We can't see what you are seeing...how not sharp is it? We have no reference to your sharp vs not sharp. You sure is the box?...can be bad source, bad box, bad cable, bad tv...

Other than select 720p or 1080p...there is not much more you can do. You can try MX, VLC, etc., see if that helps...and adjust TV settings etc.

Comparing my Q16 and Vensmile, Vensmile is not as sharp...but it's also not soft and fuzzy type of unsharp...

The S905 is fast enough...you may need to redo your Kodi install or reset the box...could also be wifi/ethernet problem...or bad ram/rom...

This post has been edited by dwRK: Jul 4 2017, 06:29 PM

No. Most people don't notice the 3:2 pull-down, don't know what it is, don't know what to look for. It's not stuttering like you are describing...

I assume you have tried playing local videos without problems? Then it's not a refresh rate problem. If it's only Kodi, hard reset the box and try again...update the firmware if required, to official or 3rd party...

...and turn off Kodi hardware accelation...this maybe your main problem...and try SPMC, FTMC, etc...

Which M9S pro did you get? 2/16Gb, 1/8GB? It's reputation is having fake memory... fruitie's 3/32Gb unit is working fine though

I understand there is OEM support...just that the latest firmware is problematic...

The Beelink is great for people trying out different 3rd party firmwares...

This post has been edited by dwRK: Jul 5 2017, 12:31 PM

People use different apk to check... gets different results... lol... no idea what is happening... Personally I suspect is firmware problem but you never know unless open up and check the chip...

As long as working fine...

This post has been edited by dwRK: Jul 5 2017, 12:35 PM

Different methods...same objective.

TVB...kodi thread post 2. China IPTV addon none AFAIK.

May need vpn.

My Himedia I use SPMC... Jarvis trips randomly...

My Vensmile I use Krypton... rock solid no issue...

So far the "next generation" of boxes using cheap SoC ie RK3399, has been terrible...a lot of codec n compatibility problems...

This post has been edited by dwRK: Jul 7 2017, 07:00 PM

Only if you use subtitles

You can also just watch now...no need to download iirc...

This post has been edited by dwRK: Jul 8 2017, 09:25 AM

I guess you won the lottery... now just checking if you need to share? Hahaha...

OK... Vensmile won't let it run because it tries to take over as launcher... my box is very territorial... lol...

This post has been edited by dwRK: Jul 8 2017, 08:51 PM

...I would have weave in "Android Box" somewhere to give the post some legitimacy... lol...

Rip(copy) the app from old box to new... and follow the various threads discussing apks...

See the Kodi thread...

Quote from latest CNXSoft review...


"Kodi 17.3 from the Google Play Store will not work well on anything below Android 7.1 for Rockchip device, as my experience with Vorke Z3 has shown. So I would not purchase as a Kodi box, at least if you plan on using the latest version. I previously reviewed two Rockchip RK3229 with MXQ 4K and Zidoo X1 II. I abandoned the review for the former since the firmware was unusable, but Zidoo X1 II worked fairly well for H.265 and H.264 videos and audio pass-through.

Talking about cheap devices, sometimes I sell samples locally after reviews, and I’ve got several reports with cheap models (around $30) that they work fine… for about 2 or 3 months, and then just die, and people come back for a better and more expensive model."

The installer is right...but it's not really called "channel"... the HyppTV box uses Lan port 4 configured to "vlan 600" ... internet uses vlan 500 for Lan port 1-3

Very easy...Keep the modem upstairs...move the router downstairs and you can have it for cctv, HyppTV, other android box, etc. The modem and router doesn't have to be side by side.

If you want to keep HyppTV upstairs and new android box downstairs...then keep the router upstairs and see if the android box can be connected using wifi... if cannot, you will need another router downstairs... in networking, the router performs the "splitting"...

This post has been edited by dwRK: Jul 12 2017, 11:02 PM

Ouch...big problem...

Easiest will be to use powerline adapter connect to Lan 4 and HyppTV box, otherwise you need to bring the cable modem & router downstairs and a new router upstairs...

Yes.

Networking is not like say power wiring...cannot just split 1 wire to 2 wire/connection.

To "split" you need a network switch...but I recommend a cheap wifi router...so upstairs Unifi router connect to new downstairs router and then you can connect cctv & Q10pro to it...

I think Q10pro should be able to connect wirelessly to upstairs router 1 floor up...try it first...

This post has been edited by dwRK: Jul 13 2017, 05:52 AM

Just use switch downstairs

I suggest y'all continue in Network thread or PM...2-3 OT is fine...this could drag on...

Glad is working fine now ...pg 1 somewhere mentioned some apps must use mouse...

It is too long and wordy...lol... nowadays no energy to edit...

Yup...

Really too bad...my box runs flawlessly...

Which comment to pin?

For sure...but what info is missing, or not understood? My England can be difficulty at times...

I've already mentioned Minix has the best tv apps compatibility...and also showing for example aotg...which box works...

Glad to pin and give you credit...my ego can deflate a little no problem...