with walkera oso have to do some work with the links/arms one laa ....
even 450 helis oso sometimes need to work the links/arms one maa .. nothing is perfect unless u pay alot of $$$ to have yours custom made by pros laa .. hehehe

For my 450, i just set all the servo value to '0', then linkage arm to where it should be near to neutral, then fine tune using the TX, neither R/L or U/D value.

This post has been edited by cliffang83: Jun 23 2009, 08:43 PM

well .. its much easier on the 450 .. just 90* the servo horns (this one have to manually do lorr) and then the rest done from tx
on RTF setups how to give u tx that costs more than the whole setup itself ?? hehehehe
so they limited function tx lorr ... for that price

swash level and tracking oso have to adjust arms one maa ..

This post has been edited by QiW: Jun 23 2009, 09:07 PM

No worries, you'll understand how easy it is when you set up your 450 Pro
You've become more pro and pro each day.

---

Added on June 23, 2009, 9:42 pmCheck this out... http://malaysia-rc.com/index.php?topic=8521.0

This post has been edited by cliffang83: Jun 23 2009, 09:42 PM

rm800+ for clone with ESC and motor ... add servos + gyro ... thats another 500-600 at least
so roughly comes to about 1400+ ... add another 100+ can get the real thing ... which one u think u will get ?? hehehehe

well ... i am putting back setting up the 450 pro .. wanna get my 4g3 into perfect condition and and do at least perfect hover laa
then i unleash my 450 pro .. by then i would have no probs hovering the thing anywhere anytime coz i can already do it on the G3 ... that cuts down crash costs alot alot alot oohhh ...

Nice planning you got there. For me, a crash kit for my 450 Se V2 will do...
Remember to post some video next time when you can 3D your 4G3.

3D on my 4G3 ?? slow slow wait laa u ... hahahahaa
tail in >> nose in >> FF >> then maybe try abit of inverted laa .. hahahaha

Allan learning very fast wan... i think by next month or so can do inverted flight liao... By end of the year doing skill flying with his Pro 450 liao... Hehehehe...

bugger ... like that oso can find out my plan one ah u ?? hahahahaaha

I have faith in u mar...
This weekend bring along your 4G3 wor...
I wanna hear the blade sound also...

the blade sound of the 4G3 cannot match the big 450 and above size ones laa ... but still sounds very nice indoors .. hehehehe

yeah ... i plan to really get my flying level up FAST ... hovering around all the time when i see ppl can do so much other stuff is no fun la ... hehehe

They all also take time to learn mar... Not 1 or 2 month but is 1 - 2 year wor...
Mostly all manage to fly 3D after 2 years wor...
But i think u 1 year can liao...

i oso hope so la ... hahahaha

Some can 3D within a year some 3-4 year also can't 3D very well. It's depend on time allocation and $$$$ factor.

yeah ... spend lots of time on SIM .. then just go out and whack only la rite ?? hehehehe

the last 3 hours i spent rebuilding my 4G3 .. too many previous crashes and no maintenance .. i just normally replace parts and fly only .. hehehe
so now align and level everything .. reposition electronics that are messy .. made new hole in canopy to further allow more space in front so that the vibration from canopy dont screw up my 4n1 ..

btw .. my esc for the main motor dying liau .. rated at 5A i think maybe not enuff laa .. can see leaking IC already .. but motor still perfect spot on

now waiting for my new inrunner & new ESC to arrive ... should be these few days la .. so no flying until my inrunner arrives ... back to the assembling 450 pro then .. hahahahahaa

This post has been edited by QiW: Jun 24 2009, 09:47 PM

Allan i manage to change my tail motor and fine tune my 4in1 liao...
Now is flyable liao... But still need to catch the tail abit... Can't really tune it till rock steady...
Very happy liao... Hover 4 pack battery liao without major crash...

good maa ... can hover around without crashing oso damm song liau .. hahahaha

the 4n1 gyro very limited one la .. same like my 4g3 .. have to manually catch it one
if wannabe rock steady then have to use standalone tx and gyro then only can get good performance like those bigger helis ... all oso $$$$ ... hahaahhaa

well .. my 5A main motor esc is just about dead ... could not stay in the air for more than 10 seconds of controlled flight
so i opened it up and this is what i saw ... its so hot even the solder is running down to the plug abit

still waiting for my inrunner + esc ... should be here these few days ... in the mean time ... no flight time .... again !!!

---

Added on June 25, 2009, 8:40 amps ... the trex 450 PRO is selling at rm1459 at mega shop !!!!
the clones are all dead liau like this ..

---

Added on June 25, 2009, 8:41 amps ... the trex 450 PRO is selling at rm1459 at mega shop !!!!
the clones are all dead liau like this ..

This post has been edited by QiW: Jun 25 2009, 08:41 AM

Wow, that's nice price.... great... another choice to consider...

Walao the solder also melted... Must be the esc not matching with the motor kv...

Wah trex 450 pro so cheap liao the super combo package...

---

Added on June 25, 2009, 9:07 amYalo... but sadly the tail boom give way liao...
Must be last time crash too much with it till crack liao i din notice...
Hahahaha... Happy too soon...

This post has been edited by hitz: Jun 25 2009, 09:07 AM