you that better you change to the nearest slot.
You will see magic appears in front of you.
If you still suspect, you can ask anyone here. I can guanrantee everyone here will recommend you plug in to the nearest slot to the CPU. smile.gif

-pWs-

This post has been edited by -pWs-: Oct 15 2007, 04:56 PM
coolkwc
post Oct 15 2007, 05:00 PM

Fall in love with audio again.
*******
Senior Member
3,112 posts

Joined: Jul 2006
QUOTE(-pWs- @ Oct 15 2007, 04:55 PM)
Ermm..how to say ler? The memory controller is integrated in the CPU. I think you know that.
Then, if you plug to the nearest slot to the CPU, there will be less circuitry to reach your ram.
It works for me at least. Trust or not up to you. icon_rolleyes.gif
Last time i plug to the 3rd n 4th slot, i managed to get to 2.4GHz but w high vcore.
But once i plug to 1st n 2nd, i managed to get 2.6GHz w lower vcore than the previous case.
I experienced myself, i do advise you that better you change to the nearest slot.
You will see magic appears in front of you.
If you still suspect, you can ask anyone here. I can guanrantee everyone here will recommend you plug in to the nearest slot to the CPU. smile.gif

-pWs-
*
Nevertheless, it not works for me...I think i will throw away that board soon, because i don't want to waste my water cooling system...
Amedion
post Oct 15 2007, 05:24 PM

It's a bird! No, it's a plane! No, it's star
*******
Senior Member
3,377 posts

Joined: Jul 2005
From: Klang
Can someone help me on flashing Bios via bootable floopy disk .. ? T_T
-pWs-
post Oct 15 2007, 05:25 PM

Look at all my stars!!
Group Icon
Elite
8,545 posts

Joined: Aug 2006
From: 224.0.0.6
QUOTE(Amedion @ Oct 15 2007, 05:24 PM)
Can someone help me on flashing Bios via bootable floopy disk .. ? T_T
*
1. What motherboard you using?
2. Award or AMI??

-pWs-
Amedion
post Oct 15 2007, 05:40 PM

It's a bird! No, it's a plane! No, it's star
*******
Senior Member
3,377 posts

Joined: Jul 2005
From: Klang
QUOTE(-pWs- @ Oct 15 2007, 05:25 PM)
1. What motherboard you using?
2. Award or AMI??

-pWs-
*
Biostar T550 ..

AWARD .. Downloaded AWDFLASH.exe .. Created bootable floopy disk..
Copied the BIOS.bst and AWDFLASH.exe into the floopy disk..
Then let it boot ..
Type awdflash n5taa531.br/py/sn/r like instructed in manual.. can't work ..
Then type awdflash.exe .. A menu appear asking me to key in the filename of BIOS file.. I key in N5TAA531.bst .. Ask me to wait.. Then fail..
CV6149
post Oct 15 2007, 05:41 PM

La Furia Roja!!
******
Senior Member
1,347 posts

Joined: Jan 2003
arghhh..i dont get a good result from my F3 proc...
there is a serious prob in my rig...

now koyak from raya impact.....
dblooi
post Oct 15 2007, 05:50 PM

......
******
Senior Member
1,404 posts

Joined: Apr 2006
From: ......
QUOTE(CV6149 @ Oct 15 2007, 05:41 PM)
arghhh..i dont get a good result from my F3 proc...
there is a serious prob in my rig...

now koyak from raya impact.....
*
what's the problem?
-pWs-
post Oct 15 2007, 05:52 PM

Look at all my stars!!
Group Icon
Elite
8,545 posts

Joined: Aug 2006
From: 224.0.0.6
QUOTE(Amedion @ Oct 15 2007, 05:40 PM)
Biostar T550 ..

AWARD .. Downloaded AWDFLASH.exe .. Created bootable floopy disk..
Copied the BIOS.bst and AWDFLASH.exe into the floopy disk..
Then let it boot ..
Type awdflash n5taa531.br/py/sn/r like instructed in manual.. can't work ..
Then type awdflash.exe .. A menu appear asking me to key in the filename of BIOS file.. I key in N5TAA531.bst .. Ask me to wait.. Then fail..
*
Ermm... the floopy drive and disk confirm can use??

QUOTE(CV6149 @ Oct 15 2007, 05:41 PM)
arghhh..i dont get a good result from my F3 proc...
there is a serious prob in my rig...

now koyak from raya impact.....
*
Really very weird bro. How bout using lower cpu multiplier??

-pWs-
choyster
post Oct 15 2007, 05:56 PM

Regular
******
Senior Member
1,802 posts

Joined: May 2006
QUOTE(Amedion @ Oct 15 2007, 04:10 PM)
What processor are you using?  smile.gif

You have to flash to latest bios which supports Ram voltage adjustable for more Oc ability...  thumbup.gif
*
amd x2 4000+
Amedion
post Oct 15 2007, 06:05 PM

It's a bird! No, it's a plane! No, it's star
*******
Senior Member
3,377 posts

Joined: Jul 2005
From: Klang
Ya floopy disk drive can use.. Or need to rename the file to .bin ?
Anyone tried flashing via DOS screen before?

