Dont you all hink this model of mobo very famous? My friend both have the same board ler..And i also have the same board too..How about you all?What is the reason so famous ler?It's cheap or wat?

coz tht is the best board for soc478, and is the last model

Who told you it's the best?
There's many more socket 478 motherboard that can beat that motherboard easily.

There's:
ASUS P4P800 Deluxe
ASUS P4P800 E Deluxe
ASUS P4C800 Deluxe
ASUS P4C800 E Deluxe

Abit IS7
Abit IC7
Abit IC7 Max 3

These are just a little numbers of the best motherboard for socket 478.

P4P800-X is the best?
I laugh out loud.

This post has been edited by sHawTY: Feb 21 2007, 09:01 PM

haha...that's right bro shawty...

off tpopic: anyway, do anybody here got northwood 2.4-2.8 533fsb with/without HT?? just wanna thread in with my 2.8A....

p4p800x is not the best, but i can say is a good budget 478 mobo. little oc or stock normal system, it is rock stable mobo.

off topic: rainingzero, your 2.8A got prob? i think you change with 2.4-2.8 northwood 533fsb(should be B) doesnt make any different IMO. If you looking for 2.4-2.8C then thats worth more.

EDITED: stupid streamyx make it double post.

This post has been edited by kabukiawie: Feb 21 2007, 10:30 PM

guys, im looking a 2.x s478. does anyone want to sell their proc off?
my fren who got his whole pc stolen want to buy.
if u guys have any, offer me ya.

not like that la.my proc in great condition....my previous P4 2.8A buyer just found his mobo not compatible with prescott. so wanna exchange to northwood. seems his mobo is old one.... so, whoever have can exchange....

to alexandros_18th:
wanna buy my proc??2.8A...

anyway, p4p800-x is budget mobo for oc-ing.unless better than my intel mobo...

LOL P4P800X obviously isint the best..just a decent affordable motherboard that was more readily available last time compared to the other higher end mobos

im using a northwood 2.4B 533FSB w/o HT.

how much r u selling? its 533fsb rite? kinda need a 533fsb coz got a mobo with that spec d..

we already off topic here..anyway, UGPM...

will mod my freezer4 this weekend as i gonna clean up my casing.seems my freezer4 only manage to keep my proc cool while idle, but when full load, it's very hot.maybe bcoz of preshott here... so many dust in my casing right now..

i see, 2.8A is 21 multiplier? hehe...

maybe can put in a higher hfm fan on your freezer4 to cool it down.


@alexandros_18th
make sure that your mobo support prescott. Are you using 865PE??

not sure la...maybe 21multiplier (can check my thread)...

Tested last week, putting fan from diff angel/place.push & pull is the best.what can i get is,in slow mode,my proc can cool down 5'c cooler and with full speed, only cool 6'c (1'c margin there).this i get when full load.the temp while idle not much diff compared without additional fan.will try to use other fan...

so you just put another fan at the other end to pull the air out?? ever mod put 2 same cfm fan push pull on your freezer?

never done that before.afraid it will produce more loud sounds. even if i put 1 fan at full speed, the sound produced annoying....

2.8A Prescott is with multiplier 21
133 x 21 = 2793Mhz

i understand that. Stock HFS even louder when full load.
maybe you can get a silent big fan to blow it. Of course you have to mod to clip on the freezer. Can the freezer fan be removed?

yup, calculated already. dont know hows the oc performance and heat. He got the same stepping as mine.

can't be removed... already find way to stick the fan to the heatsink.just use fine wire...

hmm...... i think there must be some way to removed the faulty fan(like what you mentioned) ever think of putting a larger fan to blow it?? like 120mm fan. Quieter and more airflow. hehe...

for that, he has to do the OCing for you to see loh

haha..don't want la..it's not faulty. seems the fan can't reach full speed like before (2100rpm before, but now only 1600-1800 only... )

i think the biggest fan can fit is 92mm....