Welcome Guest ( Log In | Register )

235 Pages « < 178 179 180 181 182 > » Bottom

Outline · [ Standard ] · Linear+

Streamyx Streamyx 4Mbps Club V6

views
     
celciuz
post Mar 6 2017, 08:31 PM

10k Club
********
All Stars
14,037 posts

Joined: Nov 2004
QUOTE(GOPI56 @ Mar 6 2017, 08:23 PM)
Some setting changes is needed.
*
I googled around, seems like changing from ADSL2+ to ADSL2 and ANNEX A would help?

Attached Image

Or should I go the other GMT thingy?
GOPI56
post Mar 6 2017, 08:48 PM

Regular
******
Senior Member
1,495 posts

Joined: Dec 2012
QUOTE(celciuz @ Mar 6 2017, 09:31 PM)
I googled around, seems like changing from ADSL2+ to ADSL2 and ANNEX A would help?

Attached Image

Or should I go the other GMT thingy?
*
What settings options do you have? Can you screenshot it and share it here.
celciuz
post Mar 6 2017, 08:50 PM

10k Club
********
All Stars
14,037 posts

Joined: Nov 2004
QUOTE(GOPI56 @ Mar 6 2017, 08:48 PM)
What settings options do you have? Can you screenshot it and share it here.
*
Here you go, I tried the GMT... but seems like my SNR dropped further :S.

Attached Image Attached Image
GOPI56
post Mar 6 2017, 09:05 PM

Regular
******
Senior Member
1,495 posts

Joined: Dec 2012
QUOTE(celciuz @ Mar 6 2017, 09:50 PM)
Here you go, I tried the GMT... but seems like my SNR dropped further :S.

Attached Image Attached Image
*
For settings:
a. For DSL Modulation choose Auto Sync-Up
b. In ANNEX Mode choose ANNEX A/I/J/L/M
c. Enable ESNP-Enhanced Sudden Noise Protection.

You may view this guide to know more:

https://www.asus.com/support/faq/1015709/
celciuz
post Mar 6 2017, 09:11 PM

10k Club
********
All Stars
14,037 posts

Joined: Nov 2004
QUOTE(GOPI56 @ Mar 6 2017, 09:05 PM)
For settings:
a. For DSL Modulation choose Auto Sync-Up
b. In ANNEX Mode choose ANNEX A/I/J/L/M
c. Enable ESNP-Enhanced Sudden Noise Protection.

You may view this guide to know more:

https://www.asus.com/support/faq/1015709/
*
sweat.gif

Problem now is I'm having random disconnects with the default settings...
GOPI56
post Mar 6 2017, 09:16 PM

Regular
******
Senior Member
1,495 posts

Joined: Dec 2012
QUOTE(celciuz @ Mar 6 2017, 10:11 PM)
sweat.gif

Problem now is I'm having random disconnects with the default settings...
*
Oh ok, change back to settings on which the line was stable. Maybe that is the best SNR that you can get. Have you tried changing the ADSL splitter with the splitter that was provided by Asus.

This post has been edited by GOPI56: Mar 6 2017, 09:17 PM
juzmafia
post Mar 6 2017, 09:25 PM

On my way
****
Junior Member
562 posts

Joined: Oct 2012
From: Out of the world...

QUOTE(celciuz @ Mar 6 2017, 08:21 PM)
Just upgraded to Asus DSL-N12U D1 from the Streamyx DSL-2640B, only thing i noticed now is I'm getting random disconnect from the DSL line...

My DSL stats are as attached... should I be changing any settings?
*
Ur dsl status is good...
Try direct connection w/o splitter..
Ur old modem still good or had the same prob?
celciuz
post Mar 6 2017, 10:07 PM

10k Club
********
All Stars
14,037 posts

Joined: Nov 2004
QUOTE(juzmafia @ Mar 6 2017, 09:25 PM)
Ur dsl status is good...
Try direct connection w/o splitter..
Ur old modem still good or had the same prob?
*
I'm doing direct connection actually, what I noticed is the internet icon turns off, then comes back on... weird? I'm trying D.GMT now instead.
juzmafia
post Mar 6 2017, 10:10 PM

On my way
****
Junior Member
562 posts

Joined: Oct 2012
From: Out of the world...