OMG, i cannot believe the floopy disk drive now making weird noise and fail to use.. ARgh ~ ! So bad luck.. !
xixo_12
post Oct 15 2007, 06:15 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
QUOTE(coolkwc @ Oct 15 2007, 05:00 PM)
Nevertheless, it not works for me...I think i will throw away that board soon, because i don't want to waste my water cooling system...
*
lepak la dulu.. try first...whre do u live.././.. dony giv up first
-pWs-
post Oct 15 2007, 06:16 PM

Look at all my stars!!
Group Icon
Elite
8,545 posts

Joined: Aug 2006
From: 224.0.0.6
QUOTE(Amedion @ Oct 15 2007, 06:05 PM)
Ya floopy disk drive can use.. Or need to rename the file to .bin ?
Anyone tried flashing via DOS screen before?

OMG, i cannot believe the floopy disk drive now making weird noise and fail to use.. ARgh ~ !  So bad luck.. !
*
Hope this link helps you.

http://www.biostar.com.tw/app/en-us/support/faq.php?S_ID=81

-pWs-
Amedion
post Oct 15 2007, 06:22 PM

It's a bird! No, it's a plane! No, it's star
*******
Senior Member
3,377 posts

Joined: Jul 2005
From: Klang
QUOTE(-pWs- @ Oct 15 2007, 06:16 PM)
Hope this link helps you.

http://www.biostar.com.tw/app/en-us/support/faq.php?S_ID=81

-pWs-
*
Tried that .. Unable to flash .. sweat.gif
-pWs-
post Oct 15 2007, 06:25 PM

Look at all my stars!!
Group Icon
Elite
8,545 posts

Joined: Aug 2006
From: 224.0.0.6
QUOTE(Amedion @ Oct 15 2007, 06:22 PM)
Tried that .. Unable to flash ..  sweat.gif
*
Ops. Then you have to wait for Biostar's owner already.
Sorry icon_rolleyes.gif

-pWs-
CV6149
post Oct 15 2007, 06:29 PM

La Furia Roja!!
******
Senior Member
1,347 posts

Joined: Jan 2003
QUOTE(dblooi @ Oct 15 2007, 05:50 PM)
what's the problem?
*
ultra2-m2 mobo

unable to get pass 2.7g even with higher clock.
I suspected a psu problem...

pws suggest to try with my old mobo kn9 ultra..

did help but just till 2.9ghz,

i really suspect the psu is the culprit...
pws suspect ram issue.

ram is mushkin value.
max stable running is 900@2.2v with 4-4-4-15


reason:

1)450w acbel around 2+ year.
2)dfi is using an older chipset nf4 ultra which i suspect using more power for mobo,evidence from chipset voltage 1.5 vs 1.2 in newer nf500.same goes to htt voltage too 1.35 vs 1.2v

this maybe the reason that explain why with dfi manage only 2.7 with ALL the proc i ever had.I didnt suspect all this time bcoz i thought 2.7 is the max limit of all the proc..now with F3,the max limit is beyond that of coz.

in kn9-since the mobo use a lesser voltage/power for mobo therefore able to get till 2.9g bcoz of this reason.More headroom for any voltage.


this is just my theory..anyone have any good psu to lend me for 1 day test?? hehehehe

any idea guys???


This post has been edited by CV6149: Oct 15 2007, 06:40 PM
tachlio
post Oct 15 2007, 06:35 PM

de~sign "ing"
*******
Senior Member
3,102 posts

Joined: May 2005
From: Penang *̡͌l̡*̡̡
QUOTE(-pWs- @ Oct 15 2007, 04:55 PM)
Ermm..how to say ler? The memory controller is integrated in the CPU. I think you know that.
Then, if you plug to the nearest slot to the CPU, there will be less circuitry to reach your ram.
It works for me at least. Trust or not up to you. icon_rolleyes.gif
Last time i plug to the 3rd n 4th slot, i managed to get to 2.4GHz but w high vcore.
But once i plug to 1st n 2nd, i managed to get 2.6GHz w lower vcore than the previous case.
I experienced myself, i do advise you that better you change to the nearest slot.
You will see magic appears in front of you.
If you still suspect, you can ask anyone here. I can guanrantee everyone here will recommend you plug in to the nearest slot to the CPU. smile.gif

-pWs-
*
huhu really??? as ur same as mine... laugh.gif i nw plug to 3rd and 4rd slot~~ only able using stock vcore n vdimm get 2.6ghz~~ maybe later try using slot 1 n 2nd see the result ~ thumbup.gif
« Next Oldest · Overclockers United · Next Newest »
 

125 Pages « < 115 116 117 118 119 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0268sec    0.25    6 queries    GZIP Disabled
Time is now: 5th December 2025 - 12:03 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.