1.3v can not la..
now i oc untill 2.5 Ghz.....but need 1.425v .....just can stable..
i try to use 1.4 or less , when boot at desktop then will suddenly restart pc...
and now my memory runing DDR800 already.....
but is 5-5-5-15-19-(1) 413Mhz..
anyone know when only need to pump chipset and Hyper Transport voltage? coz i duno what is this 2 thing...

My AM2 rawks. It's still very early stage with stock AMD cooler somemore.

2.81 @ 1.45V.

Nope it's not the least it could do. That one is just a preset vcore. I normally like to slap up the vcore to certain volts and start ocing. If things goes as planned, I'll start reducing it bit by bit.

Now I am doing 2.85 at 1.425v still priming. An hour had passed now. I really hope my tforce 6100 can cope.

sorry i wan to ask something~

Did DFI Infinity UltraII M2 , CPU tem will lower than System Tem??

My DFI CPU tem is about 26~29c but my system show about 35c did it showing wrong tem??( i not in AirCond room)

i using Smart Guardian and Speed Fan both showing same tem~ !

Did anything wrong with this tem??Because last time my Asus M2N-E cpu tem always higher than System~

Other DFI user what is ur tem with Default Speed??

hmm, my cpu couldn't boot up if I try with 260 HT...

Is this problem only occurs on dual-core? I saw a lot of single core (Orleans) could OC more than that easily...

I guess I have to CPU burn-in again.. (I already tried CPU burn-in to get 240 HT up to 250)

Recently, I incorrectly flashed my Biostar Geforce 6100 AM2 with the bios for the TForce 6100 AM2 (CR51A811.bst). It actually works without a hitch and I'm really impressed with the many differnet options you Tforce users get with your TF board in the bios. I especially like the OC Navigator and CRP reload section. I tried OC with this bios and succeeded too, using both auto and manual but manual is a bit challenging since I have an easy to use DRAM timing section with the A505 bios (GF). I didn't want to risk anything too extreme though and quickly flashed back to the correct A811 bios after a some fiddling around with the tforce bios.

Actually you don't even need to mod the mobo to run SLI. Just google for modded Forceware drivers and install it.
As for SLI bridge, you don't need it for low-end to mid-range graphics cards because it doesn't transfer that much bandwidth until it needs a bridge. In fact, most cards can now run SLI w/o a bridge.

Is it really worth it to upgrade from 3000+ to 3800+ x2? Any price slash from amd again within this 2-3 weeks? ha ha ha

no price slash imo.maybe after the launching of 35nm proc, present X2 will be slashed.   but then, upgrading to dual core only if u feel the necessity..i want them too, but then now it is good for me to play few games, so i wont bother.

Guys, my orleans 3200 clocked at 260x10 will sometimes refuse to boot up when i do a cold boot. the biostar watchdog kicks in and tells me to reduce or reset the CPU speed during POST. 

however, after doing a CTRL ALT DEL it starts normally or I can just go into BIOS and exit again and it'll start normally. At 260x10, it has completed more than 24 hours of Prime95 and various other burn in runs like sandra and 3dmark loops. So why doesn't it want to cold boot sometimes? Is this an indication of a PSU problem? Not enough juice?

Oo.. im clear nw.. thx 4 telling!
so socket 940 is a old design 4 opteron proc rite?