its really small. so the shop say not cover. coz its handmade not machine. and the buble is due to dust inside. its not visible but i still can notice it coz im abit particular with my car.

Dust and Bubble is their fault
How much you tint it ?

This post has been edited by shaguarbb: Jun 21 2012, 11:11 AM

How is cool world tinting nowadays?

was planning to do this..

Cool World Premier Series
Colour Neutral Green/Black
VLT 65%
VLR 22%
UVR 99%
IRR 82%

any remarks?

---

Added on June 21, 2012, 2:44 pmis the heat cut reasonable ?

This post has been edited by carbonfibre: Jun 21 2012, 02:44 PM

Depends on ur budget bro....
If ur budget more than RM1k can go for Higher quality film...

You can go to Puspakom to check. They have the equipment. No saman. Not sure about the fees though, but probably quite cheap.

If its a small glass then they should even replace it for you, cos the chances of dust getting trapped inside is less considering the area is smaller than say, front windscreen..

Wingard royale
VLT 60%
IRR 90%
Solar energy rejection 60%

Price rm1600 from Honda dealer for Honda insight.

Issit reasonable or expensive? Need advice.

RM1.6k u can go for Higher Quality film like 3M/V-kool/Huper Optik

Huh... branded even more expensive...

I was lookign around for 6mil security tint... and Llumar quoted me 1380-1980 for 4 windows only..

What's ur cal model ?
Erm.... Llumar is good for security but not heat rejection bro.

Yup, tomolo, wil go tint for Fujicool ! ^^

will feedback here soon

---

Added on June 24, 2012, 1:09 pmFujicool~~ Here i come !!!

need to remove old tint b4 tint a new one, hope their skill is good !



This post has been edited by dadidi: Jun 24 2012, 01:10 PM

Need to install tinting for Peugeot 308 CC front and rear windscreen, not sure if security tint is needed, any recomendation?

any idea how many range does Llumar has?

Front and Rear Windscreen not recommended to tint security film bro...
Security is just recommended for Side windows

Below is Global Llumar Real Spec.
1. SA50CSRPS4 = T4-50 (VLT=52,TSER=29) <-- for Side Security 4mil
2. AIR65GNSRPS6 = Diamond6 (VLT=63,TSER=43) <-- for Side Security 6mil
3. Air80BLSRHPR = AirBlue (VLT=78,TSER=43) <-- for Front Windscreen
http://www.llumar.com/pdf/en/LLumarAutoSpecsGlobal.pdf

This post has been edited by shaguarbb: Jun 25 2012, 08:26 AM

hi guys, i am looking for a suitable tinting for the windscreen of my car (swift). could someone recommend me something as I use the car mainly to drive to work and back daily (approx 25-30 km perway) and I tend to leave it in open carparks constantly. thanks !

any1 knw the TSER for agard 595b?

Same bro, it's depend on ur budget. If got budget then go for higher quality film, u pay what u get
3M, V-kool, Huper Optik

Spec for Agard/Aircool always change bro, that's why they don't put their spec at their Official website
Agard = Aircool

i am staying at PJ17, anyone has any idea on which shop offer reasonable price for the tint?

Just installed Vkool Elite on my Forte. Not very satisfy due to poor workmanship. Go back to the shop and they said is watermark n will disappear after few days. But i can see bubbles n some dust between the film, just wait few more days and see how. And my GPS cant use after i installed Vkool,kinda sad bout this. So for those who want to install Vkool Elite better think properly, make sure your GPS won have any problem with it.

How about Raytech?