tried putting the water decals for the red zeta, and i struggle quite a bit, maybe i need more time to get use to it
up until this day, i still havent put the full decals for red zeta and jesta cannon

Seek sifu advice. Plan to Air Brush Sazabi with Candy Colour Red. My finance minister (aka le wifie) approved my request for Air Brush budget. hehe.

Most guide on internet only mention the step but not mention the colour code if using Mr. Color or Tamiya paint.

Can below paint step achieve it.

All using Mr. Color Thinner
1. Mr Primer Surface 1000
2. Mr Color 2 - Black
3. Mr Color 90 - Shine Silver
4. Mr Color 171 - Fluorescent Red
5. For top coat - Mr Color 46 - Clear

Advice are much appreciated.

What is this Candy colour red?

This Colour.

Sorry, I dont have extra at the moment

All using Mr. Color Thinner - Use leveling thinner.
1. Mr Primer Surface 1000 - Use Black Surfacer.
2. Mr Color 2 - Black - Try use MR Color GX Ueno Black or Gaia Ultimate Black.
3. Mr Color 90 - Shine Silver - This might work but, I think you can get better shine with Gaia Star Bright silver. But, then you will need Gaia Metallic Thinner.
4. Mr Color 171 - Fluorescent Red - I am not sure why this is required. Maybe Use MR Color clear red instead?
5. For top coat - Mr Color 46 - Clear - Use the Mr Color GX - Super Clear III.

Hope that works. Use on a spoon first to test the recommendation

This post has been edited by cacin: May 24 2016, 09:11 AM

Clear color like red or green is hard to spray.
some part may appear too light & some part may appear too dark. (uneven spraying)
the more color u spray, the darker color u get.
bside, sunlight play an importance role...under the sun, the clear red is very shining, but under room light,
it look dark & dull.

so, make sure after a layer of spray, put it under light to see the effect 1st bfore second or third layer apply. (see the photo above, it taking from HIGH- Light exposure.

Noted on the info Sir. Exactly the answer I'm looking for.

Unfortunately, I only have access to Mr. Color or Tamiya paint. They dont sell Gaia paint here.

Any equivalent paint coding from Tamiya paint to replace Gaia paint?


Thank you, Sir.

Was at a water decal tutorial last night, that guy put on those decals like a pro.

Any tricks to strengthen the palm holding weapons if the peg start to wear off or distorted
Referring to those palm with tiny peg

Blutac

Done. Just getting fired up for Macross Delta.

hows the size of the kit? do u feel it will be tedious if want to do some painting to it?

That's real nice

am planning to get the Builder Part 1/100 Hand (Zeon)
however i'm unsure what tamiya spray produce similar color to Sinanju Ova Grey

It is small. If just airbrushing everything in one colour it will be easy to do.

Thank you for the reply, Sir. Any input for colour code in term of Tamiya?

look nice. rm20 ka?

sorry i dont use tamiya. i use mr hobby color or gaia color.

hi anyone know where i can still po for 1/100 (MG) HYAKU SHIKI KAI (P-BANDAI EXCLUSIVE)?
thanks

Yes, around that price. Currently building the vf-31j.

Builders part hand custom doesnt have peg like in MG

This post has been edited by nazrul90: May 24 2016, 01:15 PM