Hi Gocitygo,
How much is Roxul MPS400 (density 80kg/m3).

nice ROOM ....

gicitygo, very very nice room, mind to post more picture for your HT room?

my simple DIY

Nice. Ur ceiling is high. Looks spacious.

Nice and clean setup kiatsing.

Very nice room. I suggest you mount your screen a little bit in front on the beam then do a velvet curtain at the back just under the beam. I understand WAF so my previous HT room I do this. When I want to watch movie, I pull the velvet curtain to darken the room. Again the top portion of your pull down screen it's best you mask it. Cheap way is to use black masking tape. If not, find those velvet masking tape from the net.

why need masking tape... if watching in a total pitch dark room?? make any difference??

btw..wat is velvet masking tape

even ur room is total dark, when the projector switch on, there will be alot reflected light from the projected lmage on your screen to your surrounding, this will make your dark is not dark enough unless your surround is in matte black and only ur screen area remain white or light gray.

The mask is to hide the letterbox bars on the screen. This will increase the apparent contrast of the image.

In a pitch dark room you will notice the letterbox bars (perhaps even more so). And even the best projectors won't project a totally black bar, so to really eliminate the bars you need the mask and velvet is probably the best material for it.

movie's letter box size different at different movie, the velvet mask can be mask according to each movie?means adjustable?

If you want adjustable bolder, then need to custom pull down curtain for masking. Cause movie come in 4 main aspect ratio.

ok got ...after u sum sort mask/tape ur kain...

ur dinding also white ma .... wat is the difference?

tat's y i have mask/tape any yet to mine

to me.... the nice fix frame is very nice n possy look i wanto make 1 after i move to my new pad

tape n mask this kind of flexi up n down pull down or pull screen....

i dont see a need....

Just came back from Homedec Penang. Saw some acoustic foam which is quite cheap. RM70 per pack with 4 pcs of 60x60 cm foam. See website below : http://www.m-pe.com/En_02_products_M_Sorb.html

I own a Htsf2300 and I want to ask you guys something..the surround speakers wire are too short so are there any ways for me to extend the wire myself?..can I use normal speaker wires?

ah..... this thread reminds to take my updated HT photo

ameeyn, can use. The terminal / binding post is those normal type, right?

Make sure you grab those that are thick enough..

40 mm thick. Good enough or not?

Well, to me, I prefer 2 to 4 inches.

mind sharing who the KL agent is?