power logic is not true power..... already been mentioned thousand times before. please refer to sticky thread if you want to discuss about power supply.
AMDŽ Socket-AM2 Overclocking thread, discuss our setup/overclocking issues
|
|
 Sep 14 2006, 11:05 PM
Return to original view | Post
#161
|
 
VIP
15,903 posts Joined: Jan 2003 From: Miri   
|
|
Quote|
|
|
|
|
Sep 14 2006, 11:27 PM
Return to original view | Post
#162
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
QUOTE(fantasy_kenny @ Sep 14 2006, 10:47 PM) finally, i done to moding my waterblock n do the default vcore oc.... kenny, can u provide your G.skill part number? i'm still suspicious that u mention yours had fatbody in it. obviously if u read XS forum, you'll know G.skill never use fatbody Micron.AMD Athlon 64 X2 3800+ AM2 @ 1.36v 2.8GHz stepping 0622XXX DFI LanParty UT NF590 SLI-M2R rev.A1 Socket AM2 G.Skill F2-6400PHU2-2GBHZ DDR2 1120MHz @ 2.2v 5-5-5-15 (Micron D9XXX Fatbody) Cool-Tred Vostok Water Cooling AcBel i-Power Gold 550W PSU 2x 250GB Hitachi Deskstar 7K250 SATA-II NCQ (RAID-0)  pre-0604 is Elpida 0605 onward is D9GMH D9GMH can do 3-3-3-x DDR2-900 as well, and DDR2-1200 CL5 is not too rare refer here : http://www.xtremesystems.org/forums/showth...t=101762&page=6 This post has been edited by soulfly: Sep 14 2006, 11:29 PM |
|
|
Sep 15 2006, 12:00 AM
Return to original view | Post
#163
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
with that DFI Lanparty... I'd torture my Micron with 3.0v!!!! lol
|
|
|
Sep 15 2006, 12:19 AM
Return to original view | Post
#164
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
QUOTE(Hayase @ Sep 14 2006, 11:58 PM) Hi again..regarding to my question..i m on stock fan..anyone got any guide to clock my x2 3600+..on gigabyte m55sli-S4...i m noob on overclocking =D Please refer to the sticky threads for basics of overclocking |
|
|
Sep 15 2006, 05:12 PM
Return to original view | Post
#165
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
QUOTE(kopaks @ Sep 15 2006, 03:31 PM) tq for ur support.. regarding to HTT and ram divider.. correct me if im wrong..if mine is 2200mhz wth 200HTT,multiplier 11, 667mhz for ram.. means if i set the HTT to 250 means the ram clock should be at 786 as the divider is 7? so i will get 2750 mhz...huuuu is it true?? If you use Multiplier 11x and HTT 250MHz, your cpu speed will be 2750MHz. And let say you choose DDR667 divider for RAM, referring to the table your DRAM value should be CPU/7 DRAM = CPU/7 = 2750/7 = 392MHz = DDR2-785~786 correct... |
|
|
Sep 16 2006, 09:13 AM
Return to original view | Post
#166
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
QUOTE(Crazyboyrs @ Sep 16 2006, 03:43 AM) Tested today newly bought good job there, 2.75ghz with less than 1.4vAMD Am2 3500+ Corsair Value select 1GB Biostar T-Force 6100 AM2 stock heatsink..( Anyone got any idea how to fix Hyper 6 or Hyper 48 to this board? now two of the HYPER is crying waiting to go to the new board) First attempt...DDR timing all Default..Juz adjust the FSB,, HTT to 3x Stock 2.2 Ghz....OC to 2.75 Ghz...PI 4 MB stable..haven try prime..Dota for hours no hang... any pics or the corsair 1GB? it could be relabelled elpida or micron... let's have a look |
|
|
|
|
|
Sep 18 2006, 10:57 AM
Return to original view | Post
#167
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
QUOTE(Algojo @ Sep 18 2006, 07:04 AM) First born of my AM2 if i'm not mistaken, you're migrating from socket-A arent' u?AMD3000+ DFI NF4 UI M2 2 x 1GB Kingston DDR2 533 [ Micron D9GCT ] Galaxy 7300GT   Add me to the list !  push some more... 3000+ is too easy to clock to 2.5ghz with low voltage, on stock heatsink. and D9GCT is sooo easy (exagerrating) to hit DDR2-1000 CL5 with low voltage as well  |
|
|
Sep 18 2006, 08:47 PM
Return to original view | Post
#168
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
QUOTE(lucklyghost @ Sep 18 2006, 08:27 PM) soulfly! u oc to 2.8k also using amd original HSF? yes i am.... too poor to get an aftermarket cooler and regretted selling off my xp-90 which i used for my s-754 last time. |
|
|
Sep 19 2006, 10:57 AM
Return to original view | Post
