hmmm... so Nc-06 can fit my KN9 Ultra? ^^
http://www.msi.com.tw/program/products/mai...ail.php?UID=731



u see the mounting holes so far away each other, can Nc-06 mounting into it?

This post has been edited by kingsthii: Feb 1 2007, 01:16 PM

Wow, how come the heatsink so long...is it SB & NB together there? If there is two chip set under the heatsink, then I think NC-06 is not an option for you as NC-06 base will not able to cover two chipset...Have you measure the length between the two hole? If I not mistake, the total length of the push-pin mounting bracket can reach is around 90mm, if the mounting hole lenth is between that, then maybe can lor but with the condition it is only 1 chipset there...anyway, this is just my guess, I am not too sure about it...try measure it first...

it wont fit bro..once u see d aso know..the holes are far apart..

even it does fit vga cooler gona b another prob..

yeah my fren oso got prob wit the cooler..huhu he use xbx2 cant fix cz damn huge stock chipset cooler

This post has been edited by mfcm: Feb 2 2007, 12:53 AM

yay....at last can get the cooler.although its after cny but stil worth it.
thanks irangan.

hi.i wondering could NH-U12F fit into my motherboard M2NPV-VM..(the pic of my current pc.picture).without moving the RAM cooler..my casing is ICUTE Middle Tower ATX CASE ZL02-3G-BB.is it easy to install on my AM2 motherboard?(first time).Is it fine to have the pc standing instead lying down after the heatsink is installed.As for the warranty is 6 years for heatsink and fan?Thank you..

If I not mistake, you have ask which HSF can fit in your mobo in Cooling and Hard-modding there right? If you dun want to remove the ram cooler, I think you can take the NH-12, that is without fan one... NH-12F will not fit either vertical or horizontal but NH-12 will fit if fix it horizontal, that is, the fin face to the rear...hope you can understand what I say... PC standing is ok. The warranty is for the fan, not the heatsink.

Hope this help.

@Kataro
I seen u've been pro in measurings n fittings.thumbs up:)

haha no harm to double confirm..so there is no problem if i remove the RAM cooler..won't the CPU temperature increase without the fan blowing the heatsink?when is this bulk closing?thank you

Thanks for your praise... no lar, not pro lar...just try to measure it using ruler and from the spec given only lar...I also not sure whether what I tell is correct or not, just hope can help lor...



Ya, better double confirm than buying the wrong thing... if you dun want to remove the RAM cooler, then the only option is NH-12, of course the temp will be higher, but if your case have great air flow, there will be no problem, only few C higher I think...if you remove the RAM cooler, then you need to measure the length too...you try to measure from the center of the mounting hole till the first ram slot near to CPU, if more than 60mm, then I think is fit lor...

anyway, you might want to see what others will say about it as I might wrong...

This post has been edited by Kataro: Feb 2 2007, 10:43 PM

this heatsink is good enough w/o a fan.
dont worry about closing or wat so ever,irangan has few extra units.

if ram cooler on the way put the fan on the side near to the exchaust..place it sucking out from the sink..gona work as well..is jus better run with fan..out weather is humid kind not recommended to run fanless

u guys mobo can fit in well..my dfi nf3 ultra d i still duno can fit in or not

no i dont think U6 will fit.. your chip is unique

i will try to get it before CNY. waiting for customs confirmation only.

i already replied you in PM.

Thanks for your help, Kataro

should be no problem la. hehe..

You are welcome...forum is to share and help people mah...

@PowerSlide

Your mobo is this?



If yes, then it should be able to fit in 90 degree lor... have enough space... and the NC-U6 also will be fit nicely there as it can rotate 120 degree...

This post has been edited by Kataro: Feb 2 2007, 11:26 PM

hope so can fit..if only can fit by blowing to psu den i cant accept..haha but its gona b close..i expect 1 or 2mm from vga card onlt..dem dem..

U6 can fit into the nb..but my vga cooler aso big arse so space limited again haha

Do a bulk and lost profit? Irangan u shud claim tax from buyers la

Btw any1 want to help me get ACS 5 for rm20 ? U buy as a package tehn i collect from u.

for those who want include acs5 with their orde...then i would like to buy the baki from u lah. Only want to use for 1 time oni. then i will neve open my pc la

You can try to measure it from the middle of the hole, that is the center there where screw residue (hope you understand what I mean ), the width is 126mm, so half of it is 63mm...I think gc there should be ok, but ram there will not fit unless you sacrifice the orange ram slot...will you? but I not sure whether from center to ram there will be less or more than 63mm lar...try figure it out...

ram slot no problem lor..im using the yellow slot..way up there..n ive see alot review..the cooler will go over the ram unless laa using corsair dominator den would be in trouble liao..hav try ukur ukur wid a 120mm fan..everything should jus clear as it should be..

telima kasih bro for ur help hehe

btw bro..snap some pic show show abit laa

This post has been edited by PowerSlide: Feb 3 2007, 03:11 AM

yaya...i also want see this big monster on action.

hi..i just finish measuring my pc...here is the result

RAM cooler ->heatsink middle =4.5cm
Bridge -> to heatsink =3cm
the space for the height from motherboard to side panel =15.5cm
PSU to heatsink =3.5cm
Back Fan -> heatsink is 2.5cm
i'm using ICUTE Middle Tower ATX CASE ZL02-3G-BB casing
here is the pic i took with hp camera..my pc..
do you think it can even fit into my casing?from the measurement is exactly the same...sigh...

This post has been edited by jimmy_none: Feb 3 2007, 10:11 AM