QUOTE(celciuz @ Mar 6 2017, 10:07 PM)
I'm doing direct connection actually, what I noticed is the internet icon turns off, then comes back on... weird? I'm trying D.GMT now instead.
*
Emm..everthing looks good..
How bout dsl light, does it turn of wen internet light off?
I think better to cal TM to reset port..
celciuz
post Mar 6 2017, 10:13 PM

10k Club
********
All Stars
14,037 posts

Joined: Nov 2004
QUOTE(juzmafia @ Mar 6 2017, 10:10 PM)
Emm..everthing looks good..
How bout dsl light, does it turn of wen internet light off?
I think better to cal TM to reset port..
*
Didn't notice the DSL light blinking tho, only noticed the internet turned off.. cause surfing halfway then suddenly takes long time to load.
TSblacktubi
post Mar 6 2017, 10:25 PM

-
Group Icon
Elite
8,420 posts

Joined: Jul 2008

QUOTE(celciuz @ Mar 6 2017, 10:13 PM)
Didn't notice the DSL light blinking tho, only noticed the internet turned off.. cause surfing halfway then suddenly takes long time to load.
*
Your ADSL is stable but internet connection is dropped? How frequent is it?

Check your PPPOE configurations, make sure it is configured to be always on.
celciuz
post Mar 7 2017, 07:27 AM

10k Club
********
All Stars
14,037 posts

Joined: Nov 2004
QUOTE(blacktubi @ Mar 6 2017, 10:25 PM)
Your ADSL is stable but internet connection is dropped? How frequent is it?

Check your PPPOE configurations, make sure it is configured to be always on.
*
PPPOE is set to on, no disconnect. Not too sure about the frequency, but I installed the modem router on Friday night, probably 3 times since then. Currently monitoring on the DSL up time.
lpsoldier007
post Mar 7 2017, 10:41 AM

Casual
***
Junior Member
306 posts

Joined: May 2009
My parents' house shows ADSL 2+ Annex M, max speed around 27Mbps. (now 4Mbps Streamyx)

But my own house shows ADSL 2+ Annex A, max speed around 11Mbps only. (4Mbps Streamyx also)
skylinelover
post Mar 7 2017, 01:48 PM

Future Crypto Player😄👊Driver Abamsado😎😎
********
All Stars
11,265 posts

Joined: Jul 2005
Haha drop by

Cant wait 2 depart 4 meg after moving out 4 good in 1 year time laugh.gif doh.gif

celciuz
post Mar 7 2017, 09:23 PM

10k Club
********
All Stars
14,037 posts

Joined: Nov 2004
QUOTE(blacktubi @ Mar 6 2017, 10:25 PM)
Your ADSL is stable but internet connection is dropped? How frequent is it?

Check your PPPOE configurations, make sure it is configured to be always on.
*
Was looking my logs, disconnected twice in the morning ohmy.gif.

Looked something like this.

DSL link down? Hmm..

