bro u got same case with me, i apply arctic cooling mx-4 last time, no improved at all, its all about room temp.

nowadays newer thermal compound no need burn time. can see the improvement straight away. perhaps u applied too much or too little. how did u do it..?

i used the pea method , i kinda reapply is 3 times yesterday, but no improvement, i tried to spread it out, but tuniq tx-4 is difficult to spread, at the end i use pea method

maybe got restriction with your airflow..? did u change any setup..?

er.. i don think so. i have like 5 casing fans.

still no change in temp..?

nope

damn.. i dont have any more ideas.. hope any sifu here can give a thought

better buy bigger exhaust fan.. And put fans inside in the correct air flow..

Hi guys, im using a sapphire 5770 GC, and the fan is too noise! is there any VGA cooler can recommended? btw...the normal temp is about 56 degree, is that normal?

Try use msi afterburner to reduce the fan speed and ur gpu temp is quite high, try clean the dust of it.

Guys..im using Dell Inspiron 14r..before I reformat my laptop, the fan seems running faster when I play the game..but now the fan not run fast and make my GPU's temperature getting too hot, and it lagging my game..the temp about 90+ degree when the game running..how to fix the fan?

Help here also pls my desktop before is 94 degree after i put thermal paste it become 74 degree @@'' but it hot ... i been clean heatsink also same .
Help thx

disassemble ur laptop
my laptop last time oso like this
the dust covered whole heat sink fins

---

Added on August 24, 2011, 9:24 pmmy problem: i7 2600K Overclocked to 4.8Ghz with Noctua NH D14 (1.32V~1.42V auto voltage)
after running prime95 for half hour the core 1 temp are 51C and core 3 temp is 68C... its normal? so huge difference between core

This post has been edited by NoobHacker: Aug 24 2011, 09:24 PM

4.8GHz for highest 68c is a very good temp, mine 4.8GHz with cm hyper 212+ already around 95c, btw r u from malaysia?

Need help here...Is HWMonitor reading accurate? Because when I first use it and play a game to test and let it record my max temp it show like this

I shocked when i saw the 90 temp++

LOL. Won Liang your brother kah bro?


Anyhow, even the minimum temperature looks quite high, you might wanna check on the HSF seating for your proc.

Even your card is running at high temp. Try benching with real temp and see if you get the same results.

i have one problem. my laptop is like lagging and hanging, and the 2 cores are showing 100% usage.
but somehow, after a few seconds, like 30 sec, it will drop down to 4-6% usage, it is all under idle.

when i start play movie with real player, sometimes it happen again, both cores are 100% and start lagging. the mouse crusor lagging, hanging.

my laptop is acer 4935G with win 7 ultimate. the laptop is just normal setting only, not even for playing games also. i just use it for movie, internet.

after i checked with HWmonitor, it is like 22'C only under idle, and when both cores are 100% and lagging, the temp is still remain same.

however, my laptop did shutdown many many times by itself because of too hot. it is from the left side. during that time, i never check the temp.

i now wanna replace the thermal paste, and now only i start to check the temp with HWmonitor.
Will post the HWmonitor screenshot by tonight.

do anyone can help me on where to apply the thermal paste?
I know the CPU. but after i google , some ppl said the GPU also.
I havent open the laptop, so i not sure how it going to work.[attachmentid=2433581]

This post has been edited by little cutie: Sep 13 2011, 07:39 PM

yes...
of course d14 is a beast...just feel weird with the temperature difference between core 1 and core 4
going to install air conditional using peltier for my casing