I have a better way to do--Download something and torun it off. Of course, you need to enable to background download features.

well its just a myth...

Or u can plug in ur Play & Charge kit, let it charge and turn off the console.


I agreed

The charge takes 6 hrs on average.... way too much....

just buy rechargable AA batteries

sure owns the charge kit

about the heat problem...izit better to place ur xbox vertical? since the holes are located at the left n right side...

^Horizontal is better, the hole on the bottom is bigger.

oh...ok thx...

just brought 2 stupid CPU fan and a cheap IPod charger. will complete the "attachment" tomorrow. hahahaha

^You want to put it at the back or at the side of it?

I'm thinking of doing it at the side of it, fresh air comes in on the side, hot hair goes out at the back, but it'll make you Xbox looks ugly though.

how do i identify xbox 360 wireless wheel manufacturing date?

i dont want to end up with a early edition unit where need to retrofit the wheel.

i use air cond blow direct to the console also my zypher set 3rod,adding fan will not help much.

I just did mine, i can say it cools the console dramatically. However it's a falcon.





external specific hot spot is not felt anymore. but, RRoD coming out or not still early to tell. Keep fingers cross.

i already did what u did bro still my zypher died bro.

internally, the set is hot.. u can draw the heat out but actually , the heat sink is damn hot

I know zypher & xenon sill died even with most powerful intercooler available....but mine's falcon and the heat at the external shell did reduced dramatically.

It's not only hot, it BURNS.

I heard that the Jasper's heat sink is hot rather than flaming hot compared to old system when full load, but of course...in air conditioned environment....

I'm waiting for another 8 months to see if jasper further reduce the 3RRoD problem. My console is still under warranty afterall

This post has been edited by navigator: Jan 3 2009, 01:37 PM

what is saw internally in my jasper unit the gpu sink has a heat pipe going 2 wards the cpu heat sink meaning that the heat is transfered out of the gpu sink which is under the dvd rom drive,i somemore blow ac to the console the exhaust air is cold no heat at all.

it looks similar to falcon's cooling system:



thd zypher i used b4 is flamming hot even when i blow ac to it.

This post has been edited by S4PH: Jan 3 2009, 03:41 PM

I tot the 2 heatsink design is there since Zephyr????

Just now tried falcon @ a/c room playing Sonic unleash demo...also no heat at exhaust at all.....

Some how I still attach that 2 fans and move it out from that a/c room....

I just hate that the original exhaust fan is too weak so I DIYed the fan. it's a piece of mind for me, even though i know it won't help much if it comes........

---

Added on January 3, 2009, 3:47 pmM$ recommened let it stand vertically as the hot spot is at bottom if you let to horizontal.

You might consider add a notebook cooler if u want to let it sit horizontally. or just lay it at a flat & clear surface....

This post has been edited by navigator: Jan 3 2009, 03:50 PM

zypher dont have heat pipe from gpu sink bro start with falcon got heat pipe and i presume the cpu sink is also bigger on the falcon n jasper sets,falcon still make use of 90nm gpu size where jasper is 65nm as said in reviews that the 65nm sucks less power and dissipates less heat,hope my jasper will not get the dreaded 3rod.

CHECK THIS LINK TO FIND OUT MORE ABOUT JASPER SETS:
http://www.engadget.com/2008/12/10/inside-...ythical-consol/

This post has been edited by S4PH: Jan 3 2009, 04:44 PM

can i know xbox 360 got wifi?or have to buy extra accessories?