Any reason you bought your PGVG at TheFlavourist? I see the price a tad bit high than VaperStuff tho.

both good, i personally feel theflavorist vg a wee bit thicker. ntg major.

ok .. u already edit is it ..

I have a few queries that may have been asked again and again, but please bear with me:
1. I am using a IPV D2 with a kangertech subox mini tank. Any other good tanks to suggest that supports this mod?
2. Where can i non-flavoured juices with just nicotine in it?

Have you try to weight the VG by any chance?

1. Basically, you can use all kinds of tanks with your IPVD2.
2. I don't understand. You want premix VGPG with just nic in it? and you wanna vape just that? or are you trying to find where to buy nic?

1. A buttload to list. I have D2s for daily abuse and RX200.
Ipv d2 has a spring loaded 510 so won't be a problem with basically everything on the market.
2. You can get a premix VG/PG base from The Flavorist. Or just DIY yourself. I too am a fan of flavorless ejuice since swapping 3-4 flavour per day is too much of a hassle.

I find Flavorist geh VG is way sweeter than Vaper Stuff.

And im not sure it was pg or vg that taste a bit funky from vaperstuff..

Nope, but u try buy the smallest quantity from each. Its very nothfcble.

My reply can be used to update the post on the front page since it's the reference point for DIY resources.

Anyone can recommend where can I get syringe, pippette, measuring equipment.

Lelong.my. Pipettes, scale and amber bottles can be easily found there. On mobile so excuse the lack of links.

IMO syringes are outdated plus, messy. Better to just do it by weight. No cleaning up required.

How do you control volume while mixing using weight?
I already have This scale lying around

Is it possible to measure precisely by using pippette to drip the ingredients?

This post has been edited by kykylala: Apr 4 2016, 10:39 AM

Damn, I could've use this kinda scale for my larger batches.

The first thing you need is a scale with the "Tare" function like you already have. Tare allows you to reset the scale back to zero e.g first I put in 20 g of VG, press Tare, scale goes back to zero, add 3g of nic, press Tare, you get the idea.

For flavouring, most will come with a dripper tips or whatever they're called. Super simple and super easy. 5 min of DIY and you'll end up with 100mls of juice.

There's loads of vids on YouTube on how to mix by weight. Still, not a bad idea grabbing a few pippettes.

*Just saw the edit, no. Pipettes don't have the scale in which syringes have. I use pippettes to suck up those pesky juices/flavouring in the bottom of the bottles but for measuring, nope. Bout as good as a blind man in a Mexican standoff

This post has been edited by nekkidgramma: Apr 4 2016, 10:53 AM

That scale has tare function and measures up to 2kg.
Is this how you do mixing by weight? Reddit DIY eJuice guide

Dang, mine only goes up to 500g, but eh I'll live.

There ya go! Waay to much to type down on mobile and I ain't about to spoonfed ya the whole meal. DIY is a constant learning process. Welcome to the sekrit kool kid club, where the rabbit holes never ends.

thanks for the quick reply.

1. I've read somewhere that IPV D2's 75W limit means that a lot of tanks i can't use. For instance, SMOK TFV4 which needs higher wattages and pushing it with the IPV D2 = low battery life and poor performance.
2. Yeah. I am looking for flavorless juices. Basically no coloring/flavoring. Just pure PG/VG mix with nicotine.

That's why I dont recommend 1 battery mods if you wanna go crazy.

I would recommend adding a bit of flavor as VG may cause you to have "wanting to vomit" feeling. Depends on people.

TFV4 don't need higher wattage, it depend how you built it. If battery life is your concern switch to dual batteries mod because single will never last if you tend to firing constantly 30w-40w. Single coils, single battery and using tank I don't think you need to firing up to 30w normally 15w - 25w is max. Unless you tell me you have a beast mod then we will end in different story.

This post has been edited by snake1983: Apr 4 2016, 11:40 AM

I guess its too late now. I have 2 mods with 1 battery. And this is the one with higher wattage.

So any suggestions for any tanks to pair with this?

Like anyone will say, any RTA will do, the main factor of your objective is what? Replacing your subtank to something new? Try get a Uwell Crown or tfv4mini, or griffin ( if you want to have dual coil built) plenty of choice right now in the market those are the hotcake now. It will work fine with your D2. Crown should be a good choice though.

This post has been edited by snake1983: Apr 4 2016, 11:45 AM