So? Kam or not jek? I really curious how u, ur waifu & your kid looks like

Ayam quite familiar with Melaka tourist spot geh, coz eberiyear I oso will stay in Aldy hotel in Bandar Hilir with my family to celebrate my dotter's beefday. Other than that, special occassion such as friends from oversea come visit KL, I'll drive them straight to Melaka coz more museum to spend their time. This year exceptional, coz dotter in Primary school ady, so can't skip class go travel, ma celebrated in KL lor. Manatau, still ended up myself go there whack laksa cendol wt jiu

Can la. Bring to u during TT lar.





This is the favorite Bamboo Hut bistro at Aldy Hotel. The big breakfast is so big that it worth the room already. Technically, the room is free because of the free big breakfast for 2. That salt/pepper duo is my dotter's favorite. We come back here to snap photo on very April(except this year) . So, probably we're going to do it in May meetup.

Yesterday wasn't holiday, neither Monday is, but yesterday packed until 1 hour only managed to squeeze in Bdr Hilir I usually will purposely take leave, get children to skip school to Melaka geh. Weekend.... Sorry la I don't wanna drive around in Melaka over the weekend due to flooded with too many kiasu-kiasi fellas

Marehsia is NOT

So, jiu kambing along anot jek

Ipoh guy rite? Pls go tapau salted bake chiken plis

So, ayam gonna gib u a list of stuff that a EXEC version has, whereas SV doesn't. I will add in the estimated cost of UPGRADE

1) 14" Alloy wheel
sv) 13" rim kompang(buy from tayar shop, trade in the original 13" immediately after got out of factory would cost RM400)

2) Quality coil floor mat with Plotong Thundercat logo.
sv) Ultra thin fabric floor mat(buy original from Plotong cost RM120, or go Tesco buy without logo would cost RM29)

3) Boot lamp
sv) Tarak, not even wire(Add boot lamp at accessories shop RM50, DIY less than RM20, prolly looks better than EXEC stock lamps)

4) Muffler tip
sv) Tarak (go five gold shop buy 6" diameter x 3" long stainless steel pipe for RM8. Drill a hole and screw it on. Walauweh! +100horse powah! If normal tip go add at exhaust shop, RM80)

5) ABS
sv) Tarak (To add up, will cost roughly around 4k, also depending whether the mech is competitive to do so)

6) Boot handler, door open lever came with paint that matches body color
sv) Black original plastic color (Get it painted at shops would cost RM100, DIY RM5 for all 4 doors and rear boot handler)

7) Kosong on the left side of the boot lid
sv) Got a huge SV logo on the left side of the boot lid (scrape it off if you don't want. Before that, come forum make an offer, god knows you get to sell it for a price if you're lucky)

8) CD player with USB/Auxiliary input
sv) Tarak (The ranjiao Clarion if you wish to buy from Plotong, it would cost you RM1500. Better go for after market, probably below RM300 ady got good quality)

9) Steering column audio control
sv) Tarak (but if upgraded after market below RM300 player ady got remote control, if die die want original steering control, can lar + RM250 from Plotong part)

10) Cushion fabric seat
sv) Some said it's thinner, I don't know I find them the same (go to used car dealer find an EXEC version, offer tauke a price to exchange your NEW seat with the old EXEC seat, may be like RM200)

11) Stock tint that can bubble in a year or 2 later
sv) Go ask for DaBestOne for RM180 nia

You decide la. If you ask me, SV is a damn good deal as I get to choose what I need to add in. But the only drawback is always about the ABS, as original factory fitted ABS are always the best balanced system and well tested in controlled environment.

You get light weight, not even 1 air bag was in the car
Your boot handler got paint ady, SV dun hab
You don't need to bear with the SV logo people laugh at

I paint the whole bonnet & grill(sarung)

kenjilew said, aku berak sendiri!

