When i go do some sticker job on my B pillar at the door frame then i found the door visor double side tape feel off . After i stick it back then the annoying noise gone 💪😏

When you cruising on highway , the engine and exhaust wouldnt creat humming noise lol 😉

This post has been edited by Actchan: Jun 11 2018, 08:17 PM

does Inspira 2012 (With the updated rims and reverse cam) cost 41K otr?

i dont know if im getting con or not

Just done replace brake oil and steering oil.. rm240 feel being chopped rm100

Shop around.. difficult to say.
It's subjective


Maybe it's in pristine condition

understandable, but how do i confirm the milage?
70K milage seems abit low for the year.
People told to me to check the "service record". But i dont actually know what is this "Service Record". is this some bookelet in the car or something that i need to call a service centre to confirm?

Booklet..yes.
Check the date etc..

normally i asked price first only proceed with the job.

check the service record. see when is the date of last service and the current mileage when you see the car. mileage can be changed though...

Approaching 100km for my 2011 Inspira 2.0P CVT, i think a lot of component need to change, anyone have been to this workshop before?

https://www.facebook.com/csagarage/

Brake oil bleeding.. Normally 50
If u didn't bring brake oil.. They charge very Kau on brake oil.. Easily 40-50
Steering oil.. Workmanship max 30
Again if u no bring oil.. Easily 50
Confirmed chopped.

Brake oil.. Bosch Rm20 for 1L.. Good enough for 2-3 cars
Steering oil.. Good one rm50-60.

Workmanship I says 80 for both quite reasonable

actually i planned to flush brake oil only cost was quote rm75+, when i reach there and realize power steering about the time 2 so and quoted rm166+ , i though it was rm166+ for both at the end was rm 75+ rm166 = rm240+-

y service power steering expensive coz that sc added condition/treatment oil into it

noted

next round will be coolant and compressor oil

Anyone using R3 spring? If use the spring, will my front bumper kiss speed bump or shopping mall ramp?

What front bumper u using?

I'm using R3 bumper and Eibach spring, even though still got 2 or 3 fingers gap at fender (cuz Eibach spring doesn't lower the car that much), still need to go slow when taking on steeper ramp.

Back when I was on stock springs, certain ramp also need to go slow. So mainly because of R3 front skirting that cause it, not really due to ride height.

Currently using OEM bumper but thinking of using R3 bodykit later.

u mean R3 bumper or R3 front skirt? mine also R3 bodykit but still with stock spring.

yea could be one of the causes. read it somewhere in FB also. where you change the brake caliper pins?

R3 bodykit is fine. no prob going up/down ramps in shopping malls/condo

R3 bumper and R3 front skirt got difference? Basically its just the front skirt cuz don't think got any R3 bumper.

When with stock spring, i knocked the R3 front skirt at parking lot ramp slightly (nothing serious just can hear sound) cuz didn't slow down enough.

It's R3 skirt right. There is no R3 bumper for Inspira.

Ok now I'm 50-50 whether to get R3 springs or not haha

BTW, nice to see got members here using R3 bodykit instead of Lancer / Evo one.

bumper is the whole thing. skirt is just the add-on to the bumper with the front skirt, certain ramp will kena, those ramp with badly done slopes.

most of my friends using evo/fq. i guess R3 springs will be fine. do let me know if u manage to find it.

i found one LYN member selling, he quoted me RM900.

BTW, anyone using new proton 3D emblem? What size fit for front & rear Inspira?