It's not NH-U6, it's NC-U6

Is it compatible with the MSI K8N Neo2-FX mobo?

Hey irangan, can I place an order for 1 Noctua NH-U12F?

This post has been edited by Xanaris: Feb 20 2007, 07:50 PM

You mean NC-U6 or NH-12F? If NC-U6, no problem at all as it can be turn 120 degree...very flexible...

If NH-12F, might have clearance problem with PCI-e slot and RAM slot to place it to push the air to rear...you might want to measure the length between PCI-e slot and RAM slot, see got enough 126mm+ or not...and remember to measure from the center of the processor where you can see the screw there... hope you get what I mean...

post u'r mobo pic here.maybe we can help

This is the pic from a site, I emailed this question to Noctua support as well.

edit - yes, am looking for the NH-12F. Not sure how to go about measuring the space though.

This post has been edited by Polaris: Feb 21 2007, 08:08 AM


Attached thumbnail(s)

You can measure the total length from AGP slot (haha...I make a mistake in previous post saying it is PCI-e slot ) to RAM slot as shown in red line in above picture... but this one not accurate as it will place in the center of the pin hole there, so should measure from the pin hole there...

You should measure from pin hole there which is the yellow line in above picture there to RAM slot, and from yellow line there to AGP slot...if both side have more than 63mm, then can fit for push air to rear casing...if push air to PSU, then should be no problem at all...

haha tabik kataro measurement

like kataro said blow to psu should be no prob..but blow to exchaust fan should be tricky..very less space between the proc n agp slot..but looking at it might fit jus the back of vga card have nth higher than the slot should hav no prob laa..jus my rough estimation only

wait for noctua support reply u see how..i email them n get prompt reply

u all ar...

make me wonder my mobo can fit or not..
need to wait until saturday ah.. haih..

8tvt just measure your motherboard then you'll know..irangan still havent confirm the COD time and location...i'm eager to get my heatsink...

by looking at it.. the measurement should be ok for M2N-E..
but afraid it clash with the mobo heatpipe beside cpu socket..

UPDATE 21 February 2007

I am still in my hometown Thus, I cant update you guys that often. Sorry for that.

Anyway, my transporter going to start work tomorrow. I will be back to KL tomorrow and get in touch with them. Soon after that, I will update about the COD time and postage. I will try to get it done by this week.

I believe the goods is in Malaysia already. Sorry again. Happy CNY

Will it fit in here? lol

Its a biostar Tforce 965pt

This post has been edited by Xanaris: Feb 21 2007, 08:20 PM

ur board no prob to fit this noctua.. alot of space around cpu area..

u have to measure the chipset hsf height.don't think will interfere with other parts

Thanks~ lol,i forgot to mention WHAT will actually fit, i meant the Noctua NH-U12F.. Thanks again,lol..

I think the only thing you need to worry is will it have clearance problem with your PSU in case you fix it push air to rear (180 degree) as I can see your processor is very near to the edge... if your casing is big enough, then there should be space between mobo and PSU, then no problem lor...

i have good news to share..For those who's still don't know about this promo items.just go to this link

http://www.noctua.at/main.php?show=promo_order&lng=en

this real..i just get the stuff today.Got 1 x Noctua Metal Case Badge and 1x Noctua Sticker Sheet A4(1 very big Noctua logo.it's 3/4 of A4 size, 1 med size, 2 small and 6 very small sticker.the size just like normal branding sticer like comes with mobo, cpu etc )


** i can provide the picture if u don't believe

sjn hassan,
u got it already? ar tension²...

irangan,
are we got those stuff also?
eager to test the powa..

I personally got that as well.I applied it and it arrives around 3-5days time.The metal badge is of the highest quality available.Dont put too much hope on those stickers as they will come back crumpled due to the bad handling of the postage...Try it...You wont regret with that metal badge...