ok..for me,tis good enuf...but i dun know whether u can achieve 3ghz or not..mine b4 can reach 2.909ghz..

make ur ram timing to 400,increase ur vcore to 1.4,sure u can achieve 2.8 no sweat...later,try to increase ur fsb,adn check ur sysytem whether its stable or not, and if not stable, add vcore..make sure the temp is below 60(or touch the hsf),as brisby cannot read the temp correctly...
as u ss above,i think its because of ur vcore is not enuf

just sell that 4000+
get 5000+ black edition... (price also nice now 3xx only) 
pump vcore and change multiplier to 16x
bump 3200mhz stable overclock......
=)

by the way.. that oc prime msg means u are over the cpu limit..... if rounding not equal 0.5 what ever 0.4 ... this msg maybe go away with more vcore....

2.0v? i'm going to try soon , seriously 
stay tune

what's so special with this 1? 
3.2GHz only wor 

probably you dunno our own malaysian's results 

check this out:  http://forum.lowyat.net/topic/321443 ( super pi 1M database)

and show u something , this's mine 

[attachmentid=366154]

CPU-Z validation: http://valid.x86-secret.com/show_oc.php?id=266568

my technic?
hard to say..but here is my setting..
fsb 260x10.5= 2.73
ram divider,800=cpu/6
2.73ghz/6=455.7(ram speed=960)timing 5-4-4-12-21-2t at 2.1v(xms2 2gb cl5 ram)
ht link=1302..(260x5)

note=vcore 1.35,vdimm2.1

this is January project laaaa
another good way to celeb 2008.....4g@2.0v
heheh

ht link is shown like this either 1x until 5x or 200mhz until 1ghz