I just bought a Beelink GT1 Utimate, there are many custom and original roms posted here. May I know which is the best rom for Utimate? Can we use the non Utimate GT1 rom for ultimate? Is non Utimate version has more roms?

Is it true that GT1 performance better than GT1 Utimate? And it is not necessary to buy Ultimate?

the difference gt1 standard and ultimate only on ram and rom

for firmware preference cannot comment.. some people like android tv, some like standard android

android 6 also got android 7 ..

personal used .. GT1 - android 7 superceleron

SEA I - android 6 superceleron

mini mx3 2 - android 6 stock firmware

mini mx3 - android 5 minix firmware

the difference gt1 standard and ultimate only on ram and rom

for firmware preference cannot comment.. some people like android tv, some like standard android

android 6 also got android 7 ..

personal used .. GT1 - android 7 superceleron

SEA I - android 6 superceleron

mini mx3 2 - android 6 stock firmware

mini mx3 - android 5 minix firmware

Thanks for the info.
I learned that superceleron firmware make the performance of the box faster, but the temperature will increase as well.
May I know how fast the performance of box and temperature increase? Not sure whether it is worth to flash with that firmware? Worry it will reduce the lifetime of the box due to overheating.
Also is there any big different between android 6 and 7. Or I should just keep it to the original firmware which is Android 6?

gt1 with android 7 temp 50 to 60C ... my gt1 with heat sink 50C

advantage android 7 ..no more dark movie


Attached thumbnail(s)

A hello first time to the community!


I have the text translated. My English in the case would not suffice here.

For 2 months I have the Beelink Ultimate G1 at my home. The installed software is so slow that I do not use it.
That's why I would like to equip the box with an alternative Rom. Ideal would be the Twrp Recovery and root.


In the Internet I am now pushed on this site but need some help with the right Rom.

Model: Beelink Gt1 (32gb) (DDR4)
SN / g912g *****
Version: 6.0.1
Android Secure patch Level: 1.August 2016
Build: Gt1_311m0


If I have understood correctly (and have the right Rom) I install the USB burning tool and let the usb stick set up. Then simply stick the stick to the TV box and turn it on. Then the box should automatically load from the stick or?



Thanks for your help!



_dude

here the alternative rom you have to try

http://freaktab.com/forum/tv-player-suppor...e-roms-tools-ch

android tv or standard android

for installation

*.img for installation thru usb burning tool (need usb male to male)

*.zip for installation thru sd card/thumb drive (just copy file to sdcard/thumb drive)

Just sharing. My box beelink mx3-2 having the same dark movie with everything stock as it is. Found out this fix that worked on my box and my friend GT1.

https://youtu.be/7mVGfuGvbLQ

Hello Khalid21 and thank you for your´e help.


I have a small problem i hope you can help me.

So i tried:

USB
I downloaded the standart android image. It is possible that i need extra drivers for windows (8.1 & 10) for the usb-burning tool? In the tool the box is not displayed to me...(Usb - Port on the left side)


SD

I Downloaded the Amlogic Burn Card Maker v2.0.2.

I selected the 32GB SD (New - Sandisk -card) as the output disk, and checked the following:

[x] To Partition and Format.
[0] erase_bootloader
[x] erase_flash
[forcefully erase all]
[x] reboot

and the downloaded image.

I have started the box but it loads normally android....same result by restart.


Where is my error?



_dude


ps: sorry for my bad english, I tried it myself this time

when burn sd card make it default

before power on - press reset button - twrp pop up

or

using update and restore apps

youtube video on my 1st page

This post has been edited by Khalid21: Aug 20 2017, 10:55 AM

I know it's an old issue, but could not find any answer. I have the Beelink GT1, has anyone managed to run Astro Go on it yet?

So far no

Hello Khalid


Thanks with the reset button it worked. Via usb modus I have only errors... but with the sd card it worked.....The Twrp Recovery dosn´t start but the installation was successful.
The Rom runs without problems, very fast. Great Work.



Thanks you for the help


_dude

Hi pluginbaby,

May i know which url you follow to flash your gt1 ultimate box with superceleron firmware? I bought an usb male to male cable, but my notebook cannot detect the box after insert the cable to the otg usb port at the box, is there different type of usb male to male cable? can you share where you bought this cable?

thanks.

I bought at All IT. Previously it worked on my box but now usb burn tool cant be used anymore and keep throwing me error at 2%. Managed to flash after using sdcard method.

Did you install the drivers correctly? It will show up as world cup driver on your windows pc once u connect it after the reset button press. Once drivers are all good, just try different PC ports or on different PC too. Some work while some doesnt. And another thing is make sure u use the Side USB port on your box (OTG/Host) port beside the sdcard slot and not the one at the back to connect to your PC when flashing.

anyone has non rooted rom for gt1. my hyptv cannot work on my gt1 becouse of rooted issue

my hyptv work on my android 5

which rom you use. any link?
hypptv, all chanel works?
mine only tv1/tv3 works

Are you using android 5

Mine minix u1

my stock gt1 is factory rooted.