putting nirox pumps in series, u will get almost same power as the D5, and yet save lotsa $$$, but i experienced clicking sound after some period of 24/7 usage for my nirox, tht's y i switched to a 2nd hand d4 pump bought 2 years ago from my twin nirox setup...

oo...

btw, the clicking sound is from the impeller not catching on properly, unplug and replug 2 or 3 times to have it silent again.

and using dual pump is insurance against 1 pump dying LOL

when I hear the pump making noise and I will spank it a few times and it will become silent... LOL..

Agree.Clicking sound went when you replug the power connector

LOL... missed my dual nirox setup... but quite statisfied with my current D4, bought it 2nd hand from a forumer here... only a bit noisy and less powerful then D5

Oh... sori late reply... i will try 2 ask bro metalzone. Since using dis cheap y spiltter like shit n not safe... I think its 4 gardening hose use only... Thanks yall...

u try find at ace hardware, looks quite strong but nvr use it b4... better buy those better one...

lol.... your warranty is hereby voided =_=
physical damage mar =_=
LOL!!!

just unplug and replug, i suspect is the impeller not catching the magnetic field or whatever properly :S



lol, but hows the performance of dual nirox compared to ur current pump?

spanking ur pump haha............ good idea hehe.......

dual pump setup should give u more head, btw lichyetan, u put the pump in series 1 after another or u moved the 2nd pump after a rad or block ?

@bryanyeo87
i'm looking for rad laa.... when ur stock coming in?

using apogee gt, bip II, laing mcp350 to watercool my 8400 wolfie n mcw-60 for 96gt. 96gt temp is nice... idle 34...load 38. the 8400.... idle 38 load 63. it might be the rad.... when priming..... it so hot.rad body is like 45c-50c.duhhhh

what rad u want

i can special order in, but takes a few working days la, got the fresh factory smell summore XD (assuming kastam doesnt block the shipment thinking its car radiators hahahaha) let me know what rad you want

aiya, confirm ur rad ade, coz BIP2 is not designed for double blocks mar :S

and what fan you use to cool it wor?

and also, the wolfies/yorkfields are known to have temp inaccuracy

Get a PA120.2 Maybe get a more powerful fan My temp on MCR220 with only Fuzion V2 and E8400(4ghz,1.34v real before droop) is good.48 C idle 61 C load,only 13 t Delta. Anyway,Wolfdale temp is not trustable but your t delta is like air cool

dats bcos i enable C1E + rmclock. idle temp drop to 38 @ 1.28v. n y my apoogee gt only 2c better than ur fuzion? i tot it should be more than dat since i oso wc my 96gt n rad is bip II? really confusing leh. PA 120.2 .... hmmm..... i better get BIX gen II leh. bryaneo... can get me BIX gen II ah?

I think hav 2 change all lor.... Bcuz my gas tubing very keras n hard 2 bend.... so maybe dats da problem kot...

my temp idle 39-42c load 55-60c depends on ambient for my 4ghz e8400 setup and 3870, now running 3.96ghz @1.30v@38-40c idle, 52-55c load( depends on ambient again ) as 4ghz need much more voltage, around 1.375 in bios. my dual mcr-220qp in parallel setup looks nice... priming + 3dmark06 = 1c increase over load temp for cpu and 1c increase for gpu, gpu idle at 36-40c also depends on ambient, load 39-42c depends on ambient....

one thing i noticed from single to dual rad is no more condensation @ internal of reservoir, when running single mcr-220qp, i notice when 3dmark06 + priming there are condensation occur inside the reservoir wall as internal of reservoir are hotter then outside, after switching back to single loop dual rad in parallel setup, no more condensation occur, means internal of reservoir are almost same as outside, mayb the high temp is the limit of my waterblock and also weaker D4 pump...

@satanhead2003,
no nid PA120.3 or any expensive radiator, buy another similar radiator and run it on parallel setup, in series also can but not as good as parallel as some other forum mentioned, u can go google around...

This post has been edited by lichyetan: Jul 8 2008, 12:36 AM

can... but i recommend using a separate loop, it will perform better, and its cheaper
if you still insist on replacing the rad your using now with another rad, i would strongly suggest PA120.2, but they dont come cheap

BIX gen 2 ar, i can get it if you want



mmmm get masterkleer tubing la, rm 6 per feet only, and its quite thick walled. or you can use the tubing i am using in my setup, damn flexible and hard to kink, but problem is, i forgot where whats the name of it



or maybe get another rad and separate the loop?

dunno wether my mcp350 can push it or not in dual rad setup as for now im depending on the hmax n not fmax.btw, how u setup ur rads?

pump->block->rad1->rad2->
or
pump->rad1->block->rad2->

my setup is pump, y-splitter->radiator 1 & 2 share the same flowrate, y-splitter join both back together, CPU block, GPU block, reservoir... wat i notice is no more condensation occurs inside the wall of my reservoir... and also the temp are lower when priming + 3dmark06

You can try to build another small loop also.MCW60(Or Fuzion V2 GFX) + MCR120 + Mid Speed Yate + T line + Nirox pump.Might work well.

pics of different setup of my wc from 2006 till now...

AMD Setup

dual loop blitz formula SE + 8800gt setup... Blitz RIP d...

Dual Loop, E8400 + 3870 in Different loop...

current setup, inverted ATX, single loop dual MCR-220QP in parrallel


sry for large pics as forgot to resize... open spoiler to refer...

This post has been edited by lichyetan: Jul 9 2008, 05:51 PM