Outline ·
[ Standard ] ·
Linear+
Proton Prevé V23, Livin la vida loca
|
ben3003
|
Oct 1 2015, 08:51 AM
|
|
QUOTE(SportyHandling @ Oct 1 2015, 08:46 AM) I've only got the traction lights lit up once on my car when accelerating from standstill. The ground is full of sand and there is little to no traction, and the tyres are just gliding against the sand with the car not moving forward, and that point the traction lights came up. I have never managed to activated the traction lights in all my cars when driving around the bends or corners. Guess my driving is not wild enough to engage the traction or ESP control, whatever it is. ohh ok, with my 3ST, i feel the transfer or power from engine to tire to the road is much better, becos it launches the car much faster, more responsive compare to BAX2. Meaning to say i tend to over pecut when at roundabout, where BAX2 Traction control kicks in way earlier that you will lose power becos car take over so u get control. If no TC, maybe with BAX2 car might be spinning already.
|
|
|
|
|
|
ben3003
|
Oct 8 2015, 07:40 AM
|
|
yes it is possible, when the tire become botak or old oledi, it will give out alot of sound, especially a BAX2 which is not known for quietness.
|
|
|
|
|
|
ben3003
|
Oct 13 2015, 11:51 AM
|
|
QUOTE(plumberly @ Oct 11 2015, 10:16 AM) Speaking my mind: AA I was driving my son to school on a 2 lanes road. There were 4 cars: 1,2 infront and 3, 4 behind the front 2 cars. I was #4. Car 3 squeezed into my lane, cut into his original lane overtaking car 1. He did it at quite a high speed and without using signal lights. You bet, I was cursing this guy. I don't care how good is he in driving, he should not do such an aggressive overtaking. One question came to mind then. Are the professional F1 drivers good/safe drivers on the road or are they the speedy, careless type on the road? BB Noted a hr+min data on the front panel (press the button at the end of the wiper stick a few times). Initially I thought it tells me what is the approximate driving time I have after topping up the petrol. Realised later is the total driving time since I got the car. It is only 50+ hrs. Cannot be, I have used the car for 14 months now. That works out to be 0.1 hr or 6 mins per day. Cannot be. I use the car for at least 30 mins per day. Maybe disconnecting the battery will reset that? I sent in my car for a checkup in Aug and they checked the battery. So starting from Aug, it works out to be 50/60*60 = 50 mins /day. That is more reasonable. Cheerio. tat timer is not for u to know how long have u been driving since u got the car. It is for u to know how long it takes for u to drive from point A to point B. U can reset it urself it will go back to zero when u hold the button long enuf.
|
|
|
|
|
|
ben3003
|
Jan 26 2016, 03:48 PM
|
|
wat happened to ur reverse sensor?
This post has been edited by ben3003: Jan 26 2016, 03:49 PM
|
|
|
|
|
|
ben3003
|
Apr 22 2016, 12:36 PM
|
|
anyone got recalled for the wat window hemming thingy? the service advisor told me is like change the glue or wat i dunno.. can share details if anyone got?
|
|
|
|
|
|
ben3003
|
Apr 22 2016, 07:10 PM
|
|
oh now i know.. is the black part of the car door.. the one at B pillar.
|
|
|
|
|
|
ben3003
|
Sep 3 2017, 04:57 PM
|
|
QUOTE(oto1202 @ Sep 3 2017, 03:45 PM) LED 36W H7 4800 LUMEN 6000K can direct fit into our headlamp?
|
|
|
|
|
|
ben3003
|
Sep 4 2017, 09:03 AM
|
|
QUOTE(oto1202 @ Sep 3 2017, 08:10 PM) The big heatsink still can fit after we put on the cap? Or no more cap?
|
|
|
|
|
|
ben3003
|
Sep 4 2017, 10:05 AM
|
|
QUOTE(:3mushy:3 @ Sep 4 2017, 09:21 AM) Definitely no cap, the heatsink is huge. will there be any prob? like water ingress or short circuit?
|
|
|
|
|
|
ben3003
|
Sep 4 2017, 02:22 PM
|
|
QUOTE(oto1202 @ Sep 4 2017, 12:51 PM) looks good  can share link?
|
|
|
|
|
|
ben3003
|
Sep 5 2017, 10:10 AM
|
|
QUOTE(oto1202 @ Sep 5 2017, 09:31 AM) thanks! how is the installation? easy ka?