2017-03-07 09:36:00 kernel: Link State: PVC_0 PPPoE down.
2017-03-07 09:36:00 kernel: Link State: DSL link down.
2017-03-07 09:36:02 WAN Connection: Fail to connect with some issues.
2017-03-07 09:36:03 stop_nat_rules: apply the redirect_rules!
2017-03-07 09:36:08 WAN Connection: Wan link down.
2017-03-07 09:36:13 kernel: Detect DSL status:0x08 into polling mode!!
2017-03-07 09:36:30 kernel: Detect DSL status:0x20 into INT mode!!
2017-03-07 09:36:30 kernel: Link State: DSL link up.
2017-03-07 09:36:33 WAN Connection: Wan link up.
2017-03-07 09:36:39 syslog: Terminating on signal 15
2017-03-07 09:36:39 syslog: Connect time 110.4 minutes.
2017-03-07 09:36:39 syslog: Sent 1562404 bytes, received 14830085 bytes.
2017-03-07 09:36:39 syslog: LCP down.
2017-03-07 09:36:39 syslog: Connection terminated.
2017-03-07 09:36:39 syslog: LCP down.
2017-03-07 09:36:39 RFC1483/2684 bridge: Interface "nas0" created sucessfully
2017-03-07 09:36:39 RFC1483/2684 bridge: Communicating over ATM 0.0.35, encapsulation: LLC
2017-03-07 09:36:39 RFC1483/2684 bridge: Interface configured
2017-03-07 09:36:39 RFC1483/2684 bridge: RFC 1483/2684 bridge daemon started
2017-03-07 09:36:45 WAN Connection: Fail to connect with some issues.
2017-03-07 09:36:53 syslog: PPP session is 15815
2017-03-07 09:36:53 syslog: Connected to 10:1b:54:83:5d:57 via interface nas0
2017-03-07 09:36:53 syslog: Using interface ppp0
2017-03-07 09:36:53 syslog: Connect: ppp0 <--> nas0
2017-03-07 09:36:56 syslog: Remote message: Authentication success,Welcome!
2017-03-07 09:36:56 syslog: PAP authentication succeeded
2017-03-07 09:36:56 syslog: peer from calling number 10:1B:54:83:5D:57 authorized
2017-03-07 09:36:56 syslog: local IP address 60.48.46.187
2017-03-07 09:36:56 syslog: remote IP address 60.48.46.190
2017-03-07 09:36:56 syslog: primary DNS address 202.188.18.188
2017-03-07 09:36:56 syslog: secondary DNS address 1.9.1.9
TSblacktubi
post Mar 7 2017, 10:03 PM

-
Group Icon
Elite
8,420 posts

Joined: Jul 2008

QUOTE(celciuz @ Mar 7 2017, 09:23 PM)
Was looking my logs, disconnected twice in the morning ohmy.gif.

Looked something like this.

DSL link down? Hmm..

» Click to show Spoiler - click again to hide... «

*
Disconnection is normal with ADSL. Was it really that stable with your previous modem?
afiq10
post Mar 7 2017, 10:12 PM

Casual
***
Junior Member
394 posts

Joined: Jan 2014
QUOTE(celciuz @ Mar 7 2017, 09:23 PM)
Was looking my logs, disconnected twice in the morning ohmy.gif.

Looked something like this.

DSL link down? Hmm..

