try use DNS Jumper V2

What about openwrt? I'm sure there will be support for the c5 eventually from one of them.

I am able to recieve 47++ mbps for download on 5ghz. But on 2.4ghz, the max speed i able receive is only around 42mbps. Both speed test were done next to the router. No issue on upload speed. So, It that normal? or is there any setting that I could made? Thanks.

That's how suppose to be. 2.4GHz had too much interference so performance is not as good as less congested 5GHz.

In ideal situations, 2.4Ghz should be able to match 5Ghz at 50mbps. But I think that's pretty good already.

This is the best i get on an iPhone 6s (2.4Ghz N, 20Mhz, 2 Streams & Short Guard Interval) and UniFi 100mbps. Router is a RGX4400.


More details here: https://forum.lowyat.net/index.php?showtopi...post&p=84140011

This post has been edited by soonwai: Apr 2 2017, 01:44 AM

Anyway, my problem is Twitch still acting like an ass with IPV6 and it wont play any video without loading every few seconds while Youtube works fine with 3 tabs of 4k video . Help?

This post has been edited by nikaizad: Apr 1 2017, 11:09 PM

Unifi cheapest plan now rm199.


Attached thumbnail(s)

Ya...for handphone max speed for 2.4ghz can reach 80++Mbps. But my 2 streams usb wifi dongle 2.4ghz can get full 94Mbps(club94).

Test with 2 streams usb wifi dongle

That's fast. Which USB dongle is that? And connecting to what wifi router? Is that at 20 or 40Mhz channel width?

Twitch loads in IPv4 and not IPv6 for me. No buffering problems @ 1080p60 - Source.
How did you get it to load in IPv6?

when i set IPv6 in my router i cant access twitch, not that im loading twitch using IPv6.

i have to set my router to IPv4 only

Anyone knows how to sync hypptv remote control, so that it can control the tv set also?

Now have to use two remotes; 1 to switch on/off tv, 1 to switch hypptv channels

I have IPv6 enabled in my router.

Astro wifi dongle, connect to Archer C2600, 40Mhz channel width for 2.4Ghz band.

It's not 2 streams, it's a 3 streams 3x3 MIMO wifi N dongle.


https://fccid.io/document.php?id=1639911

This post has been edited by calvinlaw510: Apr 2 2017, 02:59 AM

Let's say you want to program the blue TV Power button on the HyppTV remote. Press the blue button on the HyppTV remote until the LED starts flashing. Point your TV remote at the HyppTV remote and then press the Power button on your TV remote repeatedly until the LED on the HyppTV remote stops flashing. Now you can power off/on the TV using the blue button. I had to try a few times before it worked.

Genius; thanks!

Hi, going for a long shot but is anyone's Unifi down? All LEDs on Modem blinking non-stop. I'm staying in JB city area

Thanks for the info sharing!
Im using asus rt n66u

Could be a power supply problem. Got another PSU to try?

mind sharing what router you're using???


mine is the stock silver UniFi one