Hi, quick question to Bezza owners here,
anyone came from Myvi 1.3? or having both cars?



comparing Bezza 1.3 & Myvi 1.3
based on paper spec,

BEZZA 1.3
Max. output (DIN) kW[PS]/rpm 70/6000
Max. torque (DIN) Nm[kg.m]/rpm 121/4000

MYVI 1.3
Max. output kW/rpm / 67/6000
Maxtorque Nm/rpm / 117/4400

Does that mean Bezza is better in terms of acceleration and power than MYVI 1.3?

Thanks in advance for any feedback, thanks.

To those who wonder how it looks like beneath your carpet

why the loud tire & road noise





strip ready for soundproofing job

Nice thanks for sharing. Just curious, if do a full sound proofing, roughly how much weight does it add to the car?

I owned old 2008 Myvi before i trade in for Bezza Advance.
Over-taking a car, Myvi way way way better than Bezza. so Myvi acceleration is mile ahead of Bezza.
Comfort, Myvi far better with wider seat and leg room.

Why i change Myvi to Bezza.
Of coz car was old and the old Myvi safety was terrible, the worse milo tin rating.
if Myvi front impact, not just the A pillar will bend, the whole engine will push into passenger cabin.
that why you barely see any Myvi driver survive front impact.

I choose Bezza for better safety and VSA is a must for me to buy a car.
i don't go for Persona as i still not have confident on the engine reliability.

bezza throttle is tuned for fuel saving so can't complain about it, and the max torque rpm (4400rpm if not mistaken?) is later than myvi's 3200rpm. So you will feel the low end torque is lesser.
i bet bezza wont be a world apart better than myvi when it come to crash / impact though, even it so called scored 5 star.

and for proton campro engine, the reliability is always a question since day one.

Right, not expecting it metal will be hard enough to escape injury, but the VSA will good enough for me to prevent an accident in first place.

-delete-

This post has been edited by y4ng: Nov 4 2017, 06:53 PM

Yup...can't expect much for a Malaysian build body. We still far behind compare to others car producer. But it does the job. I still remember several years ago when a lorry hit my father's 1975 mitsubishi galant. My father car just got a small dent but the 2 tonne lorry where knock over to the side. . Suddenly so many chinese come and take my father car plat number for luck in gambling. LOL. That thing is build like a tank.

Anyone noticed a very soft plastic-plastic rattling sound on dashboard? Is not that noticeable but it's there..any solution?

what is the service cost for each time service? i cant check on perodua website

How much for the sound proofing job?
Any recommendation in JB?

It got few sound here & there.
But hey even my Civic have sound. Next service need to check for the noisy compressor or turbo? No idea but the engine noise was louder than it 1.8 sibling.

Add me Silver 1.3 Advance.

Yeah not every car is perfect but I just want to get rid of it if possible😂

I already emptied everything and drive around again and the sound is still there..tell me if sc fixed it for you is it hard to change gear from P? I saw someone post about this problem somewhere else

Hum... mine seem ok, by the way my foot always on brake pedal when i shift from D to P and only let go the brake after i pull the handbrake.
Not sure what is you practice?

Check out previous post..someone posted it here together with the item, price and total cost

Well here you go..the difference probably the battery and alternator cost because it's different with 1.0 and premium x
https://forum.lowyat.net/index.php?act=Atta...post&id=8592200

This post has been edited by CapyBara96: Mar 28 2017, 11:44 AM

-delete-

This post has been edited by y4ng: Nov 4 2017, 06:54 PM

I had a similar sound which only came out when u go over bumpy surfaces. It comes and goes during the first few weeks. After that I don't hear it anymore.