i think depends on my modem/router's setting, which is configured at 25 , errr...what's Open Half TCP IP anyway...higher good or lower?

if set higher, then you can connect with higher speed (if tmnuts didnt throttle)
which it can connect to more peer, and get more speed

but if you use too many those half-open tcp connection
some modem may not support it, and you will experience dc frequently

anyway, at the new half-open tcp limit, i have set to 50
then i go to http://192.168.1.1/ and set to 50 also

but in my bitcomet settings, i juz set to 10
---------------------------------------------------------------------------------------
who see this before??

what port is that??
see it only in 0.76
his Initiation is Remote
Client Type is BitComet 0.76*DHEv2*

new function for 0.76???

This post has been edited by tan_pang: Nov 13 2006, 04:26 PM

well i set it to...


from default 25/25/75

where to set it in the modem? i using d-link DSL-500T. how to set? thanks.

i use Riger DB102
to set it, go to Services > Firewall
and can see these settings like the sniper69 showed

in Dlink......
see is there any option call 'Firewall'
and see is there got any settings about 'Max Half-Open TCP Connection'

i dunno anything about Dlink...

i'm not sure bout your D-Link, but i do sure...u can go to your modem/router's IP and find the FireWall settings

i have this curiousity...since the "Max Half-Open TCP Connection" is in FireWall configuration, is it workable even with FireWall (modem/router's and windows firewall) disabled?

now not only this ip


i found another too

this ip using 0.76 too!!!
how they can make it??

and what the special for it??
-----------------------------------------------
juz now find something that funny in 0.76
go to Option > Language
and see the last selection


This post has been edited by tan_pang: Nov 13 2006, 10:18 PM

how to change the IP address ah? it is useful to change the ip address?

what you found there? ppl changing ip?

you didnt notice that there a "[inaba]19410" beside that ip??
and also [圣域雪狼][1156] beside the 2nd attachment

This post has been edited by tan_pang: Nov 14 2006, 06:48 AM

ur WAN IP is dynamic and always changes whether u reconnect to streamyx or any ISP (however, ur LAN IP is fixed as wat u hav set)


I think tat's what we hav been wondering about earlier the "Not Logged In" icon at the bottom bar (as I read somewhere tat function is supported at China area)

i think so.. front is their nick name n back is their port num..

i have found this, will increase your download speed. at protocal encryption (avoid ISP block BT protocal) select Always, after i do this and using v0.76 my download speed increase up to 70+k,....

This post has been edited by mun88: Nov 14 2006, 09:33 AM


Attached thumbnail(s)

I did try this but not help much.Maybe no luck here. BTW do you still do port forwarding?

this protocal encryption is very old already.... i feel that it wont always work

is work for me, after i do this my download speed over70+k.. i using latest version 0.76, if i use 0.70 is too slow

This post has been edited by mun88: Nov 14 2006, 12:50 PM

Do you enable port forward?

i aledi use it before the last month throttle
at that time, tmnuts aledi start to do BT shaping
but with Protocol Encryption enable
they cant check it becoz the bt have make some packet on it

now, they use another technology that can go through this packet
thats why it will not improve our speed even we enable it

try go to check is your download are all from Malaysia IP??
maybe you enable it to let you get data from local ip only
but without enable it, maybe both international and local also cant get

i just installed 0.76 from 0.70...

why all DHT network now displaying n/a???

May i know, in the side tab, there is a list of items such as summary, files, peers, etc etc...What does it mean when all of my peers is local under the initiation tab?Is this normal and what does that mean?