2.7ghz stable at 1.35v dota and 3dmark2003/5/6. But I cant set in bios, so cant prime it. Anyway your bios link is broken.
Got alternative link?

http://lejabeach.com/Biostar/6100-550/6100550bios.html

Anyway... what stepping is your Manila?

This post has been edited by soulfly: Jul 26 2006, 07:53 PM

LBBVF 0618GPMW.

Someone here is using the same unit as mine. Click here

Anyway, How u flash the bios 703. It said, the string is not match when i using Winflash. You flash in window or bios?

[Edited] Problem Solve. I flash using disket from bios. Now priming at 2.7ghz default. Not bad for a Rm1xx processor.

This post has been edited by Cyclone87: Jul 26 2006, 08:25 PM

not bad eh...... 2.7ghz @ 1.35v

my 0620 SPAW not that good.... default voltage can run 2.7ghz too (3dmark) but not prime stable.

did u add extra volt for chipset or hypertransport?

This post has been edited by soulfly: Jul 26 2006, 09:11 PM

2.4ghz sempron vs 1.8ghz a64 who's faster?

i would say 2.4ghz sempron

clockspeed wins

Erm, your default not 1.35v? That 1.35v is my default, but i havent prime actually. No time for it. Tonite perhaps

I notice something blocking me again at 340-350HTT like what happen at 275HTT.
I stable 375*8 @ 1.55v at window with clockgen, but in bios, it cant boot.

My hypertransport is 1.25v since i running the ratio at 2x . Chipset voltage is 1.6v. But cpu temp abit crazy. I touch my heatsink abit warm, but temp detected only 21c.

This post has been edited by Cyclone87: Jul 26 2006, 09:26 PM

my default is 1.35v

but now it's only prime stable at 294 x 9 @ 1.4v .... i refuse to add more voltage at this point....everything performs just nice for now.

Bring to the max for a week.
I gonna feed mine voltage of 1.5-1.6v and see what it can do. Then stop and find my suitable speed for daily use.


The sempron is the cheapest part in my system. Even my casing worth more then it.

This post has been edited by Cyclone87: Jul 26 2006, 09:39 PM

oh ok.now waiting for modded bios for giga m51s2g if there's any.cant do shit with this board only play fsb.prime 9 hrs stable at 306x8.if anyone can mod pls helpla

errr... guyz which AMD X2 proc & mobo suitable for overclocking?

well,i left 1 unit same stepping with u....

haha

Haha, i should thank you for the good stepping actually. Anyway, now still priming 2.7ghz at default voltage.

ofcourse high cost one..
budget range
dfi infinity.. sure good..
i'm using Asus M2N-E.. this board is stable.. even if u oc and cannot boot at first time becoz of unstable settings..the next time u boot it's hold cpu default so can enter bios easily.. so far no jumper reset while attempting oc..
the only cons is vdimm ram max 1.95.. i'm looking for modding bios..

best...

stock voltage can hit over 60% speed....

Processor ...definitely 3800+ X2. Mobo depends on your budget....

My list would go for:
- Biostar Tforce550 ... around RM350
- DFI Infinity UltraII-M2 ...around RM435
- ASUS M2N SLI Deluxe ...around RM790

juz got the DFI infinity NF UltraII-M2 stock...

but no time to test

mobo with SLi budget not above RM500.... what bout Jetway mobo?? previous model Jetway 939 GT4SLi i seen my fren using AMD Athlon ES proc single core can OCed till 2.8Ghz...

This post has been edited by zeustronic: Jul 27 2006, 09:56 PM

Athlon64 ES can easily hit 2.8ghz with 14x multiplier and the right voltage. But, jetway brand already busuk. They was once caught using normal or even low end capasitor for their OC-Con mobo but claim it was 100% jap capasitor.

This post has been edited by D@rk: Jul 27 2006, 10:19 PM

can tell max vdimm and vcore?

i wonder u use or not sli setup..
the cheapest sli board i saw in lowyat plaza is msi @ Rm550..
maybe got someone selling other board in the LYN..