...

This post has been edited by y4ng: Nov 4 2017, 06:35 PM

-delete-

This post has been edited by y4ng: Nov 4 2017, 06:35 PM

-delete-

This post has been edited by y4ng: Nov 4 2017, 06:35 PM

Please add me to the list

Advance 1.3, glitering sliver,penang

I think should add one more section for sound prove.

-delete-

This post has been edited by y4ng: Nov 4 2017, 06:36 PM

First time seeing a Bezza with faulty brake lights, the LED's on the left side is not illuminating at full brightness, owners pls occasionally check your tail lights...

-delete-

This post has been edited by y4ng: Nov 4 2017, 06:36 PM

Wow awesome to have V2. Thank you very much. Hope to share and learn more here. Please add me to the owners list: Bezza Advance Sugar Brown KL

This post has been edited by ethangool: Feb 5 2017, 10:00 AM

checkin in

-delete-

This post has been edited by y4ng: Nov 4 2017, 06:36 PM

u so rajin make table total auto, manual, premium , advance etc. hari2 use excel ke.

-delete-

This post has been edited by y4ng: Nov 4 2017, 06:36 PM

Hehe I'm not an owner (yet) but waiting for bezza v2 where they iron out the most prominent flaws in the first batch

Hi i'm new here

i would like to find out for the manual is it using clutch cable or hydraulic?

And notice got 1 member driving an manual if possible can take a photo of the engine compartment with the transmission portion of clutch slave pump and also the clutch master pump area.

tks in advance..

-delete-

This post has been edited by y4ng: Nov 4 2017, 06:37 PM

Hey guys for advance version, how does it hill assist kick in ??! Bcs when I go to malls with those multi stories car park if there is a jam going up I notice my car does slip back if I don't press the brakes.

Isn't with hill assist the car should not be slipping back???

Bezza no hill assist...

Bezza Advance does have Hill Start Assist.

So far it works fine for me on slight slopes. But i notice that i have to come to a complete stop first before it kicks in... But yet to try on very steep slope (that kind like multistory car park steep) but when i do ill let you know if it works.

The Hill Start Assist is turn on by default. So far tested on multi story car park no issue. You have to fully break/stop your car then when release the break it won't slip backwards. However remember Hill Start Assist is not to be use as break, as soon as you release the break try to step on the gas as soon as you can. If you need to hold the car for a longer position, fully press the break.





This post has been edited by hddexpreso: Feb 6 2017, 03:08 PM