#169
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
QUOTE(pcmoddingmy @ Sep 19 2006, 12:28 AM) Btw, screw those shops that listed RM555 for the X2 3800+. All those who listed that price is only applicable with mobo bundle... bah! AMD should really know about this... If we really need a mobo, we won't buy from them ah? Why must force ppl to buy the CPU+mobo bundle to get the CPU at RM555? Maybe they can jack up the mobo price when bundle... sigh As far as I know, C-zone is one of the only few shops that displays 'actual' price list. Not sure whether you checked them out or not.Anyways, RM565 is the best price I got for the X2 3800+ AM2 CPU (w/o mobo). I know there's a bashing thread going on about Sri Comp here but the sales person who dealt with me was pretty cool... I even gave him some tips on how to read the CPU codes  One of the shops thought I was a n00b and quoted me RM580! |
|
|
Sep 19 2006, 01:40 PM
Return to original view | Post
#170
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
QUOTE(tachlio @ Sep 19 2006, 12:12 PM) bro u think which aftermarket cooler best for AM2 now? Zalman CNPS9500-AM2 = performance + quiet |
|
|
Sep 19 2006, 03:09 PM
Return to original view | Post
#171
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
QUOTE(8tvt @ Sep 19 2006, 02:23 PM) AC Freezer 64 pro good or not.. coz the price half the zalman.. I would recommend Freezer64 Pro as well....cost half the price of Zalman and performs just a little less. Quiet as well.or scythe infinity.. coz this 3 coolers got in our market especially for AM2.. I don't really favour Scythe... they're enermous and heavy. QUOTE(Algojo @ Sep 19 2006, 02:56 PM) This is mine but not prime stable coz havent prime yet play cs while hosting a hlds no reboot. CPU : At that setting, I would recommend to use HTT multi 3x. It is best to keep the hypertransport as near to 1000MHz as possible, not too low or not too high.Btw im new to a64 oc architecture and i got confuse with so many settings in DRAM configuration and divider and the HTT link multi.How to read the multi table in the first post. Current setting : [*] HTT multi = 2 [*] Ram divider = DDR667 RAM : At that speed, I believe you can do 4-4-4-12 easily. Try let other timing s at AUTO first and run it at CL4. Then, memtest it (preferrably DOS memtest). |
|
|
Sep 19 2006, 08:32 PM
Return to original view | Post
#172
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
QUOTE(the_kid @ Sep 19 2006, 09:45 AM) i need help please. Any Gigabyte user can help this chap? Come on... be supportive.i'm new in the computer world. but i have done some research myself for the past year. two days ago i bought me a new rig am2 x2 3600+ and gigabyte ga-m51gm-s2g. i want to overclock it by upto 30% only coz i feel my previos rig is much faster than this inspite of being a dual core cpu. my problem is i cant seem to find anything in the bios to help me overclock it even a little. the only thing i can find is the memory timings which only appears after pressing CTRL+F1. other than that, no more. can anyone help me? which bios has the option on increasing the fsb, multiplier setting, memory timing adjustment and so on? currently my bios version if F5. thanks! p/s: I would ignore Gigabyte in the first place if I want to overclock QUOTE(Algojo @ Sep 19 2006, 07:42 PM) thanx for reply so 411 x HTT multi = HTT Link ? To find maximum CPU PSB (processor speed), just bump the DRAM Speed to the lowest (DDR 400 in DFI BIOS), and start increasing the CPU Clock little by little. For me, I would jump straight to 250MHz, just to save some time...lol! izzit i have to find my max cpu speed before i could bump up to 2.8Ghz?  If not stable, increase the CPU Voltage Just make sure the Hypertransport bus speed does not go far from 1000MHz HTT = (cpu clock) x (cpu-nb bus ratio) And by the way, to calculate the divider, don't forget to refer to the table in the first page ya! |
|
|
Sep 21 2006, 10:14 AM
Return to original view | Post
#173
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
i suggest that u send it for warranty first. it's no fun to OC with a crippled mobo.
