Erm, typo eh. Its 3.6ghz. Haha. So VT-Ten, is your matter solved yet?

3.6GHz for E6850 should be nothing becoz E6600 also should done it easily. The new proc should oc near 4GHz mark.

yeah..e66 easily hit 3.6ghz..e6850 shud b done more than that..summo its cooler than e66..can try hit beyond 4ghz

Here's my result..

Air cool by TT Big Typhoon VX


Attached thumbnail(s)

Here is my result with e6750.

420x8 for stock vcore.
455x8 for 1.45 vcore.

no screenie ka bro...
but these new proc really making a good entry...great performance wif great price...i bet many will change their proc soon...

The screen shot that I done. Do you think FSB still can go further?

nice result..oc need try n error..so try put mo fsb bro..mite can go further if not hit wall yet

The BSOD im experiencing are not entirely from the graphics oc. defaulted the gc clocks still experiencing OC errors (BSOD, frozen screen, post fail etc)....

so far managed to pump to 3.825Ghz @ 1.55vcore. need kinda high vcore if you ask me. tried to push further, even pumped to 1.6vcore, but will get screen lockups and POST fail.

hmm... even my previous e6600 can push to 3.844 with similiar settings, but my e6850 cant?




Attached thumbnail(s)

One question, wat volts are ur ram running at? Base on ur speedfan readings, vcore2 is supposed to be vdimm. I am not sure if that applies to all boards, but my dq6, vdimm is vcore2 in speedfan.

ram volts running at 2.225v. prolly different boards will be differently by speedfan.

Wat about the ram speed? Running 1:1? U might wanna increase those vdimm to test out. My Crucial runs at 2.5v.

I see from your screenie that your 12v is just 11.9v....If that is the case, once on load, it will drop further. Mine is always at 12.3v...on load 12.1v.

This post has been edited by extremeocer: Jul 22 2007, 01:09 PM

ram speed was left stock at 400mhz.
as for the 12v readin, not sure if asus probe is readin it correctly or not...

Something weird about it... Seems that Core Temp and Everest 4.0 cant show the CPU temp correctly for E6850 as Asus Probe temp is much higher than those showed on CT and Everest.

Anyway, E6850 is a nice and cool proc. Reaching 4ghz is like walk in the park. Currently priming at 3.8Ghz 1.4Vcore.

Oh ya... The result is from my new board; Asus P5K Deluxe.

My DFI Infinity P965-S already been reserved. Thanks for all the interest.

irangan if you could state your timings above in the screenshot that would be nice

4005 = 445 * 9
DDR 1100 CL4

Vcore 1.48
Vdimm 2.2

VT-Ten:

list down every of ur oc setup

Proc speed at what vcore
ram speed at what vdimm

have u tried to put back everything back to stock?

run ur proc,ram and gc at stock and try to orthos kaw kaw.

this is my current setup;

400x9 @ 1.52vcore
NB 1.4v
Sb 1.4v
1.2VHT 1.45v
VTT 1.5v
vdimm 2.225v
timing 5-5-5-18 2T @ 400mhz

proc idle temp 29C core0 and 23C core1. readings are identical using asus probe, speedfan, coretemp, rivatuner & everest. load at 48C & 46C on the respective cores.

pc hung after orthos for 2 hrs using the above setup.

This post has been edited by VT-Ten: Jul 23 2007, 01:25 AM

Sure regretting selling E6600, but it may be something wrong tht u did not discover yet. Be patient and pray for ur E6850 can go higher.

you bet! got hammered by my wife when i told her that i spent a couple of hundred to top up for a proc that (currently still) couldnt outperform my previous proc

This post has been edited by VT-Ten: Jul 23 2007, 01:58 AM