Outline ·
[ Standard ] ·
Linear+
Nissan Sentra CLub, LYN Sentra User
|
Vanquish
|
 May 29 2008, 12:13 PM
|
|
QUOTE(northiswara @ May 28 2008, 12:43 PM) if want to overhaul, better take full overhaul so next time wont need to operate the engine again. after overhaul can drop in a BOT boost 1bar. Yeah, that's right...  QUOTE(NISMOgan @ May 28 2008, 03:31 PM) mangsa_prejudis : oh headlight keke, which year r u using? 2001-2003 one got, the rest i canot find any yet. unless u go for retrofit, 2 of our member did it, but they r not so active lately. tcl_dreamcast : yeap i did smoke my headlight. actually it depends on workmanship. it wont crack if they know what they r doing. for my headlight it has no problem for already 2 years. but u cant direct spray water with those pressure gun at high pressure. it will have some mist inside it and gone later. » Click to show Spoiler - click again to hide... « Nice job on the headlight, looks way cooler than the ori one... I still got my JN15 Pulsar headlights, grille and bumper, they look really nice but some told me that it can be installed onto my B14 without mods and some say cannot becoz brackets are different...  This post has been edited by Vanquish: May 29 2008, 12:13 PM |
|
|
|
|
|
boonpeng
|
May 29 2008, 04:28 PM
|
Getting Started
|
QUOTE(northiswara @ May 29 2008, 10:29 AM) 14" to 15" got difference, looks better from the apprearance. 16" of cozs looks lagi better. Vanquish has a 16" rim if not mistaken. power drop if u using too big rim cozs 16" rim is heavier and the width is greater than 15" width. its either u want pretty big rim or performance. if u want 17" rim and yet got power, then have to transplant sr16ve or BOT the engine. I think 16" ngam ngam... I really cost me alot if want to transplant for the 17"... No need to waste that money... Anybody have idea for the 16" rim and tyre? |
|
|
|
|
|
advanceNissan
|
May 29 2008, 06:07 PM
|
Getting Started
|
Does anyone out there know that whether Sentra N16 is OBDII, OBD2 or EOBD compatible? I would like to buy a computer scanning tool which only support these 3 formats. Anyone know this please give me some advices. Thank you.
|
|
|
|
|
|
northiswara
|
May 30 2008, 11:13 AM
|
|
|
QUOTE(advanceNissan @ May 29 2008, 06:07 PM) Does anyone out there know that whether Sentra N16 is OBDII, OBD2 or EOBD compatible? I would like to buy a computer scanning tool which only support these 3 formats. Anyone know this please give me some advices. Thank you. N16 should be running on OBDII - Onboard Diagnostic System (codes can be read/erased by a variety of readers, ie Actron) ACTRONnissan consult 2why u want to buy the tool? its not cheap and u only can scan for error and tune a bit things. i think better buy a emanage and tune ur AFR to get more power and better FC and emanage would be cheaper a lot than the diagnostic tool. tan chong has the diagnostic tool which u can go there ask them to check for u.
Added on May 30, 2008, 11:21 amNissan tunning softwareThis post has been edited by northiswara: May 30 2008, 11:21 AM |
|
|
|
|
|
advanceNissan
|
May 30 2008, 12:42 PM
|
Getting Started
|
QUOTE(northiswara @ May 30 2008, 11:13 AM) N16 should be running on OBDII - Onboard Diagnostic System (codes can be read/erased by a variety of readers, ie Actron) ACTRONnissan consult 2why u want to buy the tool? its not cheap and u only can scan for error and tune a bit things. i think better buy a emanage and tune ur AFR to get more power and better FC and emanage would be cheaper a lot than the diagnostic tool. tan chong has the diagnostic tool which u can go there ask them to check for u.
