Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

Router Configuration Riger DB102 modem thread, Technical support

views
     
syafeerul
post Jul 26 2008, 04:13 PM

Getting Started
**
Junior Member
134 posts

Joined: Jan 2007
try to reset your modem. reboot. make new connection.


Added on July 26, 2008, 4:31 pmneed help in speed setting of this modem..

my streamyx is supposed to be 1Mbps. surely can't get that speed
but looking at the DB102 config menu, my max speed only 320 kbps
is there any setting that can increase the speed?

currently i set the modem to work as router.

thanx!





This post has been edited by syafeerul: Jul 26 2008, 04:31 PM
syafeerul
post Aug 6 2009, 02:53 PM

Getting Started
**
Junior Member
134 posts

Joined: Jan 2007
this modem is not suitable to be used in router mode or ppoe. using this causes it to loss connection after hours of usage.
use it in its original state: bridge. this will give less disconnections.

port forwarding? i can't commit and reboot. it hangs. so my attempt on port forwarding was never a success. read around.. many faces this as well.
but try it. some works. mostly don't.

if data light is OFF. check:
1. phone line is ok?
2. try direct connection which means no splitter used. sometimes faulty splitter.
3. if u usually use auto connection or ppoe or router mode --> look at "smart config" where ur mode should be there. set it ppoe and put in ur streamyx acc + pw.
4. still OFF? call TM.

just trying to help. if u read around this are the possible ways of solving it.
and till today, im still trying to find ways to do port forward.

 

Change to:
| Lo-Fi Version
0.0267sec    0.37    7 queries    GZIP Disabled
Time is now: 29th March 2024 - 01:55 PM