hehehe...no worries...irangan wil pack it nicely for u guys d somemore i received it in good condition from the bulk v.1 hahahaha...

Err... I think COD is not possible because I am from those ulu ulu place.. hehe.. Dont worry.. I will pack nicely one

So far, noone complained about damaged goods from my 1st Bulk.. Lucky me

---

Added on February 14, 2007, 10:57 pmThanks



This post has been edited by irangan: Feb 14 2007, 10:57 PM

so when can we COD then? update me kay, thanks..
eager to know the performance..

Should be next Saturday.

anyone can kindly upload motherboard with Nc-u6 pic for me to see? How can it turn 120 to suit the board. thx you..


I just received my board today, I take out its chipset heatsink , only one chipset there... you see the picture, it just under the display card,, my display is Palit 256mb 7600gs ddr3 450mhz, i just think can i turn it to suit into, i just wonder if it can do it. coz the componet of display card is near there. Pin is not the problem, coz it has two pins there can fit into, length is around 6.8cm



This post has been edited by kingsthii: Feb 15 2007, 06:04 PM

I dont think any chipset cooler in the market will fit into your mobo. Its design is unique.

irangan i've already bank in the deposit..but dont have camera to take the transaction receipt pic..

This post has been edited by espidiyana: Feb 15 2007, 09:59 PM

I will check on that.. Anyway, thanks for your support. Goods will arrive in no time

Salute to bro irangan.
I told him I need the AS5 urgent and yesterday I just COD,no should say he sent to my place FoC.Very thankful to him willing to do that.
Hes a cute,nice man with glasses, formal apparal, with many GFs
Anyway, couldnt chat with him much, its a very rush COD, but I think we'll sit down n have a drink next time when the HSF comes, dont we?Everyone could really make friends with him.
Thanks alot.


p/s: I personally recommend everyone buy his products due to his excellent service.

HAPPY CNY everyone!!happy holidays

This post has been edited by saoirse: Feb 16 2007, 12:34 AM

Bro..there is/are another pin hole below the heatsink except the hole that used by the black pin shown in the pic??if not, i don't think u can use any after market chipset cooler.unless u mod it by tying up the sink

Bro, do you have anymore NH-U12F to spare ? If yes, I would like to order one. Please PM me. Thanks.

hi kingsthii, NC-U6 will not be able to fit into your NB chipset there as you show in the photo there the chipset is not in the center...if in the center, maybe still can fit in...



As you can see from above picture, the push pin mounting bracket can only be fit in if both length of the pin hole from the center of the chipset is same... for your case, both length of pin hole from center is not the same...rather hard to install any after market cooler...blame to stupid MSI making the NB chipset cooler in that way...

edited to add: btw...you gc is same with mine...

This post has been edited by Kataro: Feb 16 2007, 08:18 PM

kataro,

respect u even draw something out ahaha

kingstii,

ur mobo nb is like the one on intel badexe mobo..long n big..no aftermarket nb cooler can support..if it really hot tie a 40mm fan on it..

Hehe... Its ok.. Just tried my best in handling this bulk

About the gf stuff, shhhhh.... If my current gf saw that, she going to kill me. hahhaa..

Thanks for the compliment.

All the 24 units I ordered already taken. I will inform you if there is anyone pulled out

Yaya... Kataro is very good in drawing.. Respect.

---------------------------------------------------------------------------------------

UPDATE!! 16 February 2007

I just called and checked on the status of the shipment today. Currently, the shipment already reach China, so the Estimated Time of Arrival around early next week. If everything go according to plan, the goods is cleared from customs and ready for collection by the next Friday (23 February 2007) due to CNY holiday. I will try to arrange a COD and sent out the goods on the next Saturday (24 February 2007).

As usual, if you guys have any question please pm or sms me. I will get back to you as soon as possible. But I will start my journey back to my hometown in few hours from now and will be back to KL by next week. So reply will be slow abit since I dont have internet line in my hometown.

That's all for now. Thanks.

Gong Hei Fatt Choi and Happy Holiday to you guys~!!~!

kong hee fat choy to u bro n to other like me waiting our noctua to arrive..safe journey n get many many angpow

yup..it's realy works...thanks akachester for the info i got my Noctua badge n sticker this afternoon..so surprised..i was registered it thru Noctua's website last week it's worth to try...hehehehe...

This post has been edited by jonjon: Feb 16 2007, 11:47 PM

lol..i got it as well in 3 days time.So efficient of Noctua to send the items from Austria.lol..The Metal Badge is of the best quality.So worthit.I think every Noctua user would love to get it.The promotion is still there for those who wants it.Too bad Pos Malaysia handle the items badly and some of the other normal stickers are kinda crumpled..

Thanks for the compliments... haha...I am actually not very good in drawing, that one is draw using MS Paint... just trying to help him in case he don't understand what I mean...

Gong Xi Fa Cai to everybody too...Have a nice Gold Pig Year... Congrats to irangan on the successfully in the 2nd bulk and to all those who order the Noctua Cooler from irangan... Wish you all earn more money...

nice...cant wait to get it.happy chinese year to you all

thanks irangana...cant wait for it...huhuhu