Yea i just retrofitted my headlamps. Keeping fingers crossed that it won't get noticed by the authority. Lolz.

Hahaha actually you are right, I go thru so many road blocks but police dont care also. But at the same time I dont wanna cari pasal with JPJ also.
I actually did it myself. Only hard part is to remove the lense, I use hair drier only,  hahaha. Oh, and be sure to get the sealant ready if you gonna diy. Cz when u reattach the lense, u need to apply new sealant, if not sure moisture will get it. And also, be very careful with the plastics parts of the light assembly, can easily crack.

Aiya I didnt la bro😆. Ok the next time I need to do any adjustments to my lamps, I will make a video on it👍👍

Guys, can I just use any OTC coolant or is there a specific type I need? Tried searching but I can’t seem to find anything conclusive.

From what I’ve read, the Toyota coolant is meant to be good, but thought I’d check first.

The hose connecting to the radiator popped off, draining quite a bit of my coolant (if not all). Not too sure why, and the SC won’t take it any sooner since they’re all full. So need to do my own fix till then. I’d probably need about 2L right? Or 3 to be safe. Or should I just go for the full 4L?

Problem is I can't even see the colour since the reservoir is...well drained of coolant. Lol. I'm planning to go to Ace Hardware to get one while waiting to send in the car for service next week. Gonna get something just to tide it over till then. I've already re-attached and tightened the hose. Not likely for it to occur again (fingers crossed).

After the warranty period is over, I'm never coming back to the SC. I suspect the reason it popped off is because of improper placing/tightening, or the radiator top cover is just of low quality. Things were fine for a few years, and a few months after a product recall, things went hay wire.

Do you mind sharing the shopee link bro?

EDIT: Could this be the coolant you're talking about? I checked on Lazada though since I have very little confidence in shopee

Finally sold it on Motorist.My
got 11k for it - ok la

Done with pugs 
maybe back to Japanese cars now

hi. I need help n suggestion. my pug 408t high pressure pump need to change according to SC. no more warranty, can someone recommend where can repair cheaper or get the spare part . urgently Cox every day travel from Seremban to kl working. that day car breakdown n need  tow it from kl - Seremban high way to workshop.,😭 TQ.

rcz thp 200 is EP6CDTX, thp156 is EP6CDT.

These are damn good. But problem in getting new Peugeot in Malaysia is poor RV. When you get tired of it & want to sell to move on to something better, you are stuck with poor RV!

For this reason, now I only look for used units!

I did for my 3008. So far so good. Sapu corner still stable.

peugeot lose their GTI tag after 205/306gti ...

I changed from PS4 to Goodtrip, not much difference in grip. Of course not much driving during MCO days but now i have driven all the way from KL to Kedah. I just have not been taking those sharp corners at high speed nowadays.

If you're looking for cheap and good, this could be it. I for one for rm295, about more than a year ago.

Aiya dont say like that la, Im running stage 2

Hi gaiss,

My car is showing ABS faulty error again. I was trying to use ELM32 OBD II to check the ABS faulty vame from which wheel. But i can't find any info from the diagnostic tool. Anyone know whether we can get the ABS faulty info from OBD II?

From the scan, i only found oxygen sensor faulty. Need to replace this or i can actually ignore it?

Hi Peugeot bro,

Just bump into a Dongfeng Peugeot 1.6/2.0L wheel alignment specification sheet  that shows preferred Front Right hand side camber angle being more negative than that of Left hand side (aka unbalanced camber angles at Front), which imo isn't quite suitable for our Malaysian road crowns.

Anyone here has a typical wheel alignment spec sheet (or a computer screenshot or printout from a local wheel alignment machine) for 'local' or imported Peugeot (of whatever models) to share indicating similarities or dissimilar ......

or any Peugeot owner here having experiencing vehicle veering left when driving straight ahead with factory specification esp when new?

I'm curious and btw I'm not a Peugeot owner.

I checked hfrom shoppee, there are variety of Launch X431. Would those below RM100 works?

Elm32 can only read engine related.

For abs/esp and transmission you will need something better. Launch X431 should work. I'm using a actia at the moment. Run both diagbox and pp2000.

For O2 sensor it should show you which is faulty, either upstream or downsteam.  Pretty easy to replace.

The so called "fake" actia selling in shopee is useable, with some feature "locked" due to the feature/software is locked to Peugeot service center personnel. You will still able to do testing, read code, pair keys, and many more. Some features such as programming, repair manual, service box are not available unless you have authorize service personnel ID and password.

Yes what you will need is a laptop with USB port that run in any 32 bits Windows. Installation CD is normally included in the "fake" actia. Those actia is selling really cheap now since when China seller flooded shopee and lazada. Good for DIYer like us indeed.