Lower your ram divider and overclock more.
Brisby stock vcore can overclock around 2.7-2.8 GHz.

-pWs-

yeah, then from there onwards its hell. haha. need to raise a lot

wta some question:

if i oc using cap ayam psu, izzit dangerous for cpu, ram and mobo?
currently my cooler master real power psu died because wrongly sleeve it while the computer still on

Better get a pure power PSU to overclock.
Cap ayam PSU supplying non-consistent voltages which will damage your hardware.

-pWs-

This post has been edited by -pWs-: Aug 21 2007, 03:40 PM

Choice 1:
Vcore = 1.45 Vdimm = 2.20
Clock speed = 3025 MHz
Ram Timing: 4-4-4-12-15
Ram Speed: 432 MHz

Choice 2:
Vcore = 1.475 Vdimm=2.20
Clock speed = 2908 MHz
Ram Timing: 5-5-5-12-15
Ram Speed: 485 MHz

Which one will you guys choose? And state reason pls. Thanks

-pWs-

This post has been edited by -pWs-: Aug 21 2007, 03:48 PM

Choice 1 :
less vcore
more cpu speed
tight timing
sometimes.. less ram speed with tight timing better..

Thanks...Adjusted

-pWs-

ur ram cannot do 500? try 5-5-5-18-22 with 2.3v
if ok can raise 'choice 2' fsb..

friend.any new bribane 3600+ result?
2 bad i just quit x2 projec\t.
just move in e6750 4ghz air cool project.
still interest to know more about x2

This post has been edited by Vtec(Rock): Aug 21 2007, 06:54 PM

no much change.. all max stable depends on other option.. i just pick which can push highest..
mobo fsb : 345
not try for lower cpuMul would like to try 600 lol..

cpu : 3.1
so in everage 3ghz can do on just 1.45v after that need to pump to >1.5v

htt : 1500
my mobo can support.. eventhough not produce any significant boost..
no other chipset voltage change...

ram : 535
i think my ram can go further coz just supply it with 2.2v-2.3v
either cpu reach the limit or memory controller cannot handle them..

Can. But it need a lot of Vcore to handle it.
Feel like not worth.

-pWs-

try lower don't the vcore then.. sometimes just becoz the ram timing is not right..

Timing all tested already.
Make the MAL, Trfc and etc loose.
IMO, the reason that limits my Brsiby overclock should be 4 stick of my rams.

-pWs-

just want to make sure..which one is better interms of??

AM2 Athlon BE2300 or Brisby 3600+??

any info for getting better batch 3600+??

If i am not mistaken, Brisby 3600 nicer a bit than BE2300.
I saw it from one review, both processor are compared with stock clock speed.

Bro, go for F3 processor

-pWs-

for brisbane 3600+ try to get 0717 EAT or 0717 PAW, i will only suggest this steppings because it is recently made =) and of course ocing it as well, ask afosz on how his processer oc's , he has the 0717EAT

i wont suggest the BE versions because if u want to have the power saving feature, just download crystalcpuid and lower down the voltage for it and voila, u saved a few ringgits =)

how to check it's a F3?

You look for the box code. The code should be CZBOX.
That is Windsor F3.
BEST

-pWs-

This post has been edited by -pWs-: Aug 22 2007, 12:34 PM

CUBOX - F2 stepping
CZBOX - F3 steping
DDBOX - G1 stepping

F3 run cooler or not.. i don't like windsor coz very hot.. playing games for hour like sit beside car engine... brisby oc much cooler..