Added on May 30, 2008, 11:21 amNissan tunning softwareReally arr? I also don't know lar, just saw it and the price is around RM500-RM600, some more can see the fuel economy gauge as well, so can get much better FC lor if follow the economy fuel gauge. Actually what is E-Manage? How to install it and how much does it cost? |
|
|
|
|
|
NISMOgan
|
May 30 2008, 01:57 PM
|
|
|
boonpeng : i`m using taiwan lightweight 16". my ori was 14". the FC nd power is just as same. not much diffrent. as for ur budget 1500 for 16" is quite tight with tyres. unless u get a commercial tyres, but it is not so good. tyres is very important as its the only contact path, so y not stick to stock, save a lil bit more and get a better than normal tyres?
vanquish : oh that means u still keeping the sets of light, grille of it? bracket can be modded ma. hehe sure cool. install it lah. btw my fren is looking for B14 GTS bodykit, and also B14 clear front headlight. anyway u can locate it?
|
|
|
|
|
|
mangsa_prejudis
|
May 30 2008, 02:04 PM
|
Getting Started
|
i dont know what it called.. i just called it grilled.. how much to change this thing to a grilled one? is it expensive? This post has been edited by mangsa_prejudis: May 30 2008, 02:13 PM Attached thumbnail(s)
|
|
|
|
|
|
mangsa_prejudis
|
May 30 2008, 02:13 PM
|
Getting Started
|
to someting like this.. whut tis called ah sifu?  hehe Attached image(s) |
|
|
|
|
|
northiswara
|
May 30 2008, 02:49 PM
|
|
|
QUOTE(advanceNissan @ May 30 2008, 12:42 PM) Really arr? I also don't know lar, just saw it and the price is around RM500-RM600, some more can see the fuel economy gauge as well, so can get much better FC lor if follow the economy fuel gauge. Actually what is E-Manage? How to install it and how much does it cost? emanage is a piggyback ecu tat can tune ur AFR. where is ur location?
Added on May 30, 2008, 2:49 pmQUOTE(mangsa_prejudis @ May 30 2008, 02:04 PM) i dont know what it called.. i just called it grilled.. how much to change this thing to a grilled one? is it expensive? that is grill. price is cheapest rm0-100++ accessories shop got.
Added on May 30, 2008, 2:50 pmhttp://www.mohdparts.com/ this will tell u about emanage. This post has been edited by northiswara: May 30 2008, 02:50 PM |
|
|
|
|
|
NISMOgan
|
May 30 2008, 05:41 PM
|
|
|
mangsa_prejudis : yeah u can get it at those shop ready made for ur model (rm100~200), or u can custom made it at shop (cut ur ori grille) at less than rm100, or if ur a DIY person, can DIY also  |
|
|
|
|
|
mangsa_prejudis
|
May 30 2008, 10:05 PM
|
Getting Started
|
ooooooo...
really??? tomorrow i ll get one..
thank u guys..
my car is at the wokshop changing the gearbox bearing now..
wtf..i would one to diy..
but i want to keep the ori one..
for safety..
Added on May 30, 2008, 10:53 pmbro northiswara..
pm ur number..
maybe we can TT later..
but dont tease me..
my ride is still nothing..
hahaha
This post has been edited by mangsa_prejudis: May 30 2008, 10:53 PM
|
|
|
|
|
|
boonpeng
|
May 31 2008, 10:49 AM
|
Getting Started
|
QUOTE(NISMOgan @ May 30 2008, 01:57 PM) boonpeng : i`m using taiwan lightweight 16". my ori was 14". the FC nd power is just as same. not much diffrent. as for ur budget 1500 for 16" is quite tight with tyres. unless u get a commercial tyres, but it is not so good. tyres is very important as its the only contact path, so y not stick to stock, save a lil bit more and get a better than normal tyres? Bro, thanks for your advise... Then I'll stick with the 14" stock rim, save for a better tyres. Btw, how much is your 16" rims and tyres? Planning to smoke my headlight, wonder how much you pay for it?? |
|
|
|
|
|
Vaiz
|
May 31 2008, 12:53 PM
|
Getting Started
|
How strong is a Nissan bumper can support an impact? If is a bumper to bumper bang? Compare to other cars bumper?
|
|
|
|
|
|
mangsa_prejudis
|
May 31 2008, 01:59 PM
|
Getting Started
|
bro vaiz.. u want to bump who? haha..  |
|
|
|
|
|
mangsa_prejudis
|
May 31 2008, 02:22 PM
|
Getting Started
|
so sorry to hear tat..
bang by wut car?
sui cha bo ha?
|
|
|
|
|
|
northiswara
|
May 31 2008, 03:38 PM
|
|
|
QUOTE(mangsa_prejudis @ May 30 2008, 10:05 PM) ooooooo... really??? tomorrow i ll get one.. thank u guys.. my car is at the wokshop changing the gearbox bearing now.. wtf..i would one to diy.. but i want to keep the ori one.. for safety..