|
|
|
|
|
|
Sep 21 2006, 11:20 PM
Return to original view | Post
#174
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
2550MHz prime stable (finish at least 1 round) @ 1.375V bios set
 previously does not pass SuperPi 32M, after some burn-in process it was a success..... |
|
|
Sep 22 2006, 09:10 AM
Return to original view | Post
#175
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
QUOTE(lucklyghost @ Sep 22 2006, 01:36 AM) why Biostar TF550 can not lock PCI frequency ? The latest BIOS fixes PCI frequency lock. I bet you still use the old one.coz i planing to buy a Networkcard, so if i oc but can not lock pci , i scare the card will burn and i saw a setting in Bios there, but i duno wat is for.... Bios -->Advanced Chipset Features---> Cpu feuture -->k8 NPT CIE support ----> 1. Software SMI 2. Hardware CIE this setting is for wat? and if we do overclock , do we want to enable AMD k8 cool & quiet at bios there? If you overclock, disable Cool n Quiet in BIOS. Disable K8 NPT C1E as well... the function works together with Cool n Quiet. |
|
|
Sep 23 2006, 12:38 AM
Return to original view | Post
#176
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
QUOTE(lucklyghost @ Sep 22 2006, 09:10 PM) can help me c c my result .. you have too many things running in the background, plus slow RAM.... which explains 38secs in Pi 1M.still can go ? but run superpi run 1M ...= 38sec..so slow.. |
|
|
Sep 23 2006, 11:23 AM
Return to original view | Post
#177
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
QUOTE(lucklyghost @ Sep 23 2006, 09:46 AM) got ppl teach me Try experiment with Trfc values... if 127.5ns cannot use, try lower one. Use the BIOS built-in memtest to test.if add more cant start pc , try to set time mode = 533/400 and TRfc at DIMM0 To DIMM2/3 = 127.5 izzit rite? |
|
|
Sep 24 2006, 12:01 AM
Return to original view | Post
#178
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
QUOTE(lucklyghost @ Sep 23 2006, 10:35 PM) Biostar TF550 really cant lock PCI and PCI-E la.. Who says cannot? Come on la.... I have used TF550 before. I say can lock, can lah. Probably you did not disable spread spectrum thingy.coz i just flash the bios to latest version...mati lol.. and i have problem of my oc .. i show the result is i set automatic overclock V12 .... he auto help me oc to 250, but i manually set CPU vid = 1.2v Memory =1.9v chip =1.5v Hyper Transport Voltage = 1.2v cpu frequency = 250 NPT Fid control = x10 /auto = also can not.. K8<->SB HT speed = 4x =coz 250/1000 = 4 ..so i set 4x but can not boot up leh... but when i put automatic oc ..will oc help me oc below the result p/s: the automatic overclock option is lame... don't use it. This post has been edited by soulfly: Sep 24 2006, 12:04 AM Attached thumbnail(s) 
|
|
|
Sep 24 2006, 01:06 PM
Return to original view | Post
#179
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
QUOTE(yu_8200 @ Sep 24 2006, 12:22 PM) i'm using AMD AM2 X2 3800+ Windsor F2 wit GIGABYTE GA-M55SLI-S4, 1GB of Mushkin DDR2-533, y i can't overclock my AMD? the motherboard not allow me to overclock, can anyone help me? you got a shitty board to OC, what a wastethanks change to a different motherboard that has better overclocking feature. QUOTE(vey99 @ Sep 24 2006, 11:40 AM) Bros, Different RAM will result different cpu overclocking as well. Remember, memory controller is in the CPU.Due to ram price increase I grabbed a pair of Mushkin Enhanced EM6400 DDR2-800 rams with timing 5-5-5-12 ( 512MB x2 ). I am currently running on DDR2-533, so I stick the ram in and set to DDR2-800 in the bios with timings 5-5-5-12. Then my rig ran fine at stock (AM2 3500+ @ 2.2GHz ). Previously I dint play wif RAM before, and I got to 2.7GHz stable on DDR-533. Now wif the new ram I get crash during everest cpu test at 2.7GHz. My setting in bios is: FSB: 246 Vcore: 1.425 Vdimm: 1.90V (minimum for this ram) HTT 4X DDR2-667 4-5-4-12-2T My spec: Am2 3500+ / Asus M2N-E / Mushkin em6400 1GB. Any comments? I suggest that you start OC from the scratch again since you use differrent RAM. QUOTE(tachlio @ Sep 24 2006, 12:26 AM) i just change my Mobo with DFI ultraII M2 this afternoon~ but after i complete build my PC and i start for 1st time then i check my chipset tem it as high as 59c sometime can hit 62c with just stock speed... no OC ady so high??soulfy, u run at what speed now?? still using stock chipset fan?? currently not doing any max overclocking, but now doing burn-in at 2.6ghz. i'm trying to make it run at the lowest volt possible. by the way... NF4 chipset is really hot compare to nF500-series. |
|
|
Sep 24 2006, 10:33 PM
Return to original view | Post
#180
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
QUOTE(Complete @ Sep 24 2006, 07:37 PM)  pls help me~i just get the DFI NF UltraII M2 but after i install all thing my gigabit lan having problem now~ My house is share streamyx so we are using the port so i just connect my Cable to port but seen it got problem with my Network Device~ it keep connect then disconnect~~  but if i straight connect to Modem i can connect~~ why this happen??i got try other port and using other cable. i am using latest bios~~ did i need flash bios ?? if need how to flash bios? can anyone help me~  Really wanna le~QUOTE(lucklyghost @ Sep 24 2006, 09:46 PM) the first picture is i set bios auto to help me overclock it .... different setting different voltage... it's normal for K8 architecture.below is the result.. [attachmentid=139031] this 1 is use 1.2v can oc to 250 wor...so geng... then i hear soulfly them say set manually. ..... then i duno why if i oc to 250...1.2v manually cant boot up....must increase to 1.4v only can boot up... below is my manually oc result.. [attachmentid=139032] got any suggestion? |
|
Topic ClosedOptions
|
| Change to: |  0.0433sec
 0.65
 7 queries
 GZIP Disabled
Time is now: 9th December 2025 - 12:42 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.