Got need to ask your seller, they don't hard sell it. I only top up additional RM240 to get indoor and outdoor covered for a total of 5 years.

I would assume that there would be a slight reduction as the compressor uses less time on full load as the room cools down faster. Am using on average 61-71kWh a week for a 1.5hp inverter.

Panasonic App calculates for me. Must have network adaptor to be able to do so.


This post has been edited by aurion: Mar 27 2019, 09:31 PM

1) That function will only happen after accumulative usage of 24hours. when you turn the air conditioner off, (power light off) nanoe-g remains blue. it will run for 30 mins in fan mode.

2) shoud be any dealer.

Am using it on mine A/C.

XU has Nanoe-X and NanoeG, where as U, only Nanoe-G.

Am using CS/CU-XU13UKH basically the R32 Model before CS/XU-13VKH came out. Both come with Nanoe-G and Nanoe-X just that from brochures in comparison I noticed that the VKH has lower lower power input than UKH (min260-max1,200) vs (min260-max1,180). Other than that I cannot find other differences between these 2 models with the addition of the price hike in XU-13VKH. For CS-U13VKH, by looking at specs it is equivalent to R410 CS-S13TKH, main difference being the R32 Refrigerant. Attached is the features comparison between the XU and U. Hope this helps you.

Also for Nanoe Technology equipped Inverters, they do have the "In Filter Deactivation" feature which only operates after an accumulative operation in cooling/dry mode of approx 24hrs. Upon switching off the air-conditioner, it will run in low fan speed in fan mode for 30 minutes with flaps slightly open. After 30 minutes, flaps will close and Nano Tech will then eliminates bacteria/virus trapped in the filter.



This post has been edited by aurion: May 29 2019, 07:12 PM

Can say so, cos I bought my XU13UKH for RM1,850. now VKH 2k+. XU=X Premium Inverter, U=Premium Inverter. UKH now has been replaced by VKH slightly about a year after UKH was launched.

This post has been edited by aurion: May 30 2019, 03:42 AM

I don't see what is not good about many model launches at one go. It gives consumers more choices to choose from according to their budget.

Spareparts stop after 5 years? I can still find spareparts from them for my model with MKH (2011 Inverter) - still running well

I did have issues with Panasonic at first, on my CS/CU-S13TKH at first. Noisy air swing, keeps ticking when moving up and down. They did resolve it by replacing drain pan assembly (comes with air swing motors). Upon repair I moved it to my office, and bought the CS/CU-XU13-UKH to replace it.

So far after a full year of useage no problems so far. Gets its job done by cooling down the temperature quite fast. Using it with the optional network adaptor as well.

Just installed the Panasonic XU-24VKH and got the free network adaptor. Replacing a 15 year old R22 General air conditioner.

Did not change piping due to it being concealed.. Just did purging. Hose used for previous unit was already thick, just that one of the pipe diameter I cannot remember Liquid or Gas needed to be brazed with a smaller copper pipe due to the previous spec air con pipe being larger in diameter.

RM3,520

Here you go. I use the nanoe button for my fan mode.


2.5hp.

Back here in Sabah.

1) There still are 5 Star Rated Inverters if you refering to Panasonic, Sky Series R32, X-Premium Inverter R32, Premium Inverter R32, Standard R32 Inverters have them. R410a Inverts range from 3 star to 5 star
2)ST changed their rating system based on CSPF now. For the same CS/CU-PS9TKH-1 Inverter 3 star and current useage is 1021kw/h. CSPF rating came in somewhere in March this year.
3) Go download the latest air conditioner brochure from Panasonic Malaysia, the energy labels are in there.

Panasonic CS-U13VKH. Their aftersales here in Sabah is beyond my expectations. They respond fast to complains and go all way out to assist in claim. Recently my air conditioner threw out a H67 error code, they ordered the replacement part immediately. Another case went for another unit where the front panel was not fit on one side, they came checked, ordered the new front panel for the indoor unit. Arrived within 3 days to Sabah.

For my bedroom it does it's job. Sends the entire unit to run af maximum output and fan speed, with both main and sub flaps angled towards the floor. Once set temperature is achieved, unit will reduce output and fan speed with the main and sub flaps pointing straight forward.

Could be due to improper installation sometimes the panels are not in place properly it will make a rattling sound. Happened to my XU-13. I went and shake the outdoor unit abit and noise was gone.