I just recognize the lavatube (or is it lambo) and itaste vv. I dont have my old stuffs anymore, dunno where i put it. Kinda miss them, especially those pinoys stuffs, right before they ban Malaysian vaper. Lol.

Im letting go my Efusion Mini DNA200. Pm me for more details

Latest Mooch's post:

Been using RA-D for the past 4 days. Noticed there is leaking near d airflow every 2 days. Once changed the cotton its good to go. Sometimes d juice will come out by itself or when i use tissue to tap at the airflow. Twice the cotton n tank was reset by experience guys.

Besides, after vaping constantly for like 10 sec, there are "wap air" in the tank. I'm firing at 29w.

Is it normal? Any sifu can advise? Kinda annoying when the juice came out in ur pocket...

This post has been edited by dp82: Sep 17 2016, 07:50 PM

try replace orings

Orings mean da black color rubber thing?

yupe

Nitecore 2 bay
https://shopee.com.my/Original-NiteCore-i2-...316872.10041303
https://shopee.com.my/Nitecore-i2-Charger-i.2203047.5097525


Nitecore 4 bay
https://shopee.com.my/Nitecore-i4-Battery-C...203047.41053744


Xtar 2 bay
https://shopee.com.my/XStar-MC2-Charger-i.2588009.9133388
https://shopee.com.my/XTAR-VC2-Plus-MASTER-...571941.29377498


Xtar 4 bay
https://shopee.com.my/VC-4-Xtar-Intelli-Cha...829354.44864121

Hi guys, im selling 2 used tanks.

1) Ori Geekvape Griffin (22mm?). Bought last march/april. Used about 3 full tanks.

2) Ori Geekvape Avacado 24mm. Forgot when i bought. Used once.

Selling both as a set for RM110. Urgent-ish sale. Wanna buy a dripper.

PM me if interested. Thanks.

Apa beza between VC 4 & VP 4 boss?

VP4 small LCD. VC4 bigger LCD (and basic analysis functions). Also VP4 is run from a power plug (and can therefore charge faster), VC4 is USB powered.

This post has been edited by Eiraku: Sep 20 2016, 10:59 AM

Ahhhh... I'm hunting for a good charger as well. My nitecore D4 died on me twice.

VC4 : Dual mode chargers and it charges both Li-ion and Ni-MH/Ni-CD batteries.
-Samsung, AW, Sony, eFest, and MNKE are rechargeable Li-ion batteries ("Li" printed on battery). Ni-MH/Ni-CD rechargeable batteries are the "common" batteries (AAA, AA, D and C) that we use every day (remote controls ,clocks, radios. etc...).
- Max charging 1A with 2 battery (longer battery life)
- most version only provide USB power, do you need compatible power adapter)

VP4 : charge for Lithium only.
-supply with power plug (no need to buy adapter)



COnclusion :
Both are 4 independent channels, both support maximum 1A charge current but I believe VC4 can only push 1A in bays 1 and 4. Both three charge current options (0.25 A, 0.5 A, and 1.0 A).
VC4 can also charge NiMH batteries for non-vape needs, VP4 can only charge Li-Ion for vaping (and flashlights, etc).

Both can recover batteries discharged too low and great choice for vaping.

Just placed my order at Gearbest. Damm, their promo price for Sammy 30q is dirt cheap!

Yeah, damn cheap. Bought another 4. Runs cool too.

Downgraded my LG HG2 for 18650 power bank.

Bro andyng38 Therion DNA133 already available at VaporHub.

Thanks for alerting me!

Anyone using IPV Mini 2?

My mod keeps telling me check atomiser, swapped different tanks/drippers and all same result.

Swapped tanks to other mods OK. Why like this one?
Did some search and they say something about 510 connector but my mod looks fine inside (opened up)

First, double-check to make sure the coil head or the mini-RBA is nice and snug. Try disconnecting the coil head or mini-RBA a few times just to be sure. When tanks like this are new, the threads tend to be a bit tight.

If that doesn’t solve the problem, you probably need to adjust the center post in the airflow collar. This is a floating post and if it doesn’t make contact with the bottom of the OCC coils or the mini-RBA, the mod doesn’t think that you have an atomizer connected.

Open the tank as if you’re going to change the coils.
Remove the coil head or RBA that you have in place.
Look down at the airflow base. See that copper pin in the middle? That’s the troublemaker.
Flip the airflow base over.
Push on the copper pin to seat it more deeply into the base. This takes a good amount of pressure. You may need to cup the base in your hand and push it against a desk or other hard piece of furniture.

Any easy to maintain tank to intro for lazy man?