Wah everything is so shinny, uncle you polished all the head pipes, case and hardwares... look so shine.....

btw u really have a pair of magic hands to able to mount the cooler in those loop of heat pipes..

he can mount the IFX 14 in there too, this 1 should not be a problem for him hehe........

btw any news artic cooling extreme series of hSF will be launch ??

PS uncle , ur king kong not yet bling bling already ?

edited: corrected for great justice ........

This post has been edited by LExus65: Oct 7 2007, 03:20 PM

Corrected for greater justice...

The Arctic Cooling Freezer7 Pro sit's exactly within the heatpipes of the mobo. Exactly as in really exactly. The fins are actually touching but by the slightest bit oni. N no i dont polish the pipes. I may haf heatpipe fever but not to the extent of polishing the pipes. Mebe the next time I remove everything for Thermal paste reapplication I may do it with sum Autosol. The reason it's shining in the pix was coz it was all brand new from the box so still shining. It's already looking like dark brown now.







I've been told the Extreme is due in November. Hope it's launched on time as lotsa ppl haf been waiting impatiently for it.

N no the King Kong not enuf bling bling yet. I havent taken pics of it at night with the Striker Extreme LEDs shining in the dark. It's so cool, u can set in BIOS to keep the lights on while the rig is on n also after u shut down. N there's a few more bling bling mods coming. I jsut need time. I wish I was like the Astro guy keep saying I got timeeeeeeeee. I got timeeeeeeee, I got timeeeeeeee. LOLZ!

This post has been edited by ianho: Oct 7 2007, 10:14 PM

It almost looks like the pipes are polished ... probably u could polish it for superb bling bling shine looks....

copper is hard to polish till shining, especially those fins haha........i

wah in november, very soon............ looking forward for the new artic cooling HSF.........

haha ic the mobo LED are indeed very nice............ just like my old problematic Fatality.......a nice red LED show case, but cannot off or bling problem a bit..........looking forward for uncle's bling bling factor.......

It's actually pretty easy. I'll show u guys a pic of the heatpipes removed once I sort out my pics. U can remove the whole thing n just lay it in a pan of Coke. Leave it there say overnight. Shud b nice n shiny the next morning.

hahahh I did that before on my Vantec BGA ram sink, it works but still not as shine like a brand new one. ..

Hmmm Artic Freezer .... really like it but just wonder how good is it .

Is it possible there's a review before product released ... I bet by now time would have the cooler finished development and ready for mass production.

So would out dearest uncle get hold on one to drool us before the official releases....

uncle,
this time team never send you any 1337 ram for your C2Q setup??

uncle ianho,

noob ques..

wont the 3rd graphic effect ur 8800 hotter??

then will effect the overall performance??

If u leave it in the coke long enuf it will get shinier. Well, I can only hope I get the Freezer Extreme soon coz the Freezer7 Pro is keeping my quad core cool at 3ghz but more than that the performance tapers off. It's not big enuf for high overclocks on a quad core. Just too much heat.




The plans for new ram will be revealed soon hopefully.





No. Coz the 2400 Pro doesnt run hot. All the low end cards dont run hot. In fact most of the low end cards oni haf a passive heatsink but I opted for 1 with a fan coz it's gonna be sandwiched between 2 heat monsters.

---

Added on October 15, 2007, 4:01 amWheeeeeeeeeeeeeeeeeee. King Kong jsut got more new toys to play with.



This post has been edited by ianho: Oct 15 2007, 04:01 AM

Here's sumthin I just did for King Kong. I did this for better air intake to the 8800GTX SLI. I wanted the 2x120mm intake fans right at the top of the case so it will blow directly at the gfx cards. The intake plate mod I've done this time is for temporary use only. I will be making a whole new plate with a different look soon.

Here's how the old intake plate looked like.








This is the old fan plate on the inside. The fans are at the bottom n blowing mainly at the lower gfx card n the CPU.
















This is what I did for the new plate. Masked n marked the old intake plate for cutting.

















This is what I get after cutting the old intake plate. A separate DVD stealthing plate instead of the 1 piece look previously.

















Stealth plate mounted on the DVD drive.

















Next thing was to make a new fan plate for the intake fans.















All the parts ready for assembly.















Front intake n fan plates complete n ready for installation.

Intake fan plate installed. U can see that the fans r right at the top of the case. The DVD drive slot is at the bottom now. This will ensure lotsa air gets to the gfx cards at the top.











On 1 of my trips to the local ACE hardware shop, I found this nice air cond filter. It's made from a special kinda foam which lets air tru without much restriction.










I cut out a piece to fit behind the intake plate so only nice clean filtered air gets into the case.










I also used the filter foam on all the other mesh intakes like the side panel in this pic.












This is how King Kong looks like now with the new front intake plate. The DVD drive is now at the bottom n separated from the intake plate. Much easier to remove the intake plate for cleaning now as it isn't connected to the DVD drive at all. IMO, it doesn't look as nice as the old 1 piece plate. Oh well, it's a temporary solution till i design a whole new plate.





This post has been edited by ianho: Oct 28 2007, 02:48 PM

hahah it's still a nice piece of mod ... seems like u never got satisfied Ian ...

btw how much does the gc get cooler by pointing the 12cm fan directly on to it ??

I did from side before and it was 5 degrees immediately .. so what about this mod.. ?

hehe can't wait to see AC Freezer Pro lies on ur King Kong II bed ... .

uncle, i guess, it would be much better if u spray a dvd stealth plate exactly same like the basic color, it seems like a bit whiter than the background color, or maybe it's just an impact of the lightning around? nice job indeed

It's from the same piece of brushed aluminum. The color is exactly the same. Just the reflection of the camera flash n ambient lighting makes it looks different.

yeah, that's what i thought actually, bravo modded tj-07, heh2eu2h,

I've used the exact same foam from Ace, great as it's only RM5 for a big piece.
But it does clog up pretty fast, which shows that it does it's job filtering dust, but also necessitates frequent cleaning.

Started end of January...now it is November.. suddenly so quiet.. any more updates tyco?
Or waiting for 45nm CPU or 9xxx VGA?

me as well ! i cant wait even that atrix the lousy case update till that point liao den dont wana continue ! mod more ma give chance to those cheap scate casing lo !