waaa u all pasang sendiri a?
i buy RTR oni

i buy semi assemble.. i just assemble electronics oni..



yesterday i bought this.. front one way and new servo.. have to open bulkhead that i only know what it is yesterday..
any advice from sifu?

i do self assemble cos later nak setting senang i think..
(cheyy.. mcm sifu la pulak..)

i bought this..

This post has been edited by Bangle Ring: Dec 29 2011, 02:42 PM


Attached image(s)

advice.. dont use wd40 to clean one way bearing..

i use video cleaner..

good2.. hehe.. never play at glanmarie?

Xde geng.. Now i try play on carpet.. Advice from sifu at ioji.. But if u want to play at glenmarie dun forget ajak me also..

pasang sendiri baru ada feel kalau dapat berfungsi dengan baik, "fuyohhh syoknya kereta yang saya pasang ni"

ya betol.. now headache mau pasang front one way.. i got new servo as well.. quarter my pay this month gone de..
wanna let go my standard Sanwa servo.. anyone interested can PM me..

open the 4 screws holding your shock tower. pry out your camber turnbuckle on the bulkhead using plier or screwdriver. open the 4 screws that screwed to the lower bulkhead. now your upper bulkhead and differentials should be out easily. there should be 3 screws holding the pulley to the differentials. open it up, screw your pulley to your new one way (remember to check which side the front one way is acting. when you brake, the front should move freely). lubricate your one way and put the cup joint into the one way. put everything back to your car and youre ready to vrommmmm bangg banng banng vrommmm pushhh vrommmm pushhhh

huiyoo.. tererrnya. . sama chassis dgn kayfx ke??

planning to buy this


RM 600

looks ok to me.. wait for sifu..

---

Added on December 31, 2011, 9:09 pmHappy new year LYN drifter
@bangle ring come drift new year..

This post has been edited by kayFX: Dec 31 2011, 09:09 PM

---

Added on December 31, 2011, 9:09 pmHappy new year LYN drifter
@bangle ring come drift new year..

[/quote]

aisey.. still dont have transmitter la..
all sanwa and futaba out of stock everywhere..

This post has been edited by Bangle Ring: Jan 1 2012, 04:38 PM

hi there, im new here..

err, new in RC Drfit car.. =P

gonna buy one of it, any advise what to get?

any brand to recommend? hmmn, budget around RM200-RM400?

thanks.. =)

VANTEX t2 VANTEX 416 VANTEX ota r31

HL 518

these is all i noe or try to find 2nd hand

there's also a clone for HPI E10.
can easily be adjusted to front motor mount,
it is shaft driven though,not really a popular choice for RC drifting machines

yo torobo..

'sup...already get a chassis?

read upper comment