Seriously, according to n3w & what I saw wt my own eyes, the unavailability of resources, lack of latest technologies, living standard, u may stand a better chance to not only earn a living, but to excel or get rich by doing MCM(minor car mods) The cheaper fellas, tayar botak until looks like racing slick tyres liao, kena paku jor still force the tauke to patch it. Tauke sei kenot still don't care, sendiri go take the rubber stick and patch it. Ended up, yes no doubt fixed the leak jor, but that paku site due to thread wall too thin and possibly steel belt layer patah ady, so bengkaked Ended up, die die change. Now only the interesting part begun, the tauke offer a set of 195/55R15 Faken ZE522 to him(3 years old, bout 50% thread left) for RM80/piece (WTF?! That's my tyres!) The fella refused to take. Ended up tauke dunno from where squeeze out 1 piece of extremely old and worn down tyre. Slap it on that rim, put soap water see no leak, then collected RM50 Seriously, I don't see any difference in terms of thread left on the tire compare to the earlier kena paku tyre. Why in the hell he rather pay RM50 for 1 almost botak tyre? Rather than RM80 for 2 pieces of 50% thread tyre?! And yes, n3w the tauke later use that RM50 collected and paid to you liao U know the punk head guy drove a Mazda Bongo with extreme tyre condition kena paku still wanna patch that fella rite It's not that what worthwhile deal you can find for customer, it's how cheap can you go. Despite cheap, but the profit is amazing.

Another thing is, richfag n3w don't even care the 2 pieces of my 195/50R15 Faken ZE522 so new until like fresh out from factory, he still traded all 4 tyres up for merely RM150 In return, tauke sold him a set of Cibaistone Kurize for RM700 RM700 I could have got myself a set of ATR Sport with balance to pump petrol liao

?

No ECU doesn't have a built in standby batter, however there is an EEPROM(Electrically Erasable Programmable Read Only Memory). As the name of the ROM, it required ELECTRIC to erase data. Hence, regardless how you remove battery, your CEL will still be in place if there's a hardware faulty in your car until you sent it to Plotong to erase that code. Part of the data are stored inside this part of the memory, which required preprogrammed function to overwrite/delete data, and or manually overwrite via PDT. To put this in a live situation, when everybody talking about manually wash throttlebody and ended up CEL(lhwj as example). The reason behind is, ECU already programmed with the last known throttle position. Hence, during the cleaning process if the butterfly being pushed away and not aligned back to its last known position, chances are after plonk back(regardless you got remove battery or not), ECU will use the last known parameter to calibrate on the throttle position. So, in your case, the last known position is not vary from the last known parameter, whereas the less lucky forum member from Northern region had to leave his beloved SE in SC for 1 whole week.

Just for your information, I had a very precious opportunity to witness 1 crazy event back in my older days(many-many years ago). A case where involved with an Alfa Twinspark, after the car had some issue with its ignition, magician managed to order parts from Italy and had it fixed. However, the problem is the CEL wouldn't go away. Ended up had to get some professional to come over to shop and fix it. They first call to Italy, then they put an acoustic coupler into the serial port of the CAR, dial up modem. Over the phone, they transmit some signal, then we hear engine starts, proceed with some misfiring fart, then vary RPM multiple times within 2~3krpm, back to idle. It's like there's a hidden robot fiddling with the car we saw Finally, engine off and they call back to the professionals, spoke some funny language and collected RM2.6k professional fee Client were granted for 3 months warranty from the date of service purchased. Consider the price they pay, the amount of technology they spent on the car, I dare not to say worth it, but it really open my eyes.

FYI, acoustic coupler is this

Buy PC stuff, format reinstalled virused PC also can go dyno run for free ar

Serial port, 720kb floppy disk

Mahihi plonk 1 piece in my car, then I bring down to jiu during TT

Void gebox woranti, due to rim too big goyang the gebox too marj, so gebox hailut.com.my. After which, injin woranti pon kantoi bcoz gebox goyang make crankshaft unbalance, hence entire injin oso hailat.com.my

Oh! 180kb ar. Korek ar, Prince Of Persia, 2 diskettes. Too bad lar, my monitor is only a black & white. RAM I upgraded kao kao ady, 512kb :hehe:Want Tandy 16 VGA with kaler monitor, but mom refused, say sked I watch porn wor Stuck with that machine since 1986 dunno until 1991 only changed to 386 40mhz. Till then, u know lar. Dial up modem 14.4kbps, everynight after ebibodi slept jor wait 1 hour jz to see 1 naked foto Sometimes waited some 20minutes, almost reach tetek time sardenly somebody call in Ci9lan7xin ady wanna slam the fon on the floor and step9lan7 it

My com dun hab hard disk Can only use DOS diskette boot up, then change disk to pray geim

Mine can pray xenon2 but black&white lar On PC speaker



This post has been edited by davidke20: Apr 22 2014, 05:49 PM

Mahihi CPS engine is pre 2010 version rite, so the can bus is also same batch of protocol rike BLM/Gen2 rite

8088 is my 1st com Hard drive got, 12MB but it cost the computer itself so din bai My 386 time seldom pray game jor, mostly use to do programming and download naked stuff