Should be ok bro.
I heard mobo picky of ram. But never heard AMD picky of ram
Btw, what ram you bro wan to get?

-pWs-

he wanna go for kingston hyperx ... ask me for advice .. since i'm not using AMD so i just make some research here and surveys for rams price .... maybe u got some suggestions for me?

This post has been edited by sang_karim: Aug 23 2007, 11:42 AM

Go for Crucial Ballistic or Crucial Ballistic Tracer.
You can buy it from bulk order or garage sales. Look for Shawty's thread.

-pWs-

yeah..oredi look at that and i have told him that rite now crucial rams r popular with micron chipset ... will suggest him with that rams .... what's popular mobo for AM2 ... my bro saying he wanna go for Abit mobo .. is it ok?

wow...cool~ But then on the other hand, it means that u totally don't understand the different between fsb and HTT at all. HTT is a replacement of fsb , no matter it is meaning for you or not . AMD already dumped fsb since k8 era. And i doubt that you can find the FSB that you refered on any AMD k8 mobo.

actually it is just small matter, but the reason i voice it out is because i don't want later on ppl get confused. There are alot of beginners here, hence we should use the correct term whenever we could.

This post has been edited by dblooi: Aug 23 2007, 12:37 PM

Abit not bad.
But better go for Biostar. Cheap and overclockable
My preference will still be DFI

-pWs-

if like that why don't u just explain them by details rather than presume me know nothing about it? weird...

so, it mean the ram speed have the limit ?? am i rite.. how much the limit for that?/

u have to find the limit of ur ram by overclocking it...
haha...

ok thnk bro.. i understand now.. thx for support :cheer:

new AM2 user registering in:

3800+ X2 Windsor F2 | Rainingzero | Asus M2N-E | Kingston KVR DDR-667 | stock AMD cooler l 2250Mhz

cheap2 setup only...

This post has been edited by rainingzero: Aug 23 2007, 08:14 PM

for Vdimm.. wut the safe voltage for corsair 1gb value select 667?
afraid of burn,,

This post has been edited by xixo_12: Aug 23 2007, 08:42 PM

me too new amd user

4000+ X2 brisbane | Asus M2N-E sli| advance module DDR2-667 |
i just wanto know the potential of this mobo and how to adjust the timing of this unknown ram. i search through the internet and can't find any of them. hope the users here with same mobo can give me some advices.

Welcome

For corsair 1GB VS 667, 2.1v Vdimm is the safe max voltage. Better with active cooling on it

The timing of your ram, you can view it from CPU-z under SPD tab

-pWs-

i just got biostar tforce 550..my proc is 3600 brisbane...my system cant boot at all...i suspect the BIOS issue..i think i must update the bios...is that true???? help me...

I think even the F3 windsor is still hotter than brisbane. I don't have any way to check it out though, unless I can have both processors, then I can check from the power consumption.

For DDR2, Crucial D9G** rams are best. For mobo, Abit gives a lot of features for the price, but most of their mobo got 'perangai' wan. Biostar has less features, but less perangai issue. DFI is the king for OCing, but be careful..the settings it allows can be extreme enough to make smoke come out..not for noobs.

Most probably.
Before that, try to use Windsor processor fix in the board see can boot or not.
If can, update BIOS using Windsor processor. After that, only fix back your Brisby 36

-pWs-

TQ very much...actually i am waiting for my frenz windsor proc to update the mobo bios..after that,i'll try to fix back my brisby...i hope it's working...

Good luck bro.
If still cannot, better RMA your board

-pWs-

new update:

3800+ X2 Windsor F2 | Rainingzero | Asus M2N-E | Kingston KVR DDR-667 | stock AMD cooler l 2400Mhz