Welcome Guest ( Log In | Register )

8 Pages < 1 2 3 4 > » Bottom

Outline · [ Standard ] · Linear+

 AMD (Malaysia) Official Thread

views
     
llk
post Apr 22 2017, 09:30 PM

Look at all my stars!!
*******
Senior Member
4,158 posts

Joined: Jan 2003
From: KL
QUOTE((Andy) @ Apr 22 2017, 09:28 PM)
Hehe I think is 1.244v
*
Your is Ryzen 5 which variant?
llk
post Apr 22 2017, 09:35 PM

Look at all my stars!!
*******
Senior Member
4,158 posts

Joined: Jan 2003
From: KL
QUOTE(goldfries @ Apr 22 2017, 09:32 PM)
OK I tested mine

Ryzen Master report = Motherboard LED report
HW Monitor report = AIDA64

biggrin.gif

It's weird though, on idle they were about 2c part, then on load they were about 10c apart then now they're about 5c apart.
*
Yaya, exactly happened on mine too, when full load the different so significant, i don't know which is correct? rclxub.gif

QUOTE((Andy) @ Apr 22 2017, 09:34 PM)
ryzen 5 1600
*
Not sure have you run some stability test or not, if u did so then 1.244v is quite low running at 3.9ghz, could be golden chip drool.gif
Btw what DDR4 are you using? Mind to share what speed its running?

This post has been edited by llk: Apr 22 2017, 09:39 PM
llk
post Apr 22 2017, 09:48 PM

Look at all my stars!!
*******
Senior Member
4,158 posts

Joined: Jan 2003
From: KL
QUOTE((Andy) @ Apr 22 2017, 09:28 PM)
Hehe I think is 1.244v[attachmentid=8758185]
*
I think that is not the correct voltage reading, you should install CPU-Z

QUOTE(goldfries @ Apr 22 2017, 09:42 PM)
Latest ..........


*board LED report same as Ryzen Master*
*
Then i think the temp reading from Ryzen master should be correct

This post has been edited by llk: Apr 22 2017, 09:50 PM


Attached thumbnail(s)
Attached Image
llk
post Apr 22 2017, 10:02 PM

Look at all my stars!!
*******
Senior Member
4,158 posts

Joined: Jan 2003
From: KL
QUOTE(goldfries @ Apr 22 2017, 09:51 PM)
Should go with that, because other software we don't know how good they are but the Ryzen Master and LED from my experience is most accurate, but the rest aren't far off actually.

I guess it's just a matter when they read.

My stress test is still running, all showing 62 already.
*
Ok roger that. Btw my cheapo asrock k4 board's debug led don't have function to show cpu temp.
llk
post Apr 22 2017, 10:22 PM

Look at all my stars!!
*******
Senior Member
4,158 posts

Joined: Jan 2003
From: KL
QUOTE(eDwanD @ Apr 22 2017, 10:13 PM)
Yup i'm using the latest version
llk
post Apr 22 2017, 10:58 PM

Look at all my stars!!
*******
Senior Member
4,158 posts

Joined: Jan 2003
From: KL
QUOTE((Andy) @ Apr 22 2017, 10:49 PM)
[attachmentid=8758621]  tongue.gif 1.237volt
*
Not bad ya rclxms.gif , but wonder why the cpuz software shown the weird voltage, if really 1.6v sure fried the cpu already doh.gif
llk
post Apr 22 2017, 11:46 PM

Look at all my stars!!
*******
Senior Member
4,158 posts

Joined: Jan 2003
From: KL
QUOTE((Andy) @ Apr 22 2017, 11:18 PM)
blink.gif weird leh core voltage shows 2.464 but i see temp are below 50c which is cool
biggrin.gif lucky 1st batch user
*
In order to check whether your pc is stable or not you should try to run aida64 stability test, just my2cents
llk
post Apr 22 2017, 11:56 PM

Look at all my stars!!
*******
Senior Member
4,158 posts

Joined: Jan 2003
From: KL
QUOTE((Andy) @ Apr 22 2017, 11:55 PM)
sifu ,aida 64 need to run how long ensure test complete?
*
Usually i let it run at least 30mins, but u need to keep monitoring the temp, if it shootup really high then need to stop
llk
post Apr 23 2017, 12:26 AM

Look at all my stars!!
*******
Senior Member
4,158 posts

Joined: Jan 2003
From: KL
QUOTE((Andy) @ Apr 23 2017, 12:16 AM)
ok,manage run 20mins den screen turn black tongue.gif
time to increase voltage perhaps
*
Slowly increase & keep monitor temperature, good luck biggrin.gif
llk
post Apr 23 2017, 11:52 AM

Look at all my stars!!
*******
Senior Member
4,158 posts

Joined: Jan 2003
From: KL
QUOTE(Someonesim @ Apr 23 2017, 11:21 AM)
goldfries's method are more recommended, because you will want higher voltage that's stable all time, than lower voltage that might cause issue when you didnt expected.
Starting voltage can always refer other experienced overclocker's setting.
*
4.0g at 1.45v the temp just horrible when doing stability test even though im on watercooled, the cpu itself shootup to 80+ degree Celsius
llk
post Apr 25 2017, 11:01 AM

