kweng, went to ur shop today (chery tiggo)
i guess u changed my exhaust system from 3-6 (refer pic below). AM i right?


wanted a quiet exhaust with a bit of vroom when pressed on hard.
can say im satisfied with yr work + ur workers (the long hair, botak, normal guy = helpful bunch of workers)
will review on the FC, but performance wise i can feel its improved, dono psychological effect or what.

btw also to post this to remind me of the date of installation. & updated in my signature.



This post has been edited by bladekiller: Nov 30 2011, 06:03 PM

I have a auto kenari that i believe the exhaust is going to spoilt soon.

PM me a setup that is not too loud with better acceleration than stock. Can I still use the original piping?

tips: My Wife normally drive the car

where is your branch in setapak?

Bro, Please pm me mod for my Nissan Sylphy and budget need? I wan better torque & pick up, also your nearest shop in Kepong? Thx

Hi bro Kweng and All,

Just got my car back today.. changed extractor and the whole exhaust set to SS.. First impression, Pick up improve very much!. For those who drove a sentra 1.6 auto before you should know how heavy the car is and how the pick up sucks.. after changing everything. the car feels light... naik bukit also senang only. FC wise, would say got a bit of improvement, normaly the first quarter of my fuel indicator only can jalan 70 km, after changing the ext and all, can go 100km.. stil monitoring FC tho. Whatever it is, just would like to thank bro Kweng for the good stuff and his sidekick for their advise.

Do not hesitate to deal with them.. results are very obvious.. seriously.

plus, for those who dont like loud noises, can ask them to make it as silent as possible... mine like deep bass... very shiok listening to it

---

Added on December 2, 2011, 10:59 pmBro Blade Killer, its no psychological effect.. memang real improvement.... sure u enjoy bringing ur car now rite..

---

Added on December 2, 2011, 11:08 pmaha, i think i had the same sound like that.... not so loud one rite?? or issit becos my laptop speaker very soft?? i got short 4-1 ext, nenas, "2 tabung, 1 panjang 1 bulat" ( ah Hung's exact words) and an s flow ....

This post has been edited by IAnK: Dec 2 2011, 11:08 PM

bro.... full SS piping from extractor to end for vios 06... location kinrara

can i know why must put in double bullet than single bulllet?

after changing extractor car heat temp goes very high,anyone experience?

Just done my car at your shop... Very satisfied with the professionalism of the technician ah Hung... The exhaust sounds exacly the way I wanted to... Work is done carefully by all workers... Will definately introduce my friends to your shop if anyone wanted to change exhaust... And also, VERY NICE PRICE...!!

double bullets how ah? any pic/sample for me to see?

Would like to enquire exhaust piping and welding only , Honda Civic EG9 from extractor to silencer ( my own ) to my back muffler.

How much will it cost ?
Stainless steel and galvanised steel.
2.5" outer diameter ( how big is the inner diameter ? )

Thanks URGENT

Hi Bro,

Hope you doing fine yea,

Could you recommend me what type of pipe should i use since my car "Satria 1.6" is auto.
i prefer to change standard steel extractor and others.
how much it would be the price included installation and where is your location located.

million thanks for your reply and help.

Hey mate, your exhaust pipes can fit all types of cars, including MPVs? I'm driving a Honda Edix (6-seater mini MPV) and may want to change the muffler to something more stylish, but not too eye-poppingly big or noisy!

What do you recommend and what is your best price, including installation? Thank you!

Bro do u have original civic type r muffler?pls pm me.

Can PM price for waja? Need piping after downpipe till exhaust. Piping 2 inch. no mid bullet but need Muffler. Prefer silent muffler without sacrificing the performance.

Please PM me price
1. header extractor for naza citra - custom 4-2-1 & OEM. with & without installation.
2. custom header extractor for naza citra with complete custom piping-mufler with installation.. or advise any custom setup that suitable for citra..

Thanks

Sifu K.weng,

U got PM and SMS.

Hi there. I couldnt find ur address. Kindly PM me ur shop addresses. I'll drop by the nearest from my location.

Hi bro, you're welcome Serdang (HQ).
SMS me for the setting.

Yes you can use original piping (only if it's still in good condition...ori pipes tend to rust)

You can start with center portion and rear muffler first, do call me for further details, thanks.

Thanks bro Happy New Year!

Bro, you need piping alone or full system? Do sms me directly, thank you.

Hi bro, how many percent it went up?

A lot thanks to you bro

Hi bro, have you called me already. I think i got the similar request, if it isn't you, please call me straight since you said Urgent. Thanks.

Hi bro, for satria, i recommend the rear end follow ori route with a good size of s-flow to retain backpressure for auto tranny purpose. The rest i will text your phone, awaits your sms. Thanks.

Yes bro, they are universal. Hmm, did you fit any bodykit already? If you don't mind, do call me and chit chat ..i need to know more details


Hi bro, auto or manual? Without midbullet is not really recommended for FC wise. Do call me directly for faster response, thanks.

Hi bro, i already have Citra stock..4-2-1/4-1 aluminized steel or stainless steel..both also have. You can call me anytime, thanks.


Hi bro, which branch are you interested, appreciate if you could sms or call me straight, thanks!

WENG, AS YOUR PRICE STATED STILL REMAINED RM 290 FOR SS 4-2-1 FOR ELANTRA

WHY YOU SAID RM 480 THAT DAY

IS IT BECAUSE WHEN SOME QUALITY PROBLEM OF YOUR EXTRACTOR (LEAKING), THEN I WANT TO EXCHANGE AND I NEED TO PAY MORE???


KWENG84,

ARE YOU USED TO IGNORED YOUR CUSTOMERS LIKE THIS???

YOU CAN BUMPED YOUR THREAD BUT NOT EVEN A SINGLE REPLY TO ME?

HEY, COME ON... I KNOW IT'S NOT SO MUCH MONEY I SPENT BUT STILL CONSIDER ONE OF YOUR CUSTOMER...

JUST FELT THAT IT'S NOT FAIR BECAUSE THE QUALITY ISSUE OF YOUR EXTRACTOR IS NOT MY PROBLEM, RIGHT?

Hi bro, first of all, sorry for the mis-look for this thread that I did post prices here but i didn't update.

My Apology to everyone else also. But we never cheat anyone or giving other prices to different users as my prices are in Book Price in every branches of mine. That's the same price i provide to dealers.

But as you can see the few links below include my facebook and my main thread, the price has been updated since 5th of November 2011.

http://www.facebook.com/media/set/?set=a.2...23175324&type=1
http://forum.lowyat.net/topic/317216
http://forum.lowyat.net/topic/742828

About RM480 (that's the stainless steel extractor which the head flange is also stainless steel). As for the header, it is really RM380 since 5th of November 2011.

Not solving customer's issue is REALLY NOT OUR PRINCIPLE of doing business. Whatmore we talking about cheating customer. Bro, i'm not ignoring you. If you notice, i don't reply the threads here as much as i did last time due to tight schedules. BUMP BUMP threads are easy to do when I use my smart phone.

Sorry, I would like to call you instead but i forgotten your name, is it Eric? Please give me a call anytime soon, I hope I can deliver my explanation to you.

-K.Weng-
0125629713