devolt them bro...

either run at 7v or 5v. i have a CM 80mm fan on top there oso.... and i run it at 7v

no....he doesnt own the Lian Li PC-007.

both myself and fo33il own something similar to the 007 but a unique and rare in malaysia version of the 007

we are part of an elite group of case owners...

CLICK HERE TO FIND OUT MORE

This post has been edited by mADmAN: May 5 2007, 03:47 AM

not similar la...theyre the exact same case its just a rebadge. only diff with urs is like u said the side panel and also the GT sticker in front

anyway, hows the vibrations on ur HDD cage? both me n Doom (ex-owner of fo33il's case) had problems with cage vibrating (noisy!) but we found a cheap way of solving it.

u having the same problems with urs?

This post has been edited by mADmAN: May 5 2007, 04:07 PM

MUAHAHHAHAHAHAHAHHAHAHAHAHAHAHAHAHAHHAAHAHHAHAHAHAH

read the thread i posted of the GT case...its in there somewhere

the 80mm Vizos are loud....but the 120mm are alright..not too loud and not too quiet IMHO

i have 2 Vizos running in my rig

check out the logo on the front of the case





GT BABEH!!! WAHAHAHAHHAHAHAHAHHAHAA

no need to be confused ler... im guessing GT are the OEM makers of the Lian Li 007 chassis.

my GT is the same exact case as the PC-007. Lian Li site states it as the PC-007 (OEM)

This post has been edited by mADmAN: May 6 2007, 08:31 AM

they have optional parts la

they even sell the side panel in windowed and non-windowed version. ATE has them. only thing is stock availability

yes it is...trust me...can see the pix of the bezel in the GT thread i posted earlier (or can just click the case in my sig)


u sure its the fans?? the stock fans might be a lil noisy...at least that was the case with me n doom when we got our OEM PC007B.

also, the HDD cage of ur case has vibration issues. its the same exact cage as the PC007. solution for the HDD cage can also be found in the thread i mentioned to serez (linked in my sig)

i have an 80mm fan on my 007.. cables ok only...no kacau oso...

internals are exactly the same as the G7 except for the HDD cage.

i dunno how u guys do ur cable management... but my fan isnt blocked by any cables

heres a pic...



i had a cable tie base stuck to the alu plate on the inside and tie up all my PSU cables there. keeping neat and out of the way

EDIT: heres a pic and example of cable tie base....mine is the one with the square in the centre



the rest of my cable management can be seen HERE

This post has been edited by mADmAN: May 11 2007, 01:14 PM

eh?? no la....its still the alu silver wat

initially when i first bought it yes...but then decided against it... the silver alu is already damn nice.. and i rarely play or even see the internals to even care anymore

havent done anything related to case mod in a very long time

one of the first things i did to my case was change put the "holy" grill and replaced it with a normal wire grill for the back and a sponge filter grill for the front

geez...look like my plastic clips will wear even faster considering the fact that i have to clean out the damn filter once a week!

u actually removed the filter??? imagine how often u have to clean ur internals without the filter

heres mine after on 24/7 for exactly 7 days with the fan @ 5v


and as for alu case absorbing heat better...its just a myth (read: BULL) the case DOES NOT do anything for temps coz it does not come in direct contact with components.

This post has been edited by mADmAN: May 23 2007, 03:05 PM

i think he meant this finger guard... aka fan grills



of course it does...by quite abit too. but the flow is still acceptable for me.. another thing to note...that when the this particular filter is installed u get a dead zone in the centre...more than usual actually...hard to explain...refer pic...



because of this...i had to put my HDD on the top of the HDD cage in the PC-007 OEM to make sure it gets some air going over it. bottom of the cage will also get some air flow..but i used the top la

This post has been edited by mADmAN: May 23 2007, 04:35 PM

yeah its mine....but that pic was taken when the case was still brand spanking new...ive removed it and replaced it with a fingerguard (now using one on each side of the fan)....the mesh thingy has only seen like 3-5 minutes of airflow

then u should get this from uglyvamp...



its good in filtering and doesnt block out so much air flow...im using it for my fan on my XP-120.

reason why im not using it on my front is because my room has a lot of dust and i need something thats easier to remove and clean. if i use the one in the pic i have to unscrew it every time i wanna clean it off

i think i saw them in 120mm when i went his shop about 2 months ago...i think la.... not sure.....mebbe stock run out liao.

but i can confirm that the 120mm exists coz i myself am using 1 for my 120mm fan on my xp-120 like i said in my previous post..i bought 2 of them from uglyvamp's shop in SLS.

made from some sort of metal net...something like a sieve (that thing usually used to 'filter' tepung wan)...

nope..no store in malaysia (yet)...he does his malaysian sales via his website or his subforum in price & dealers guide section.