please pm price for ford fiesta twintip include installation. please give possible suggestions, better if its stainless steel.

cheers.

Hi bro, provide me more info of the sound, power and design that you required coz' everyone has different preference

Call me for faster response or text my phone also can

---

Added on February 23, 2012, 9:42 pmHey bro,sorry didn't remember your nickname, which one is you?

Thank you for the great feedback and continuous support. We are happy to make you happy!

---

Added on February 23, 2012, 9:45 pmHi bro, one side or two sides? Hope to have you contacting me via phone, thanks.

This post has been edited by kweng84: Feb 23 2012, 09:45 PM

Hey mate, do you have the exhaust for this Honda Edix, the 6-seater mini MPV tuned by Wald in Malaysia?

For reference, here's a picture of how the Honda Edix looks like:

i heard that viva should use 1.6" midbox than 2.0" right?
so wat is the price?

bro, do u have any shop/runner at kuching sarawak? i want extractor 3-1 for my kenari,

---

Added on February 24, 2012, 10:59 pmand do u have any 3-2-1 extractor? my car is auto btw

This post has been edited by orang90: Feb 24 2012, 10:59 PM

one side

just finished my new exhaust setup at kweng (wai heng kaki exhaust serdang HQ) not too long ago. fully stainless steel, 4-2-1 extractor, 1.6" piping, 2" oval mid bullet, sflow muffler

My old extractor and it's cover, rusted to hell now, and notice the carbon on the cover? It's leaking D: http://twitpic.com/8oeeis
Old middle silencer versus the new bigger, more quiet center bullet http://twitpic.com/8oef6f
New s flow muffler, bigger and much more heavier than the old muffler http://twitpic.com/8oefij
Here's the old muffler, a lot lighter than the new s flow I'm getting. Piping on galvanized steel, so no rust. http://twitpic.com/8oeg7z
New extractor from the bottom view with flexible pipe attached http://twitpic.com/8oeki1
Hmm the welding on the pipe isn't as clean as the premade parts http://twitpic.com/8oexvu
Same goes for this one http://twitpic.com/8oexyp
How my new exhaust looks like on the "surface" http://twitpic.com/8p226p
Fake twin outlet lol http://twitpic.com/8p22bq

all an all, really damn dirt cheap and cheerful setup for MYR770 lol

Really loving the sflow back pressure/scavenging effect, i can see how this shit can dramatically improve my FC already.
RPM doesnt drop like a rock and i can just let my foot off the accelerator. the car still continues to hold its RPM and speed. which feels amazing LOL

of course, pros and cons, while the low RPM/power band is awesome, my upper power band/top end suffered
torque didnt seem as high as before after the 5k rpm. havent got the chance to fully try it out though.
that, and Malaysian roads' traffic jam, i guess i *CAN* live with some minor setbacks ^^;

oh as for the noise level, from within cabin, A TON quieter lol. and engine vibrations seems lesser maybe cuz the car breathes easier?
from outside especially near the muffler, it seems noisier. i think i can conclude that, the exhaust pitch is lower (more bass/less treble per say)
lower pitched sounds are harder to notice after all, especially within the cabin with more "resistance" from it.

i wish to have improvement on acceleration, low voice, not too noisy, single titanium tip design. thx

Oh my, thanks bro for your feedback. About the setback, yeah maybe u need to wait it to run in and don't overpush the low end in order to have better top end. Drive safely k. Really appreciate all the pics and writings

---

Added on February 28, 2012, 11:39 pmYes, basically we customize the system to what you like it to be; sound,performance and design. Do call me, thanks.

1.6" midbox I don't have. 2" diameter, inlet bout 1.85", yes i have. Unless we fit in test pipe 1.6" into the midbox. U can sms/call me for the best price, thanks.

3-1 only we have, shipping at the moment i have MOQ/MOV, means need volume, do call me if you're interested, thanks.

If just change twintip, bout 1xx only include install, do call me if you wanna do.

That's easy bro, why not you just drop me a sms, i will get back to you asap, thanks!

This post has been edited by kweng84: Feb 28 2012, 11:39 PM

i think my exhaust is pretty "burnt in" now as the entire extractor is brownish/bronze ish in color

but yea, in the future i might be playing a bit more with something like a 4-1 tuned length or something, but thats prolly something in the really distant future
thanks again for the setup

and yea, ah hung is a good mech, the foreign looking workers not so much though
ah hung did the piping bending/cutting/rear trims, basically almost everything while the welding are done by the foreign looking workers

discussed this abit with a few people, they also agreed that its better that way, as welding faults can be fixed easier than piping bending faults

thanks kweng. sounds good. give me time to sought things out first. probably hv to change my muffler first before changing the tip to make sure it fits. will call u upon confirming everything.

Oh, that's true, bending is more important. Of coz, I believe that happens when he has other cars to do at the same time, else he will do the welding. Anyhow, if any issues, we provide free service to fix any weldings in future.

Sure, thank you.

aye thats what sifu told me too so i can ignore the cosmetics on the welding
touch wood no issues in the future

bro.. quote me price or each piping.. 2inch ( Stainless steel , AL steel ) . for Honda City SX8

can u suggest n quote me best performance bt silent setup..minus extractor..
for persona 1.6 auto..budget is round rm600
also cn u pm store location near shah alam, thanks

Haha. Memang touch wood la, i said that just in case only, at least u got my words

SMS me, price will be quoted right away, thanks. Let me know if you got anything else u wanted to do together, price will be better

0125629713

Sure can do at that good budget. SMS me in order to get my location details, to keep track, thanks.

0125629713

Hi Bro, can recommend me what is the best setup for Tyt Avanza 1.5 Auto? I'm thinking to upgrade my exhaust system, what is the best setup to achieve better power & FC. What is the best price also?

Bro, check ur inbox

Hi bro, the way to optimize any power of any car is subjective to whom the driver is, as well as FC wise. I need to know your way of driving Call me if possible, else just text me and come to my place right away, thanks.


I would love to...there are still 3pages of unreads

SMS/Whatsapp would be a lot faster for my response, thanks!

Please advice on: -

1). 2 inch adjust pipe for Proton Wira 1.5 (Auto)? It this size Okay?Original size should be 1.5 inch. Will 2 inch getting better petrol consumption & pickup/power?

2). What is the best size for Proton Wira 1.5 (Auto) for better petrol consumption and power too?

TQ

TQ