http://csd.dficlub.org/forum/showthread.php?t=1068

not bad eh...

any lan party edition will be out? i like bigger mobo.

There is.

It's DFI Lanparty 680I.

sorry a lil noob on intel chip set. so the nvidia 680 is equivalent to intel 965? looks delicious! hahaha...it would cost a bomb! seeing the infinity dark already that much.

AFAIk, the Nvidia N680I chipset is a lil "bit" better than the Intel 965 chipset, but then, the Lanparty N680I will surely cost a bomb.

It's a Lanparty board dude, normal lo...

Anyway, for the infinity, check my signature.

this mobo with incoming r6x0, my dream rig will come true so soon...

btw, i can't find any link or review bout dfi lanparty 680i, did this mobo exist?

DFI LANPARTY UT NF680i LT SLI-T2R

Official Website:
http://us.dfi.com.tw/Product/xx_product_sp...ID=5277&SITE=US

Pictah:

does P965 fully support Yorkfield and Wolfdale cpu?

Now?
Not yet, but we'll wait for the next bios update.

Wei skylinestar, u've been asking all this and that about this motherboard, don't want to join in my bulk ka?

i think i'll just hold and wait first, since P35 mobo will be released on Q2.
but if i strike jackpot, i'll buy the infinity P965 now.

I don't think P35 with DDR3 will arrive that soon. Give and take, Q3 is the earliest. DDR2 is still going strong. It might be be P35 with DDR2. Nah, new chipies, DDR2 the lifespan will be very short.

that's a funky looking heatsink for nb

btw, wat psu would be sufficient for this mobo?? i'm thinking of still using my old Sansun modular PSU. but when i checked the power requirement when OC it would need at least 600W psu

hey got one question, comparing this mobo to asus P5N32-E SLI nvidia 680i motherboard, which is better?

i'm stuck between this two choices.

almost all P35 mobo showed in CeBit support both ddr2 and ddr3, and P35 will in market in Q2 in end of MAy or begin of June, X38 in Q3.

asking few members who doing bulk, most of them say just got few available, new chipset mobo coming around.



u mean DFI LANPARTY UT NF680i LT SLI-T2R vs ASUS P5N32-E SLI?

DFI:
680i LT SLI Chipset (better o/c)
Warranty : Not sure
Price RM1200++
Nice layout


ASUS:
680i SLI Chipset
Warranty: 3 years
Price round RM850+-




This post has been edited by arjuna_mfna: Apr 12 2007, 11:12 AM

600W just for mobo?

not just the mobo la, it for everythings... incluging gfx card, hdd and so on...

Yeah the boards are maybe in the roll, but the modules itself are still very primitive. The latency is high, the dies volume are very limited, the price won't be competitive if its roll out in Q3. Words has it DDR 3 will be delay, to give room for DDR 2 with 1333mhz boost. P35 with DDR2 may live longer than I would expected.

when all the forthcoming DFI owner will show their oc results here?..

cant wait for it....i like to be the guinea pig also,but....got no extra money..hehe

just got mine just now..will post result later..wakakak

---

Added on April 12, 2007, 5:03 pmfirst view
1)the nb is not hot is not true to me..pretty hot with noctua running passively..around 42c
2)no holes for nb chipset,only can use clip type
3)have a hard time to reach 500fsb at first few boot..but now its ok..probably is my temperature
4)can fit hr05-sli with tuniq but hr05's clip is not tat tight

need to figure out how to select boot device menu b4 boot from hdd now,but afterall still a good board..

below is my first boot pic but now in my case and watercooled edi



This post has been edited by coolice: Apr 12 2007, 05:03 PM

i mean DFI 965P-S compared to Asus P5N32-E SLI