|
|
|
|
|
|
ben3003
|
Sep 5 2017, 04:56 PM
|
|
QUOTE(ChuanHong @ Sep 5 2017, 04:13 PM) can use new generation of LED bulb.. without fan.. just come with heat sink.. much compact than C6.. [attachmentid=9100918] for smartphone holder, i got this from lazada, mainly from china.. Item quite tough and durable.. of course it is block air cond vent a bit but doesnt matter to me.. most important it's durable and really steady.. can adjust portrait or landscape mode 360 degree turn around.. i dont want it blocked my reverse camera will do.. aircond no prob.. cause in the end i use auto mode to blow the air. i dont like windshield holder.. there are some magnetic holder is great as well but depend on which phone u are using.. [attachmentid=9100867] can link the one u shared? i saw oto1202 installation also can use back ori dust cap no cutting needed.
|
|
|
|
|
|
ben3003
|
Sep 5 2017, 06:57 PM
|
|
QUOTE(ChuanHong @ Sep 5 2017, 05:41 PM) I did used c6 that he using. Died out 3 pieces out of 4.. lol.. so now changing to this one. Good cut off and brightness as well.. ohh can share link?😊
|
|
|
|
|
|
ben3003
|
Sep 5 2017, 09:28 PM
|
|
QUOTE(ChuanHong @ Sep 5 2017, 08:34 PM) https://shopee.com.my/autohome.my/123071625I did tested out many kind of bulbs already.. halogen, hid, led.. for the best output, hid definitely. But I worried get fine.. lol Halogen, diamond vision, white vision, osram NDB all are good but not white that u want . Hid cutoff nice, as same as halogen cutoff.. most importantly u need to know how to align it.. LED instant light up.. but heat always is something manufacturer want to solve it. Fan, copper pipe, fanless heatsink, different type of LED tech to reduce heat.. actually quite sufficient for nowadays LED tech, just our Preve headlamp is covered by dust cap.. which heat trapped inside. Air flow not that great.. Honda Car like accord use h11.. damn good. Heatsink all exposed outside headlamp and got airflows.. Ohh.. if HID 4300k or 5000k shud be ok right? Our projector headlamp no need modification also good cutoff? If hid wat brand u recommend? Wanna try LED now haha cos already using diamond vision, kinda ok but very dark at night..
|
|
|
|
|
|
ben3003
|
Sep 19 2017, 02:44 PM
|
|
QUOTE(laytiong @ Sep 6 2017, 10:19 PM) I'm using Osram HIDs which are of 4300K color. No kacau at roadblocks due to it is not pure white. Very slight yellow. Rarely need high beam anymore, cutoff is good, no glare, very even spread of light. Hi beams for me are Osram Nightbreaker which I aim high enough to ensure I get noticed if I flash them. LED's don't interest me cause due to the chip placement it is not the same as bulb filament. It may alter the beam pattern. HID retrofits has closer tolerance to bulb filament placement although it is not 100% the same. bro, what kind of osram hid can u intro? is it a direct fit into our headlamp? my philips diamond vision after 1 year 1 side the light macam become gelap dah.. This post has been edited by ben3003: Sep 19 2017, 02:44 PM
|
|
|
|
|
|
ben3003
|
Sep 19 2017, 03:58 PM
|
|
anyone can share which wipe u guys use that will not hit the side when wiping at full speed? i use PIAA hybrid type wiper no matter how adjust also kena hit.. stupid proton engineer wan to be different then come out with this bullshit .5 inch standard.. wat the fuk no brain can jump sea die.
|
|
|
|
|
|
ben3003
|
Sep 19 2017, 04:03 PM
|
|
QUOTE(:3mushy:3 @ Sep 19 2017, 04:02 PM) Those flexible or hybrid wipers would hit the A pillar, I've tried adjusting it many times. Only the skeleton type won't hit the pillar at wiper arm's stock position. so no choice must use the inferior skeleton type?  if 22 inch also will hit?
|
|
|
|
|
|
ben3003
|
Sep 20 2017, 10:45 AM
|
|
QUOTE(laytiong @ Sep 19 2017, 10:10 PM) i use this http://www.lazada.com.my/osram-xenarc-xeno...0.0.Q7sruV&ff=1high beams are this http://www.lazada.com.my/original-osram-ni...0.0.rWni9q&ff=1scout around for best prices if you are keen, the links above shows you what i have installed. direct fit H7 socket. the HID seems to be tough to install myself..
|
|
|
|
|
|
ben3003
|
Sep 20 2017, 10:47 AM
|
|
QUOTE(:3mushy:3 @ Sep 20 2017, 09:51 AM) During the first experience I thought it was something way serious, like bent wheel, absorber or even the suspension problem. Turned out to be the damn wiper hitting the A pillar. yeah.. so stupid design.. now have to use the fugly skeleton wiper, no classy at all.
|
|
|
|
|
|
ben3003
|
Oct 3 2017, 03:04 PM
|
|
anyone from kk know which workshop know how to do the drl fix on our headlamp?
|
|
|
|
|