Look at all my stars!!
*******
Senior Member
4,158 posts

Joined: Jan 2003
From: KL
QUOTE(Lurker @ Apr 25 2017, 10:47 AM)
Thts kinda insane, water cool still can get 80°C
Sure warm up the whole casing
*
My casing is very big therefore still ok, 1.45v consume more than 250watt alone
llk
post Apr 25 2017, 11:35 AM

Look at all my stars!!
*******
Senior Member
4,158 posts

Joined: Jan 2003
From: KL
QUOTE(Someonesim @ Apr 25 2017, 11:27 AM)
1.45V  sweat.gif 
WC using compatible AM4 socket already ? what brand ?
*
I search thru online 1.45v for 1700 to run at 4GHz quite common actually, there are few considered as golden chip can run below 1.4v but very rare.
My Bitspower block do not have AM4 socket so i bought cheaper option which is China brand called Barrow, according to review its performance is on par with EK since Barrow copycat from EK biggrin.gif
Btw i saw MSI arctic board available in lelong, maybe you can check with the seller.

This post has been edited by llk: Apr 25 2017, 11:38 AM


Attached thumbnail(s)
Attached Image
llk
post Apr 25 2017, 12:37 PM

Look at all my stars!!
*******
Senior Member
4,158 posts

Joined: Jan 2003
From: KL
QUOTE(skylinelover @ Apr 25 2017, 12:15 PM)
Haha nice laugh.gif rclxms.gif
*
Thanks boss, all cheap items laugh.gif
llk
post Apr 25 2017, 01:46 PM

Look at all my stars!!
*******
Senior Member
4,158 posts

Joined: Jan 2003
From: KL
QUOTE(Someonesim @ Apr 25 2017, 01:39 PM)
Havent boot up my 1700, I really want that number '4' in my spec  biggrin.gif 
Ya, that lelong one been on my watch as well.
*
I drop it to 3.9GHz voltage 1.312 for my daily driver.
llk
post Apr 25 2017, 03:17 PM

Look at all my stars!!
*******
Senior Member
4,158 posts

Joined: Jan 2003
From: KL
QUOTE(eDwanD @ Apr 25 2017, 01:58 PM)
At the final result, u failed to have 1.4ghz with 1.4v or below? XD Nice rig u have @@ i hope can go to water cooling in future if got more budget =w=
*
4.0ghz that you are talking about right? And yes my chip can't do 4.0ghz below 1.4v sad.gif
llk
post Apr 25 2017, 04:00 PM

Look at all my stars!!
*******
Senior Member
4,158 posts

Joined: Jan 2003
From: KL
QUOTE(eDwanD @ Apr 25 2017, 03:29 PM)
Oops @@ but u done 3.9ghz with maybe not the best but really sweet spot for 1.312v, but over 1.45v is too much different for 100mhz @@

I'm gonna get an used gtx1060 tomolo, my time for build up my rig for test oc =w=

I'm googled and found out that stock cooler is run nice within 1.35v, more than that will over 80'c under stress test @@

If cant get a nice oc under 1.35v, i might grab an used unit of AIO water cooling or grab a air cooler from garage sales .

Hope, i get a nice silicon lottery XD
*
Good luck,and yea ryzen cpu temperature nice below 1.35v, more than that will consume lot of power which generate lot of heat. I have a friend who his 1700 and asus crosahair mobo died after he put his pc overnight, he not even oc yet, very strange
llk
post Apr 25 2017, 04:23 PM

Look at all my stars!!
*******
Senior Member
4,158 posts

Joined: Jan 2003
From: KL
QUOTE(eDwanD @ Apr 25 2017, 04:13 PM)
died .... sound scary.... i m type who of shutdown my desktop, even current laptop running 24/7 @@
*
I'm not sure what he did but he did condemn asus mobo nowadays qc so bad, haha
llk
post Apr 25 2017, 05:05 PM

Look at all my stars!!
*******
Senior Member
4,158 posts

Joined: Jan 2003
From: KL
QUOTE(goldfries @ Apr 25 2017, 04:38 PM)
3.8 - 3.9 is sweet spot. Going 4Ghz feels good but too much power on vcore.

The thing about Ryzen is that even if it registers 80c the heatsink still feels cool to the touch.
*
No wonder i check my coolant temperature it is around 30+ degree celcius, but the cpu temperature already 60over @@
llk
post Apr 25 2017, 05:53 PM

Look at all my stars!!
*******
Senior Member
4,158 posts

Joined: Jan 2003
From: KL
QUOTE(Someonesim @ Apr 25 2017, 05:26 PM)
Died as in bricked ? Both processor and mobo ?  sweat.gif
*
He told me the pc can't boot anymore, so just send for RMA for both items.
llk
post Apr 25 2017, 07:25 PM

Look at all my stars!!
*******
Senior Member
4,158 posts

Joined: Jan 2003
From: KL
QUOTE(Ebony & Ivory @ Apr 25 2017, 07:16 PM)
After all ryzen is a new platform, so there are still many improvement and optimisation can be done with it.

If simply prefer high clock speed and oc, better go with Intel.
*
Its ok, i have an intel 5930k which is oc to 4.5ghz

8 Pages < 1 2 3 4 > » Top
 

Change to:
| Lo-Fi Version
0.2446sec    1.16    7 queries    GZIP Disabled
Time is now: 20th December 2025 - 08:53 PM