My guide my how to flash firmware on Huawei E5186. Haven't got the time to create the image guide as I don't have a Windows machine with me currently. So you have to refer to my text instruction.
1. Configure the IP of your computer to 192.168.8.100 and the router IP to 192.168.8.1 at your LAN properties. Leave the Subnet Mask at 255.255.255.0
2. Connect your computer to LAN 1 of E5186.
3. Run Multicast Upgrade Tool. Set the Network Card to your Ethernet interface. Tick force upgrade and select your desired firmware.
4. Put E5186 into flashing mode. With the device off, hold the Wi-Fi and WPS button at the right side of the device. Turn on the the device while holding the Wi-Fi and WPS button. Release the Wi-Fi button immediately when you see the Wi-Fi LED flashes. Release the WPS 1 second after you release the Wi-Fi button.
5. Click Start on Multicast Upgrade Tool. It should start sending firmware to the E5186. If it doesn’t, start all over again. Getting into the firmware update mode is tricky.
6. Wait for at least 7 passes. Notice that the counter at the package file send time.
7. Stop Multicast Upgrade Tool and reboot your router.
8. Remember to set your IP back to auto and operate your router normally.
9. Your device should be updated, check the firmware version and webUI version.
No warranty provided and you may brick your device.
Get the tools you need here https://mega.nz/#F!wvo3AAQL!DFTXF84VZCJ6CzuXbBD4Zg
Here's the firmwares I tested
21.310.01.04.418
lmt branded. Best firmware as it is able to display the most amount of information at the interface. You can see the selected band and the CA status.
21.310.01.01.182
Telia branded. My second favourite firmware as it is able to select the band from the webUI itself without the need of a tool.
Most of the firmwares have a telco branded UI and it doesn't matter. It will not lock your device.
fruitie uhlaw
Jul 3 2017, 09:16 PM
Quote





0.0308sec
1.37
6 queries
GZIP Disabled