U stick that camera in the middle using glue ? I search redbat rb-322 is not reverse camera specific to honda city fitting. How is the left - right alignment ?  Is it slightly towards one side even  u follow the parking guidelines exactly ?
Redbat rb-282 is fit to honda city, and it fits on the car plate light there, but however i am not sure the left-right alignment though.

Btw, i do not see the screen go off when i turn the steering to 1 side max during reverse. I am using cap ayam reverse camer.

Could that due to your camera ?

CFL users, I think Honda has removed the ultrasonic alarm sensor in our cars. When checking my fren pre-FL, theres a panel different than my car. When I looked his manual, this part is the ultrasonic sensor. This seems to be missing from FL.

Hi, anyone here using redbat reverse camera with original pre FL HU? Anyone face issue where the screen will go black/blank when steering turn till max?

Sunshade
www.lazada.com.my/custom-fit-oem-sunshades-sun-shades-for-honda-city-2014-20164pcs-15480542.html

It is normal. SC has confirmed it during my 1st service last week. There should be a problem when it's turns red. They advised to spend about 4-5 mins to warm up the engine every morning

The camera screw into the space next to the button to release the boot. RB-282 will cover the light tat shine towards the number plate therefore the seller ask me to get rb-322 instead. Not sure, will bring the camera back to check nextweek.

Walao 4-5 mins warmup! Our car not supercar or turbo wei! No need warmup b4 start driving, just dont go above 3000rpm within 5 mins is good enough, IMHO.

No need 4 - 5 mins so long, just start let it idle for 45 sec - 1 min is enough then you can drive out dah

It's funny reading the comments here. Seems like most of you are very new to owning a car/first timer, hence the funny complaints listed here. Lol

Though there are still few genuinely useful tips and tricks.

2014 April HONDA CITY S+
Sharing some of my mods from 2014~till now....
Engine:
===========================
PIVOT THROTTLE CONTROLLER 3 DRIVE X

K&N DROP IN FILTER

PIVOT MEGARAIZIN WITH GROUNDING CABLE

FORGED RACING RADIATOR HOSES..

WORKS ENGINEERING OIL FILTER

Cap ayam rear muffler ....

Suspension:
============================
ULTRA RACING FRONT STURT BAR

ULTRA RACING REAR ANTIROLL BAR

ULTRA RACING REAR LOWER BAR

EIBACH SPORT SPRING

STIFF RINGS

ORSEN BUFFER

Wheel & Tire:
=============================
Advanti Storm S3 (N759)
7J X 15" OFFSET 35 4X100
MATT GUN METAL COLOR （4.7kg）

TPI FN NUT- COLD FORGED ALUMINIUM 7075(with lock nut)

Michelin ps3 195 55 r15

Brake：
==============================
WINMAX ARMA STREET AT1 BRAKE PAD

Pro-RS SAFEBRAKE TEFLON BRAKE HOSE Steel Braided

PROJECT MU DISC ROTOR

Exterior:
=============================
Modulo bodykit set.

Lubricants:
==============================
MOTUL INUGEL OPTIMAL COOLANT

MOTUL DOT 4 BRAKE FLUID

TORCO SR-1 5W30

Gauges & Others:
==============================
WORKS ENGINEERING OIL TEMP METER

WORKS ENGINEERING OIL PRESSURE METER

ORSEN SHIELD

WORKS ENGINEERING OIL CAP

WORKS ENGINEERING RESERVOIR TANK COVER

Sunshade
www.lazada.com.my/custom-fit-oem-sunshades-sun-shades-for-honda-city-2014-20164pcs-15480542.html

that one is to reset the alarm... btw if FL has removed it, then how do disable the alarm?

MR DIY got sell for RM50. Wow lazada selling abit pricier.

FL HU is a huge disappointment, even FL Jazz also using this crappy HU, guess other model will be the same when have FL.

According to my fren pre-FL manual, thats the ultrasonic sensor (the small light blinks when alarm activates).

Cost cutting HU. What to do? At least it uses standard double DIN slot, so can still replace with aftermarket HU.
But if I can find some way to mirrorlink with it, then all faults are forgiven.

FL HU can't do mirrorlink?