its better to have simple route. dont make it complex. so, can troubleshoot it easily if there is some error

Hi, i am look for access point to extend my factory Wireless signal, currently i am using Streamyx 4MB. Any suggestion on which wireless AP to use ?

Currently my setting for wireless AP is Tp-Link WA830RE somehow i felt the wireless signal is not strong enough at some spot.

This post has been edited by fairypark: Nov 14 2016, 10:08 AM

You need wireless to cover a particular area or need cover all the factory floor? Wireless signal is not strong at some spot due to distance?

Yea Bro perhaps that the easiest way right, really keen to have setup network for gaming with lowest ping possible... hehe ...

Hi,

May I know how is the capability of AC LR model for 2 semi D house with just for Wifi hotspot purpose? There are quick numbers of edge of wall due to re-construct it 2 in 1....or any proposal?

Planned to use TM Unifi modem and connect to one Wifi router as hotspot...

unifi internet speed, its better use ac lr + now its end cycle of uap lr.

uap lr and uap ac lr range is the same at 183m (600 ft). But AC LR able to run simultaneous band. and have 5Ghz frequency.

while uap lr only have 2.4Ghz

Speed and Range values may vary and are based on optimal environments..

Do you think its sufficient to fully covered 2 semiD house with total build up area 60 x 70ft?

Can you provide me model and price for the wireless router?

thanks.

1 unit for each semiD? based on my exp, 2 unit per semiD at least. then able cover all floor. + position also influence the signal

any company that can set up configure ubiquiti devices for unifi?

you can check the details on on first page. or check master reseller on ubnt website

what router are you using?

How about if ER-L paired with TS-8 to drive 3 AP AC (LR)?

Does ER-L have real advantage over ER-X?

Then you might as well use ERPoe-5 if you only need 3 POE ports. If you only need the POE output, TS-8 is abit under utilised. Unless you thinking of getting 5 pack.

The main advantage of ER-L over ER-X is due to routing performance between networks (multiple subnet or VLAN) plus some other hardware acceleration/offload such as IPSec hw acceleration (ER-X also had this but slower). If you want to use it for non hw accelerated function such as QoS or OpenVPN, it will actually be slower than ER-X in that particular task. But I recommend Mikrotik hEX R3 (similar processor as ER-X & can run Dude server) over ER-X unless you need full OpenVPN server or other features in EdgeOS not available in RouterOS. Mikrotik hEX POE is good low budget choice with POE 802.3at support, the CPU is slower than hEX R3 & ER-X, but still pretty decent.

This post has been edited by jio: Dec 20 2016, 06:54 PM

Hi, please quote me your best price for Edgerouter Lite include postage to sabah.
Thanks.

the set up is for home use:-

Unifi Fiber Modem

-ER-X

--Desktop

--Desktop

--TS-8

---Android Box 1

---UAP‑AC‑LR 1

---Android Box 2

---UAP‑AC‑LR 2

---CCTV DVR

---UAP‑AC‑LR 3

---Desktop

I am not sure whether I need those extra features or not

I am looking to get the best experience and reliability based for unifi

Hey guys, i have made a tutorial for setting up edge router with unifi or maxis with iptv. Hope it helps. Cheers

wow... amazing.... never tried it.... works so far?

Yup, been using it for months now. Helped a few forumers here too. I have been getting a lot of request. So i decided to post it to the public so everyone will be able to set up theirs easy.

thats great... i never had chance to try it.. even i have unifi. Since im always away totally no chance to try.. are you blogging?

No i have not, blog does sound like a good idea. Im no expert, but im gonna try to setup my own web server soon, who knows. Always away huh, sounds like u have a better life than i do. Btw back to the topic, u can give it a try sooner or later. Its more like a 15mins setup for a first timer. Its only click click n done. Cheers

This post has been edited by wanttotree: Dec 27 2016, 10:24 AM