prob located >> apparently the rear assembly comes loose after a few round .. need to push the motor in abit ... then press the rear rotor / gear back in abit
so to have continuous fun is quite difficult
will have to look at option of replacing it with those rear rotor bolt on direct onto motor without any gears one laa ... have to spend more $$$

---

Added on April 6, 2009, 10:40 am i am not going to replace it with ORI one liau ...
saw a brushless tail motor for 4G3 online this morning ... but not cheap at all laaa
the rotor bolts direct onto motor ... no gears

desmond .. need to ask u something since u got parts and play heli long time liau ... the 4#3b tail holder can fit/replace the 4G3 tail or not ??
if i fit a small little 8000kv brushless to replace the tail rotor ... i can just plug that motor cables direct into the 4 in 1 ??

This post has been edited by QiW: Apr 6 2009, 10:40 AM

looks like this rc heli is NOT THE IN thing at the moment ... LYN such huge data base of users oso a few ppl playing only .. hahahahaa

Allan,

last nite i replace my tail motor, the problem like urs gone immediately.

i need to check if both are the same. i only fly copterx for about 2yrs, this walkera heli is still very new to me oso.

Allan, i believe all the heli flyer migrated to other forum liao lor... But the BTHO fly site still exist and more plp flying there liao.. Sometimes got dog fight also... Hahahaha...

i am still awaiting BL ready made solution .. so far costings is about usd25 without shipping .. hehehe
pay usd25 once off better than always have to change motor and gears lorr

---

Added on April 7, 2009, 9:57 amya .. the BTHO place still got regulars i believe
but most if not all of them oso know each other quite well already one .. and they dont like the look of small helis which i am currently trying to learn .. small helis can still play around in the house on a rainy day maa ... and lipo oso much much much cheaper !! huahahahaa

nvm ... when got budget and times get better i can always upgrade to nitro heli laa
reason i think nitro is more efficient in the long run ... charge minimum electrics = minimum lipo costs .. only PAY WHEN U PLAY ie. glow fuel only lorr .. parts almost same price as well known electric heli brands ... no need to worry about not enuff lipo when u are at the flying site .. not so worried about lipo becoming pregnant when throttle kow kow too much and lipo charge level and lipo life span etc etc ...

on set back is the initial cost lorr .. hahahaa
but times change ... who knows ... maybe i give up leh ?? huahahahahaaa

This post has been edited by QiW: Apr 7 2009, 09:57 AM

the 4G3 and 4#3 tail motor holder is not the same one .. but i think can interchange la .. so the option on which motor to choose and mount is more flexible lorr
change tail motor now .. 1-2 weeks later kaput same prob again .. will be never ending case of changing stock motor so might as well go BL

aiyooo ... even the kwai lohs are having headache with the BL tail setup on the 4G3 .. and its super expensive .. hahahahaaa
maybe should wait abit and see if walkera comes out with a plug and play BL setup for the tail to address this prob .. hehehe

just bear with it, save some money, get a few motor to replace. i dun wanna do that spektrumized liao. LOL

Any bukit jelutong regular flyer here?

me newbie .. trying to fly a micro .. which i was told will be much more difficult to learn than a regular 450 or 500
bkt jelutong abit too far to go for me coz i am in cheras during weekends .. if weekdays evening then can la coz i pass by shah alam almost every weekday

Bukit jelutong full of very keng 3D flyers!

yeap, been there once..saw one guy crash his 8K heli T-Rex700

---

Added on April 8, 2009, 12:58 pmmicro?...lol there's no way of learning anything with a micro...get the Esky lama V4

This post has been edited by ecyc1984: Apr 8 2009, 12:58 PM

haha lamav4, get the walkera lama2.

the micro i am trying to fly is a CP with 3D capabilities one laa
i already gotten passed that coaxial blades stuff liau .. hehehe

http://rcdreamz.com.my/webshaper/store/viewCat.asp?catID=38

http://www.rcsmart.com.my/webshaper/store/...at.asp?catID=64

---

Added on April 8, 2009, 1:41 pmbelt cp?....





This post has been edited by ecyc1984: Apr 8 2009, 01:47 PM

no la ... not belt cp ... its alot alot smaller than the belt cp
and it runs on a 3.7 1S lipo only ... saves me lipo costs ... hahahhahaaa
its a walkera 4G3 ... go google it and see la

was involve in the heli exhibition in KLGP RC 2009 @ titiwangsa..might as well share it with you guys...this was taken by my girlfriend

---

Added on April 8, 2009, 1:51 pmyou mean the 250 size heli?

oh okok..nvm nvm..you already put there walkera 4G3 =P didn't see that coming

---

Added on April 8, 2009, 1:54 pmhow's the heli, issit good?

This post has been edited by ecyc1984: Apr 8 2009, 01:54 PM

wah align freak. do they have the new and latest align 450 pro?

---

Added on April 8, 2009, 2:09 pmthere...above picture

---

Added on April 8, 2009, 2:10 pmAlign is launching the 450 V3 soon or launch already..dunno...must ask my friend later

---

Added on April 8, 2009, 2:29 pmthis is the V3 i think....thats what they said..the body is different compared to the V2

http://www.heliproz.com/prodinfo.asp?number=315074

This post has been edited by ecyc1984: Apr 8 2009, 02:29 PM

walaneh ... $$$$$$$ !!!!!