bro,bla blik melaka?im gng back on 27th.. b4 tu nk cari cooler dlu...hehe
5-5-4-5-11-2T for ddr1xxx? aku gune 5-4-4-5-11-2T tuk ddr 1050 wif 2.1vdimm..

going back 24.. have to go to penang.. ader lawatan sket.. 2.0v for ddr2-1100.. kalo nak set 5-5-4-5-11 ke 5-4-4-5-11.. restart dah.. interested with only low vdimm when use for daily..huhu.. sem ko start ble ha?? bpe ari bulan??

sem aku start 31st dec..mlas tul...
aku dah try ddr1100,dgn 2.17vdimm.stable at 5-4-4-5-11-2T..tweak2,dapat la 25.781scnds spi 1m

This post has been edited by alive88: Dec 18 2007, 10:14 PM

orite la 2.. aku guna single stick.. so cant catch up with u.. only if i use more tight timing n tweak reserve value.. n can catch up wit u.. for normal use.. very hard..

why use single stick?whers the other one?

aku mana ader pakai dual channel.. interested for single stick mow..haha

heya guys, wat should i do if i got this


1 minute 17sec

sorry for the pic wrong rendering

This post has been edited by syazwanreno: Dec 20 2007, 12:48 AM

lol....looks....dangerous to me....

how to look man.,.upload proper pic plz..

btw can i OC Amd x2 4000+ to 3GHz?

if can, give me the formula.....

the formula..skill+luck+money..
list down ur spec and let us see

AMD x2 4000+
Aeneon 1GB DDR800 x2
Biostar T770 A2+
SAPPHIRE HD 3870
Acbel E2 510
200GB HDD

ok..for me,tis good enuf...but i dun know whether u can achieve 3ghz or not..mine b4 can reach 2.909ghz..

make ur ram timing to 400,increase ur vcore to 1.4,sure u can achieve 2.8 no sweat...later,try to increase ur fsb,adn check ur sysytem whether its stable or not, and if not stable, add vcore..make sure the temp is below 60(or touch the hsf),as brisby cannot read the temp correctly...
as u ss above,i think its because of ur vcore is not enuf

thx,

btw wat HT volt for?

i dont think u need to increase ur ht volt..its for ur hyper transport..haa..make sure ur lower ur ht multiplier to 3x

not all 4000+ can achieve 3.0ghz..if urs can, u consider luck..
u may ask cyberloner, he already test many 3600+ and 4000+, the result, only some of them stable at 3.0ghz.the rest, barely survive...
good luck..

just sell that 4000+
get 5000+ black edition... (price also nice now 3xx only)
pump vcore and change multiplier to 16x
bump 3200mhz stable overclock......
=)

by the way.. that oc prime msg means u are over the cpu limit..... if rounding not equal 0.5 what ever 0.4 ... this msg maybe go away with more vcore....

This post has been edited by cyberloner: Dec 22 2007, 01:39 AM

black edition maybe next year

maybe i just oc to 2.73 GHZ like alive88 did....

hey alive88, wat the teknik do you use?

btw cyberloner, wat is the max vcore can i put to my proc b4 if 'boom'?

and also it is true that "as brisby cannot read the temp correctly" ???



This post has been edited by syazwanreno: Dec 22 2007, 09:45 AM

got some probe defect at G1. dunno this also applied to G2 or not...

should have the improvement.. so it doesnt name that G2