2017-03-07 09:36:00 kernel: Link State: PVC_0 PPPoE down.
2017-03-07 09:36:00 kernel: Link State: DSL link down.
2017-03-07 09:36:02 WAN Connection: Fail to connect with some issues.
2017-03-07 09:36:03 stop_nat_rules: apply the redirect_rules!
2017-03-07 09:36:08 WAN Connection: Wan link down.
2017-03-07 09:36:13 kernel: Detect DSL status:0x08 into polling mode!!
2017-03-07 09:36:30 kernel: Detect DSL status:0x20 into INT mode!!
2017-03-07 09:36:30 kernel: Link State: DSL link up.
2017-03-07 09:36:33 WAN Connection: Wan link up.
2017-03-07 09:36:39 syslog: Terminating on signal 15
2017-03-07 09:36:39 syslog: Connect time 110.4 minutes.
2017-03-07 09:36:39 syslog: Sent 1562404 bytes, received 14830085 bytes.
2017-03-07 09:36:39 syslog: LCP down.
2017-03-07 09:36:39 syslog: Connection terminated.
2017-03-07 09:36:39 syslog: LCP down.
2017-03-07 09:36:39 RFC1483/2684 bridge: Interface "nas0" created sucessfully
2017-03-07 09:36:39 RFC1483/2684 bridge: Communicating over ATM 0.0.35, encapsulation: LLC
2017-03-07 09:36:39 RFC1483/2684 bridge: Interface configured
2017-03-07 09:36:39 RFC1483/2684 bridge: RFC 1483/2684 bridge daemon started
2017-03-07 09:36:45 WAN Connection: Fail to connect with some issues.
2017-03-07 09:36:53 syslog: PPP session is 15815
2017-03-07 09:36:53 syslog: Connected to 10:1b:54:83:5d:57 via interface nas0
2017-03-07 09:36:53 syslog: Using interface ppp0
2017-03-07 09:36:53 syslog: Connect: ppp0 <--> nas0
2017-03-07 09:36:56 syslog: Remote message: Authentication success,Welcome!
2017-03-07 09:36:56 syslog: PAP authentication succeeded
2017-03-07 09:36:56 syslog: peer from calling number 10:1B:54:83:5D:57 authorized
2017-03-07 09:36:56 syslog: local  IP address 60.48.46.187
2017-03-07 09:36:56 syslog: remote IP address 60.48.46.190
2017-03-07 09:36:56 syslog: primary  DNS address 202.188.18.188
2017-03-07 09:36:56 syslog: secondary DNS address 1.9.1.9
*
Your line status SNR Margin/Line Attenatuation is very good..

you should NOT be facing random disconnection at all..

try restoring the modem to default factory setting .. or maybe your modem is spoilt?
celciuz
post Mar 8 2017, 12:46 AM

10k Club
********
All Stars
14,037 posts

Joined: Nov 2004
QUOTE(blacktubi @ Mar 7 2017, 10:03 PM)
Disconnection is normal with ADSL. Was it really that stable with your previous modem?
*
Hmm, I recalled having the same ip for almost a week, forced to restart due to power failure at home actually. The ip normally doesn't change, which is why I find it weird how come this new Asus DSL-N12U randomly disconnects... I'm trying the ADSL2 instead of ADSL2+ now. See how it goes perhaps.

QUOTE(afiq10 @ Mar 7 2017, 10:12 PM)
Your line status SNR Margin/Line Attenatuation is very good..

you should NOT be facing random disconnection at all..

try restoring the modem to default factory setting .. or maybe your modem is spoilt?
*
Mmm... just got this modem on Friday actually. Gotta monitor further I guess =/
juzmafia
post Mar 8 2017, 12:55 PM

On my way
****
Junior Member
562 posts

Joined: Oct 2012
From: Out of the world...

QUOTE(celciuz @ Mar 8 2017, 12:46 AM)
Hmm, I recalled having the same ip for almost a week, forced to restart due to power failure at home actually. The ip normally doesn't change, which is why I find it weird how come this new Asus DSL-N12U randomly disconnects... I'm trying the ADSL2 instead of ADSL2+ now. See how it goes perhaps.
Mmm... just got this modem on Friday actually. Gotta monitor further I guess =/
*
Is your modem on latest firmware --> 1.1.2.2_17
Try factory reset..
celciuz
post Mar 8 2017, 01:19 PM

10k Club
********
All Stars
14,037 posts

Joined: Nov 2004
QUOTE(juzmafia @ Mar 8 2017, 12:55 PM)
Is your modem on latest firmware -->  1.1.2.2_17
Try factory reset..
*
Yes, I'm on the latest firmware btw. And it is kinda buggy though, when I assign static ip via the web browser as soon as I click the +, my modem would proceed to update but then I would be locked out from 192.168.1.1 until I restart the modem. When I get back in, it is already added.

I tried with the new firmware + reset to factory setting doesn't seem to help. I'm trying out ADSL2 ANNEX A instead now since I'm only on 4 Mb anyways.

235 Pages « < 178 179 180 181 182 > » Top
 

Change to:
| Lo-Fi Version
0.0397sec    0.33    6 queries    GZIP Disabled
Time is now: 17th December 2025 - 10:10 PM