Are the show girls hot or "ah so" type?? That's what more important...not the products!!!

obasan type... lol!

i guess the fair is just to 'alert' about the pricedrops ...lol!

links to go..
http://www.hardwarelogic.com/news/128/ARTI...2006-07-05.html
http://enthusiast.hardocp.com/article.html...W50aHVzaWFzdA==
http://www.phoronix.com/scan.php?page=article&item=483&num=1
http://www.pcper.com/article.php?aid=192&type=expert
http://www.short-media.com/review.php?r=316
http://www.firingsquad.com/hardware/amd_at..._64_fx_62_5000/
http://hardwaresecrets.com/article/328/1

Lolx Quite ok ... not bad also. Ya, I agreed with soulfly that they are trying to push out the price drop for the processors. The booth itself really nothing much to display also. Just flyers and no processors as far as I can see.

Regards,
Hughie

Manila = Half L2 orleans?
Just got TForce550 biostar from fantasy kenny and the first thing i do in window is test 2.8ghz with memory setting running at default and 2T. My memory score in pcmark lower den my S939 A64 running on DDR466 tight timing. Gonna prime it later.

This post has been edited by Cyclone87: Jul 25 2006, 10:27 PM


Attached thumbnail(s)

any M2N-E user that hates the Vdimm limit? time for some Vdimm mod... lol!

http://www.xtremesystems.org/forums/showpo...20&postcount=22

for M2N-E or the SLi ??

Just found bios for DFI

http://us.dfi.com.tw/Support/Download/bios..._FLAG=A&SITE=US

Major Reasons of Change:
1. Fixed some DDRII Module can't run 800MHz 1T timing.
2. Fixed some ECC DDRII Module function failure.
3. Fixed low speed DDR can't run high speed.
4. Fixed SCSI option ROM fail in PCI slot 1 and 2.

no tools to do Vdimm mod though look simple..
but i tried last night with 1.95v can go till 233fsb which give DDR 776 (388)..
if only can give me more voltage i can expect to go higher.. no buy DRR800 maybe..

both is just the same.

I just found out that , TForce550 dont have PCI lock. Anyone to clarify this?
I cant boot with 274HTT at bios no matter what vcore i put. At 274HTT, i prime stable at 1.075v. But 275HTT wont boot at all.
I download Clockgen 1.047 with nForce5 support..and it report my pci is running at 40-50mhz. .


Soulfly, any problem going above 270-280HTT at bios?

This post has been edited by Cyclone87: Jul 26 2006, 06:47 PM

if i don't wanna OC,what budget board is better for x2 3800+?
biostar 6100 @ msi K9N-neo @ biostar tforce 550 ?

This post has been edited by yellow_label2207: Jul 26 2006, 06:56 PM

Duwan oc kaw kaw, any board also suit you. Infact , that mobo, lack of memory setting. You will need a good memory incase you wan to overclock next time. With a chiplak DDR533/667, you can easily hit 270-300HTT .Above is abit hard because your ram will force to run at CL3.0 .

im not going to OC at all coz i really dont know how n not brave enough to try. so what board is the best value for money(from my list).

which one is better for am2 abit kn9 sli or msi kn9 sli platinum?

MSI K9N Neo will do just fine I guess....

or Biostar 6100-AM2 if you like built-in graphics

* u mean MSI K9N SLI Platinum?

anyway.... don't have much comment on both mobo, but currently the ABIT KN9 SLI's BIOS is not stable enough.... had issues with certain RAM modules.

cool.getting the am2 x2 3800+ with biostar 6100 @ K9N neo by next week. drooling already.

I used to have this problem. I'm not pretty sure how did I solve the PCI lock issue.... but I guess BIOS flash helps. You can get the latest one (Bios 703) here: http://www.lejabeach.com/Biostar/6100-550/N5taa703.rar

This BIOS so far allows me to get past 285mhz HTT limit and locks my PCI bus to 33mhz.

Hmm..but i was using (n5taa615.bst) bios from biostar official web. It should be the latest. Perhaps i should give your bios a try. It really to see my PCI went above 60mhz when i was on 2.8ghz. My Networkcard burn in 3sec .

what vcore did u use for 2.7ghz?