Yup this one. Supposed to be 30 or 32 but I keep adding no problem. Sometimes it will tell you it’s full already but you look again it is paired 😅

This post has been edited by idoblu: Jan 6 2019, 11:27 AM

actually i like this method more, less intrusive


https://www.youtube.com/watch?v=J_zAhXF_i7I...imVlkRzV6jpGZwz


This post has been edited by lwl_80: Jan 7 2019, 08:12 AM

You don't have to worry about losing connections too much
Cause all your switches is a little Zigbee signal repeater

Okies thanks a lot! My stuff arriving end month can't wait

Hi Sifues,

I would like to try for the sonoff t1 uk 3 gang 1 switch model. But, when i open the old switch, it do not have neutral wired. But beside it, it do have aircon on\off switch.

Question : Can myself pull the neutral wired from that aircon on\off switch ?

And use the connector to split for that neutral wire , can ?

Depends on house wiring. You can just try. If it works, it works. Otherwise, it will trip the MCB. Then probably you have 3 phase with 3 separate RCD breaker. Then you need to find the N from the same phase.

Hey guys,

i'm looking to get samsung's smartthings hub v3. I can't seem to decide whether US or UK version is better (because of Zwave). Can someone share some views?

Can the UK Zwave work with china's Zwave products?

Appreciate the help guys.... thanks a bunch

You can refer the frequency on Wiki

https://en.wikipedia.org/wiki/Z-Wave

Another reference

https://products.z-wavealliance.org/regions/6/categories

This post has been edited by Zot: Jan 11 2019, 03:31 PM

Thanks for the reply but i've read the frequency stated. I just need confirmation on using a UK hub with China sensors is working. Cheers..

Yes, China & UK is using same frequency.

this is actually great.
but this has 1 problem, u can say close the gate even when the door is close, and it will open. vice versa.

This post has been edited by areankim: Jan 11 2019, 06:03 PM

Thanks boss. But my house single phase wor, so is it eventually all the neutral shared the same ? sorry, i am noob

Yes. Can tap N from any point

Thanks boss. I will try it

true, that's why i think no mater which method you use, it would be good to have a cctv cam pointing at the gate to be safe

So which china sensor devices r u using with the ST?

You mean bulbs, right?
From Yeelight box, electricity cost is about $1.20 per year if used 3hrs/day at $0.10/kWh rate.
Lifespan is 22.8 years if based on usage of 3hrs/day.

Need RGB colour and effect, and also to control by app/GH/Alexa then use Yeelight. Well, they also have white bulbs too.
Philips Hue is expensive shit.

Damn expensive. Yeelight don't need a hub to connect with. Much easier.

I’m using the Aqara Tunable White LED bulbs. Can off/on remotely or via automation eg: a motion/lux sensor. Can adjust colour temp and brightness. Timer off/on. I think that’s about it. Cost wise RM39 or thereabouts for a 9 or 10w bulb. Needs a hub.

I don’t use RGB Yeelights but I have the Koogeek RGB bulb. Haven’t really used it yet. Definitely a novelty but maybe I can find a good use for the colours. Doesn’t need a hub but expensive. Around RM90.

I use them with Apple HomeKit.

This post has been edited by soonwai: Jan 14 2019, 04:18 PM