Added on May 30, 2008, 10:53 pmbro northiswara.. pm ur number.. maybe we can TT later.. but dont tease me.. my ride is still nothing.. hahaha i wont tease u but i will insult ur car. haha............. when i got my car. lagi teruk lerr. the front tyre is bigger than rear tyre. looks like kereta kerbau. teruk lagi! exhaust all rosak. absorber rosak and drive my car macam drive the bulldozer. then slowly slowly replace it.
Added on May 31, 2008, 3:40 pmimported car bumper sure tahan than the local bumper. this one for sure. but please dont try the bumping game on the road. hehe.......
Added on May 31, 2008, 3:41 pmany good brake pad that can intoduce? This post has been edited by northiswara: May 31 2008, 03:41 PM |
|
|
|
|
|
Vaiz
|
May 31 2008, 04:12 PM
|
Getting Started
|
Is a myvi drove by a woman, i dunno what is the road name but is near federal highway. Thursday morning around 8am, the traffic there normally is slow as usual, when the car infront of me stops so i stepped on the brakes and this shit occur "bang"...
The sound is quite loud till the driver infront of me look back his rear view mirror and thought i banged his ford ranger, but the traffic was quite jam so i cant double signal and pull aside and my father was sitting beside me and told me to forget it cause we got work to do.
Okay since my father told me to forget it, so the woman is consider to have a lucky day. But not even 1 minute, the stupid woman zigzag and drove away wtf, this already made me feel very displeasure damn it but the worst of the worst you guys wont imagine is that when the moment she zigzag she eventually look at me like she is absolutely right and im the one who cause her failed to brake and bang my car, then she sped off, it made me very angry damn you stupid slut!
But now the weird thing is the moment she bangs the sound is quite loud and when i go and have a look is like normal no scratch no bend no curve nothing happen, is very unexpected. Is it this means that Nissan bumper is well produced?
|
|
|
|
|
|
northiswara
|
May 31 2008, 05:25 PM
|
|
|
QUOTE(Vaiz @ May 31 2008, 04:12 PM) Is a myvi drove by a woman, i dunno what is the road name but is near federal highway. Thursday morning around 8am, the traffic there normally is slow as usual, when the car infront of me stops so i stepped on the brakes and this shit occur "bang"... The sound is quite loud till the driver infront of me look back his rear view mirror and thought i banged his ford ranger, but the traffic was quite jam so i cant double signal and pull aside and my father was sitting beside me and told me to forget it cause we got work to do. Okay since my father told me to forget it, so the woman is consider to have a lucky day. But not even 1 minute, the stupid woman zigzag and drove away wtf, this already made me feel very displeasure damn it but the worst of the worst you guys wont imagine is that when the moment she zigzag she eventually look at me like she is absolutely right and im the one who cause her failed to brake and bang my car, then she sped off, it made me very angry damn you stupid slut! But now the weird thing is the moment she bangs the sound is quite loud and when i go and have a look is like normal no scratch no bend no curve nothing happen, is very unexpected. Is it this means that Nissan bumper is well produced? u know bro? i beg the myvi front bumper punya hook sure patah liao larr. come to the worst the front steel cover also bengkok. my mechanic told me that myvi dont have a steel bar to hook its radiator so the radiator is bolted to the left and right chasis mounting. meaning the mid bumper is not bolt/screw to anything. probably she knows that her front already habis so she stare ar ur pretty car. is ur 3rd brake light working? or the light is dimm liao. better hook up a big 3rd brake light so those car could see u from far far.
Added on May 31, 2008, 5:25 pmvaiz, u are driving N16 kah? This post has been edited by northiswara: May 31 2008, 05:25 PM |
|
|
|
|
|
mangsa_prejudis
|
Jun 1 2008, 04:30 AM
|
Getting Started
|
do we have nismo club stickers brothers?
so jealous see teamcity with numbers..lol
i want number 13
can?
huhuh
|
|
|
|
|
Quote
0.0254sec
0.55
6 queries
GZIP Disabled