ok im good x

x
i need to test each card of it limit :   so i need to just disable cross and test single gpu limit ? or i need physical remove gpu and test it oc....... 

My method was remained one card for testing, not sure disable the crossfire can do that or not.

What's your final core voltage for the tri-x when you run it at 1200mhz?

okay then confirm, so i need to physically remove and test each single one of gpu oc limit.. thank you

okay then confirm, so i need to physically remove and test each single one of gpu oc limit.. thank you

I'm actually using full custom watercooling setup, but i never try to exceed 200mv, since one of my Sapphire Tri-x has low default voltage so i need to pump more than 100mv in order to get it free of artifacts at Core 1200mhz/Ram 1500mhz

okay then confirm, so i need to physically remove and test each single one of gpu oc limit.. thank you

in my experienced, i dont even oc it by disabling xfire.. just simply increase the core and mem using afterburner and run benchmark to check any instability.. just make sure you turn on synchronize for both gpu in the afterburner/trixx setting.. logically if one the gpus become unstable with the current oc, benchmark will show artifacts.. does not matter even though your other gpu is stable at that oc, it will still shows some artifact if the other one is unstable.. so just increase voltage or lower down core/mem until no artifact appear and you are good to go.. im sure you already know its useless to run different core/mem setting in xfire mode  ..

Price drop for R9 is happening

http://fudzilla.com/home/item/35946-amd-dr...x-hawaii-prices

There are news about the 290/290X price revisions.

http://www.fudzilla.com/home/item/35946-am...x-hawaii-prices

When can we enjoy the price reduction in malaysia?

AMD's temporary solution to the 970/980.
Price cut for 290 and 290x can already be seen on Newegg/Amazon. You can get the aftermarket 290x for $400 and 290 for $300 now, with Never Settle bundle of course.

http://www.newegg.com/Product/Product.aspx...2-079-_-Product
http://www.newegg.com/Product/Product.aspx...5-499-_-Product
http://www.newegg.com/Product/Product.aspx...5-505-_-Product
http://www.newegg.com/Product/Product.aspx...1-569-_-Product
http://www.newegg.com/Product/Product.aspx...2-080-_-Product

Good time to sell your 290s if u're planning to jump ship before the price cut reach our shore.

Yup.

After conversion,$299 R9 290 is RM975.79.. Doubt that it will be selling at that price here though,probably around 1000-1100.

Anyway,can't stop laughing at that GIF..

Rm 1k is about rm 300 drop from current prices. This would mean the 280x will be around RM 700 to RM800 range? 

If R9 280X around RM700-800,then R9 270X would be lower..
R9 280X is at $269 IINM.Which is about 8xx.

I believe the 280x will be phased out soon to make way for the 285x

Any news on 285X,though?

No idea, you need to ask AMDmy. 

AMD Catalyst™ 14.9.1 Beta Driver for Windows®

Due to a small number of isolated usability issues in last week's AMD Catalyst™ 14.9 driver that were reported by end users, we are providing an updated driver that addresses those usability issues. If you are not facing any problems we recommend you continue to use the latest AMD Catalyst™ 14.9 driver.

Highlights of AMD Catalyst™ 14.9.1 Windows Beta Driver
Resolved Issues
Driver installation randomly crashes or hangs
Intermittent black screen or BSOD on reboot after driver installation
[406933]: CCC intermittently crashes with error popup message
[406904]: Random hang or BSOD when launching Battlefield 4 in quad Crossfire™
[406906]: Random hang or BSOD when enabling or disabling quad Crossfire™
[406905]: Intermittent hang when launching Sniper Elite 3 with quad Crossfire™

Sauce: AMD Catalyst 14.9.1 BETA (14.301.1004.0 October 4)

Nope. Heck the release date was mentioned by September, but still no news off it

http://wccftech.com/amd-radeon-r9-285x-ton...-gb-gddr5-vram/

Heh, 380X / 390X is where the action will be, 20nm + HBM + GCN 2.0 /gg
Nvidia will release GM200 too.